Bedienungsanleitung Fritel IP 1266 (Seite 16 von 24) (Deutsch, Englisch, Holländisch, Französisch)

798524

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Timer function

 To select the timer function, press the "MODE" button until the timer LED lights up. You can now use the rotary knob

to set the desired cooking time, ranging from 1 minute to a maximum of 3 hours. The timer is activated as soon as you

do not touch any button for a few seconds. When the timer runs out, you will hear a short beep and the appliance will

go back into standby mode. You can also see this by the flashing "----" on the display. It is perfectly normal for the fan

to continue working in standby mode.

 If the setting is not changed for 3 seconds after the LED display has blinked, the last setting chosen is always applied.

The display will alternately show the selected temperature and remaining cooking time or the selected power level

and remaining cooking time.

 If you do not wish to use a timer, the appliance will automatically switch to standby mode after 2 hours.

 If you wish to stop the cooking process earlier without using a timer, you can simply switch the appliance off using the

ON/OFF key.

5. MAINTENANCE AND CLEANING

 First switch off the appliance and remove the plug from the socket.

 You can clean the cooking plate with a soft, damp cloth or sponge. If the cooking plate is very dirty, you can use a

special cleaner for ceramic cooking plates.

 The rest of the appliance can be cleaned with a soft, damp cloth. The appliance should NEVER be immersed in water.

Always alllow to dry completely.

 Remove any dust in the air inlet and outlet with a cotton swab.

6. PRACTICAL TIPS IN CASE OF MALFUNCTIONS

Possible error messages

Error message Advice

A sound signal and the MODE

button does not react.

There is no pot on the cooking

plate.

Place a suitable cooking pot in the centre of the cooking zone.

E01

Indicates a short circuit.

Unplug the power cord, wait a few minutes and try again. If the error persists,

contact your sales point or recognized repairer.

E02

The temperature sensor under

the glass is overheated or

malfunctioning.

Remove the plug from the socket and allow the cooking plate to cool down. If the

appliance cannot be switched on again, contact your sales point or recognized

repairer.

E03

The mains voltage is lower or

higher than that displayed on

the unit.

Check whether your appliance is suitable for the mains.

If there is still a malfunction, do not use the appliance. Please address to your sales point. Also when the power cord is

damaged, address to your sales point or recognized repairer.

THE APPLIANCE HAS BEEN DESIGNED FOR DOMESTIC USE. THE WARRANTY CONDITIONS EXPIRE UPON

PROFESSIONAL USE. DEFECTS AND/OF DAMAGES FOLLOWING TO THE NON OBSERVANCE OF THE

USER MANUAL ARE NOT COVERED BY THE WARRANTY.

We are entitled to make technical modifications at all times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fritel IP 1266 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info