Bedienungsanleitung Fritel je 2750 (Seite 12 von 16) (Deutsch, Englisch, Holländisch, Französisch)

397102

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

• NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.

ASSEMBLING THE JUICE EXTRACTOR

• Place the juice bowl on the motor-housing.

• Then place the stainless steel sieve into the juice bowl.

• Now place the lid with filling shaft on the juice bowl and

• Lock the safety bracket in the upward vertical position and Slide the pusher into the filling shaft.

• Place the residue container under the outlet of the lid. Incline the residue container slightly, to

place it easily under the lid. Place a glass under the juice spout.

PRACTICAL TIP: The cleaning process is being simplified by placing a plastic bag in the residue

container. In this way, you can remove the pulp without spilling.

HOW TO USE THE JUICE EXTRACTOR

• First wash the fruit and vegetables under running water.

• Check if the juice extractor is assembled correctly.

• Pull the plug into the socket (230 V.). Switch on the button. LOW = soft fruit-vegetables / HIGH = firm

fruit-vegetables.

• As soon as the motor is running, take out the pusher of the filling shaft and fill it. Do not fill the shaft

completely. Place back the pusher into the filling shaft and gently press down the food. With firmer

apple varieties a.o., you could feel a little resistance. Briefly press harder the apple until it touches the

grater. Then push gently again.

• The juice is running into the glass and the residue into the residue container.

IMPORTANT: Make sure the residue container is not too full. In that case, the appliance will not work

properly or can even get damaged. Always switch off the juice extractor before emptying the

residue container.

DISASSEMBLING THE JUICE EXTRACTOR

• Switch off the juice extractor and pull the plug out of the socket.

• Remove the residue container from under the lid.

• Take the safety bracket with both hands and gently pull them out of the notches on the lid and lift the lid.

• Turn the juice bowl within the stainless steel sieve with your right hand to you and take it out. The

stainless steel sieve is loose, pay attention to it that it won’t drop out.

• Turn the juice bowl upside down on a plate or on the sink to remove the stainless steel sieve from the

juice bowl.

IMPORTANT: The stainless steel sieve is built up of small sharp knives on the grater. NEVER

touch the knives of the cutting surface with your hands. ALWAYS take the edge of the

stainless steel sieve.

MAINTENANCE AND CLEANING

• Switch off the appliance and remove the power supply cord. Then disassemble the appliance.

Open the safety bracket, remove the lid, the juice bowl and the stainless steel sieve. Clean these parts

under running water. Do not use too hot water of a dishwasher.

• NEVER immerse the motor housing in water or any kind of fluid. The motor housing needs to be

cleaned with a damp cloth.

• All the other parts may be cleaned in hot soapy water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fritel je 2750 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info