Bedienungsanleitung Fritel JE 3877 (Seite 14 von 24) (Deutsch, Englisch, Holländisch, Französisch)

506439

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

BEFORE THE FIRST USE

‐ Check if the mains voltage of your appliance (230 Volt) corresponds with the mains voltage in your

home.

‐ Remove all packaging, the label on the filling shaft and the label on the LED display. Then clean the

parts as described in ‘ Maintenance and cleaning’, before using the appliance for the first time.

ASSEMBLING THE JUICE EXTRACTOR

‐ Place the juice collector on the motor base

‐ Place the stainless steel sieve inside the juice collector and gently press down until the sieve is well

fixed.

‐ Place the lid with filling shaft on the juice collector

‐ Slide the pusher in the filling shaft

‐ Lock the safety brackets

‐ Place the Residue container under the large outlet of the lid. Make sure that the bottom of the

container is placed on the support piece on the juice extractor.

‐ Place a glass/carafe under the juice outlet

PRACTICAL TIP: The cleaning process is being simplified by placing a plastic bag in the residue

container. In this way, you can remove the residue without spilling.

HOW TO USE THE JUICE EXTRACTOR

‐ First wash the fruit and vegetables under running water.

‐ Check if the juice extractor is assembled correctly.

‐ Make sure that the speed control button is on the OFF position. Pull the plug into the socket (230 V.).

‐ Select your speed position. Take out the pusher of the filling shaft and fill it. DO NOT fill the shaft

completely. Place back the pusher into the filling shaft and gently press down the food. With firmer

apple varieties a.o., you could feel a little resistance. Briefly press harder the apple until it touches the

grater. Then push gently again.

‐ The juice is running into the glass/carafe and the residue into the residue container.

IMPORTANT: Make sure the residue container is not too full. In that case, the appliance will not

work properly or can even get damaged. Always switch off the juice extractor before emptying the

residue container.

DISASSEMBLING THE JUICE EXTRACTOR

‐ Turn the speed control button on the OFF position and pull the plug out of the socket.

‐ Unlock the safety brackets

‐ Remove the residue container from under the lid.

‐ Remove the lid with fillingshaft and pusher.

‐ Remove the juice collector together with the sieve. This will enable you to remove the sieve easily

afterwards. DO NOT touch the grater inside the stainless steel sieve with your hands!

IMPORTANT: The grater in the stainless steel sieve is very sharp. NEVER touch the grater or

the cutting surface with your hands. ALWAYS take stainless steel sieve by the rim.

MAINTENANCE AND CLEANING

‐ Turn the speed control button on the OFF position and pull the plug out of the socket.

‐ Then disassemble the appliance. (see ‘disassembling the juice extractor’)

‐ NEVER clean the parts in the dish-washer, but clean them in hot soapy water.

‐ NEVER immerse the motor housing in water or any kind of fluid. The motor housing needs to be

cleaned with a damp cloth.

‐ The stainless steel sieve can be cleaned easily with a nylon washing-up brush in warm soapy water.

NEVER immerse the stainless steel sieve in a bleaching product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fritel JE 3877 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info