505138
29
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
PAG.
29
rev 1.1
5.9. OTHER
When you select “Other” you will see a screen like OSD 49:
5.9.1. LNB POWER
Here you can set the power output to the LNB. If your receiver
is connected to the LNB directly then you need to set the
LNB Power to “On”. If your receiver is connected to a multi
switch (SMATV signal distribution system) then it may be that
you don’t need to provide the power to the LNB. But since
this is depending on the kind of installed distribution system we
recommend you to contact your installer or to refer to the user
manual of this system to get the correct information.
You also just can change this setting and check if you still can
receive the channels. If the LNB Power is off and you still can
see all channels then we recommend this setting.
5.9.2. CHANNEL PLAY TYPE
In this option you will be able to choose which type of channels
the receiver shown every time it starts. Press [ ] in order
to select among All, Free or Scrambled.
5.9.3. CHANNEL CHANGE
From this option you will be able to select the effect that will
be shown in the screen every time you change the channel.
Press [ ] in order to select between “Black screen” or
“Freeze” (it will show the frozen image of the cannel you were
watching).
5.9.5. AUTO STANDBY
This option will allow you to activate or deactivate the automatic
Standby option. Options: On, Off.
-On: The receiver will be in standby mode automatically after
3 hours, as long as during this time no commands have been
sent to the receiver through the remote control or buttons of
the front panel, and no programmed timers are run.
-Off: Auto standby function gets deactivated.
Use [ ] in order to turn this option on/off.
5.9.6. CLOCK IN STANDBY
If you wish to see the current time in the display while the
receiver is in standby mode, you should confi gure this option
“On”.
SYSTEM SETUP
OSD 49
ENGLISH
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für FTE Maximal MAX S400 HD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von FTE Maximal MAX S400 HD

FTE Maximal MAX S400 HD Bedienungsanleitung - Deutsch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info