Bedienungsanleitung FTE Maximal MAX T 160 (Seite 22 von 26) (Englisch)

505122

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Pag.

When you input to “OSD Setting” menu, you will see

a screen like below (OSD 39):

1. Subtitle Display: You can press [Left/Right] key

to select “On” or “Off”. If the current channel has

subtitle information, it will be showed up while this

function is “On”. If this function is “Off”, there won’t

show up subtitle information even if the current

channel has subtitle information.

2. OSD Timeout: When you switch channels in full

screen, there will show up some information about

current channel on the lower of the screen. And

regarding to the duration of these information show up on the screen, you can press [Left/Right]

key to set the time. The range of the duration is “1 second ~ 10seconds”.

3. OSD Transparency: Besides the setting of “OSD Menu Style”, you also can set the transparency

of OSD. You can press [Left/Right] key to select the values. There are 5 levels of transparency,

10%, 20%, 30%, and 40% and “NO” (means no transparency function).

4. Load OSD Setting Default: If you are not satisfy with your setting, you can move highlight

to this item and press [OK] key to reset parameters as default value.

You can set a password for anyone who wishes to

operate in the “Installation” menu. And you can also

set the password for the lock channels. (How to set

the lock channel please refer to LOCK) Here will

show you how to setting and how to revising the

password.

1.In “Parental Lock” function, press [OK] key, there

will pop an dialogue for you to input the password.

The default password is “0000”. When you input the

correct password, you will see a screen like

below(OSD 40):

2.Menu Lock determining that when user wish to enter “Installation” menu, whether have to

input Password or not. If the setting of “Menu Lock” is “Yes” which means user have to key in

password, set “No” means unlock.

3. Channel Lock determining that when user wish to play the lock channels, whether have to

input the password or not. If the setting is “Yes”, play the channels with lock mark will show up

a dialogue on the screen and ask for the password. If the setting of “Channel Lock ”is “No”, the

Lock function will invalid.

4. New Password is used for revising password; you can input the new password in this item

by using number keys directly. After you filled in 4 digital numbers, the highlight will auto skip

to Confirm Password and ask you to input the new password again. If the password is correct,

the screen will show up a message of “Change password successfully”. After finish saving and

draw back to “System Setup” menu, the revising is complete.

5.Press [Exit] key to draw back from the “Parental Lock” menu.

OSD 39

OSD 40

MENU OPERATIONS

Pag.21

5.6 OSD SETTING

5.7 PARENTAL LOCK

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FTE Maximal MAX T 160 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von FTE Maximal MAX T 160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info