Bedienungsanleitung FTE Maximal PVR ST190 CI HDMI (Seite 37 von 41) (Englisch)

505116

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

User’s Manual · PVR ST190 CI HDMI

Reserved of technical modifications and/or errors - 37 - PVR ST190 CI HDMI Version en_1.0 FTE maximal

The options you have right with the list are the following ones:

Delete Transponder: The RED key allows you to make a multiple selection of transponders to be deleted. When you

select a TP, it will appear the icon in its column, when you exit of the menu, you will be requested to confirm the

changes.

Edit Transponder: This function with the GREEN key will allow you to vary the parameters of the transponder. You can

change the frequency, polarity, symbol rate and FEC. This last parameter can be changed to AUTO mode in case of

unknowing it.

Add Transponder: Like in the previous step, the YELLOW key, allow adding new TP to the list.

Skip Transponder: In this function, with the BLUE key, allows that one transponder will be keeped in the list but it will be

not tuned.

Whatever change made over the list of transponders will need to be confirmed with OK button when you

exit the menu.

10.4 Channel Search: Satellite

Once the antenna configuration is completed, you should proceed to tune

the channels from the selected satellites. There are different ways to tune the

channels: through LNB, through Satellites and through Transponders.

Searching channels through LNB:

When you select to search channels through LNB, you only can select one

LNB, which corresponds to the programmed tuner, so if you have more than

one LNB installed and configured, you should proceed with one and then the

other to tune all the received channels.

Searching channels through Satellite:

When you search through satellite, you will have several satellite selections,

so you can programme the searching of all the satellites that you have

configured and in one single process you will find all the channels.

To select the satellites, use the Green key, to change the sort of the satellite

list, use the LIST key, confirm your multiple selection by pressing OK key.

Searching channels through Transponder:

Searching through Transponders is the most selective of all the options. It

allows you selecting the frequencies that you are going to tune and search

channels. By default your equipment shows All the transponders and with

the key you can change this option and make a selection of the

transponders that you want to tune. The selection is made with the Green

button and it is validated the multiple selection with the OK key.

In case of adding some new transponder (see point 9.5 transponders

management) you should tune it in this mode.

In whatever selection, you always will have available to find Free To Air

(Free channels), channels with Conditional Access, or All the channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FTE Maximal PVR ST190 CI HDMI Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von FTE Maximal PVR ST190 CI HDMI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info