Bedienungsanleitung Fuji Bike (Seite 33 von 67) (Englisch)

540674

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Whether you have overlap or not, you must keep the inside pedal up and the outside pedal down when making sharp

turns.

2. Some bicycles come equipped with pedals that have sharp and potentially dangerous surfaces. These surfaces are

designed to add safety by increasing grip between the rider’s shoe and the pedal. If your bicycle has this type of

high-performance pedal, you must take extra care to avoid serious injury from the pedals’ sharp surfaces. Based on your riding

style or skill level, you may prefer a less aggressive pedal design, or chose to ride with shin pads. Your dealer can show you a

number of options and make suitable recommendations.

3. Toeclips and straps are a means to keep feet correctly positioned and engaged with the pedals. The toeclip positions the

ball of the foot over the pedal spindle, which gives maximum pedaling power. The toe strap, when tightened, keeps the foot

engaged throughout the rotation cycle of the pedal. While toeclips and straps give some benefit with any kind of shoe, they work

most effectively with cycling shoes designed for use with toeclips. Your dealer can explain how toeclips and straps work. Shoes

with deep treaded soles or welts which might make it more difficult for you to insert or remove your foot should not be used with

toeclips and straps.

WARNING: Getting into and out of pedals with toeclips and straps requires skill which can only be acquired with

practice. Until it becomes a reflex action, the technique requires concentration which can distract your attention

and cause you to lose control and fall. Practice the use of toeclips and straps where there are no obstacles, hazards or

traffic. Keep the straps loose, and don’t tighten them until your technique and confidence in getting in and out of the

pedals warrants it. Never ride in traffic with your toe straps tight.

4. Clipless pedals (sometimes called “step-in pedals”) are another means to keep feet securely in the correct position for

maximum pedaling efficiency. They have a plate, called a “cleat,” on the sole of the shoe, which clicks into a mating spring-loaded

fixture on the pedal. They only engage or disengage with a very specific motion which must be practiced until it becomes

instinctive. Cliplesspedals require shoes and cleats which are compatible with the make and model pedal being used.

Many clipless pedals are designed to allow the rider to adjust the amount of force needed to engage or disengage the foot.

Follow the pedal manufacturer’s instructions, or ask your dealer to show you how to make this adjustment. Use the easiest

setting until engaging and disengaging becomes a reflex action, but always make sure that there is sufficient tension to prevent

unintended release of your foot from the pedal.

WARNING: Clipless pedals are intended for use with shoes specifically made to fit them and are designed to

firmly keep the foot engaged with the pedal. Do not use shoes which do not engage the pedals correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fuji Bike Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info