Bedienungsanleitung Fuji Finepix A345 (Seite 6 von 49) (Englisch)

472679

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

10 11

Getting Ready

LOADING THE BATTERIES AND THE MEDIA

1 Getting Ready

Compatible batteries

h AA-size alkaline batteries (2) or AA-size Ni-MH rechargeable batteries (sold separately) (2)

●

Use the same brand and grade AA-size alkaline batteries as those supplied with the camera.

◆

How to use the batteries

◆

h Never use the following types of batteries as they could cause serious

problems such as battery fluid leakage or overheating:

1. Batteries with split or peeling outer casings

2. Combinations of different types of batteries or new and used batteries

together

h Do not use manganese or Ni-Cd batteries.

h Soil, such as fingermarks on the poles of the batteries can shorten time for which the batteries can be

used.

h The time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries) can

be used varies depending on the brand. Some brands of alkaline batteries may stop providing power

more quickly than those supplied with the camera. Note also that due to their nature, the time for

which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to +50°F).

The use of AA-size Ni-MH batteries is better for this reason.

h Use Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.

h See P.78-79 for other notes on using batteries.

h When first purchased or if left unused for a long period, the amount of time which AA-size Ni-

MH batteries can be used may be short. See P.79 for more information.

Outer casing

Load the batteries correctly as indicated by the

polarity icons.

Check that the camera is turned off (viewfinder

lamp is off) before opening the battery cover.

●

If opening the battery cover while the camera is still on, the

camera will turn off.

●

Do not apply force to the battery cover.

Do not open the battery cover while the camera is

on. This could damage the xD-Picture Card or ruin

the image files on the xD-Picture Card.

Gold

marking

Align the gold marking on the xD-Picture Card slot

with the gold contact area on the xD-Picture Card

and push the card firmly all the way into the slot.

●

If the xD-Picture Card is oriented incorrectly, it will not go all

the way into the slot. Do not apply force when inserting an

xD-Picture Card.

●

Depending on the camera mode and the type of batteries used, the transition from “C” to “V” may occur more

quickly.

●

Due to the nature of the battery, the battery level warning may appear early when the camera is used in cold

locations. This is normal. Try warming the batteries in your pocket or a similar location before use.

✽ Battery level warning

1) The camera’s estimation of the remaining battery charge varies greatly depending on the camera operation mode.

Consequently, even if “

C” or “V” is not displayed in Playback mode, one of them may appear when you change

to Photography mode.

2) Depending on the battery type and the level of charge in the batteries, the camera may run out of power without first

displaying a battery level warning. This is particularly likely to happen when batteries that have run out of charge

once are re-used.

In situation 2), immediately load new or fully charged replacement batteries.

Turn the camera on and check the battery charge.

Close the battery cover.

◆

How to replace the xD-Picture Card

◆

Push the xD-Picture Card into the slot and then

slowly remove your finger. The lock is released and

the xD-Picture Card is pushed out.

Checking the battery charge

“C” appears as a small icon on the right-hand

side of the LCD monitor. “V” appears as a large

icon in the center of the LCD monitor.

Lit red

Blinking red

121 2N

1There is ample battery charge.

2There is insufficient charge left in the batteries.

The batteries will soon run out. Have a new set

of batteries ready.

3The batteries are depleted. The display will

shortly go blank and the camera will stop

working. Replace or recharge the batteries.

Blinking red

Lit red

No icon

◆

Power save function

◆

When the camera is not used for 60 seconds, this function turns off the LCD monitor (sleep mode) to

reduce power consumption (➡P.54). If the camera is then left unused for 2 or 5 minutes, the Power

save function turns the camera off. To turn the camera back on, press the “POWER” button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fuji Finepix A345 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info