469003
40
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
DIGITAL CAMERA
FINEPIX JX280 Series
FINEPIX JX180 Series
For information on related products, visit our
website at
http://www.fujifilm.com/products/digital_cameras/index.html
Owners Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM FinePix JX280 Series,
FinePix JX180 Series digital camera
and the supplied software. Be
sure that you have read and
understood its contents before
using the camera.
BL01066-200
EN
ii
Notes and Cautions
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions: All the safety
and operating instructions should
be read before the appliance is
operated.
Retain Instructions: The safety and
operating instructions should be
retained for future reference.
Heed Warnings: All warnings on the
appliance and in the operating
instructions should be adhered to.
Follow Instructions: All operating
and use instructions should be
followed.
Installation
Installation
Power Sources: This video product
should be operated only from the
type of power source indicated on
the marking label. If you are not sure
of the type of power supply to your
home, consult your appliance dealer
or local power company. For video
products intended to operate from
battery power, or other sources,
refer to the operating instructions.
Grounding or Polarization: This
video product is equipped with a
polarized alternating-current line
plug (a plug having one blade
wider than the other). This plug will
fit into the power outlet only one
way. This is a safety feature. If you
are unable to insert the plug fully
into the outlet, try reversing the
plug. If the plug should still fail to fit,
contact your electrician to replace
your obsolete outlet. Do not defeat
the safety purpose of the polarized
plug.
Alternate Warnings: This video
product is equipped with a 3-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug
will only fit into a grounding-type
power outlet. This is a safety feature.
If you are unable to insert the
plug into the outlet, contact your
electrician to replace your obsolete
outlet. Do not defeat the safety
purpose of the grounding-type
plug.
Overloading: Do not overload wall
outlets and extension cords as this
can result in a risk of fire or electric
shock.
Ventilation: Slots and openings
in the cabinet are provided for
ventilation and to ensure reliable
operation of the video product
and to protect it from overheating,
and these openings must not be
blocked or covered.
The openings should never be
blocked by placing the video
product on a bed, sofa, rug, or other
similar surface.
This video product should not
be placed in a built-in installation
such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have
been adhered to.
This video product should never
be placed near or over a radiator or
heat register.
Attachments: Do not use
attachments not recommended by
the video product manufacturer as
they may cause hazards.
Water and Moisture: Do not use this
video product near water – for
example, near a bath tub, wash
bowl, kitchen sink, or laundry
tub, in a wet basement, or near a
swimming pool, and the like.
Power-Cord Protection: Power-Supply
cords should be routed so that
they are not likely to be walked
on or pinched by items placed
upon or against them, paying
particular attention to cords at
plugs, convenience receptacles, and
the point where they exit from the
appliance.
Accessories: Do not place this video
product on an unstable cart, stand,
tripod, bracket, or table. The video
product may fall, causing serious
injury to a child or adult, and
serious damage to the appliance.
Use only with a cart, stand, tripod,
bracket, or table recommended
by the manufacturer, or sold with
the video product. Any mounting
of the appliance should follow the
manufacturer’s instructions, and
should use a mounting accessory
recommended by the manufacturer.
An appliance and
cart combination
should be moved
with care. Quick
stops, excessive
force, and uneven
surfaces may
cause the appliance and cart
combination to overturn.
Antennas
Antennas
Outdoor Antenna Grounding:
If an
outside antenna or cable system is
connected to the video product, be
sure the antenna or cable system
is grounded so as to provide some
protection against voltage surges and
built-up static charges. Section 810
of the National Electrical Code, ANSI/
NFPA No. 70, provides information
with respect to proper grounding of
the mast and supporting structure,
grounding of the lead-in wire to
an antennadischarge unit, size of
grounding conductors, location of
antenna-discharge unit, connection
to grounding electrodes, and
requirements for the grounding
electrode.
iii
Notes and Cautions
Power Lines: An outside antenna
system should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or
circuits as contact with them might
be fatal.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground
Clamp
Power Service Grounding
Electrode System
(NEC ART 250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Grounding
Conductors
(NEC SECTION
810-21)
Electric
Service
Equipment
Ground
Clamps
Use
Use
Cleaning: Unplug this video product
from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
Object and Liquid Entry: Never push
objects of any kind into this video
product through openings as they
may touch dangerous voltage
points or shortout parts that could
result in a fire or electric shock.
Never spill liquid of any kind on the
video product.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long
periods of time, unplug it from
the wall outlet and disconnect
the antenna or cable system. This
will prevent damage to the video
product due to lightning and
power-line surges.
Service
Service
Servicing: Do not attempt to service
this video product yourself as
opening or removing covers may
expose you to dangerous voltage or
other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service: Unplug this
video product from the wall outlet
and refer servicing to qualified
service personnel under the
following conditions:
When the power-supply cord or
plug is damaged.
If liquid has been spilled, or objects
have fallen into the video product.
If the video product has been
exposed to rain or water.
If the video product has been
dropped or the cabinet has been
damaged.
If the video product does not
operate normally be following the
operating instructions. Adjust only
those controls that are covered
by the operating instructions as
an improper adjustment of other
controls may result in damage and
will often require extensive work
by a qualified technician to restore
the video product to its normal
operation.
When the video product exhibits
a distinct change in performance
- this indicates a need for service.
Replacement Parts: When
replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock or other
hazards.
Safety Check: Upon completion of
any service or repairs to this video
product, ask the service technician
to perform safety checks to
determine that the video product is
in proper operating condition.
iv
Notes and Cautions
Be sure to read this notes before using
Safety Notes
Make sure that you use your camera correctly. Read these Safety Notes
and your Owner’s Manual carefully before use.
After reading these Safety Notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly as a
result.
WARNING
This icon indicates that death or serious injury can result if the information
is ignored.
CAUTION
This icon indicates that personal injury or material damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of the information
which is to be observed.
Triangular icons tell you that this information requires attention (“important”).
Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an action that must be
performed (“Required”).
WARNING
WARNING
Unplug
from power
socket.
If a problem arises, turn the camera off, remove the battery, disconnect and unplug
the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting any
unusual odor, or is in any other abnormal state can cause a fire or electric
shock.
Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn the camera off, remove
the battery and disconnect and unplug the AC power adapter.
Continued use of the camera can cause a fire or electric shock.
Contact your FUJIFILM dealer.
Do not use in
the bathroom
or shower.
Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
Do not
disassemble.
Never attempt to disassemble or modify (never open the case).
Failure to observe this precaution can cause fire or electric shock.
Do not touch
internal
parts.
Should the case break open as the result of a fall or other accident, do not touch the
exposed parts.
Failure to observe this precaution could result in electric shock or in injury
from touching the damaged parts. Remove the battery immediately, taking
care to avoid injury or electric shock, and take the product to the point of
purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy
objects on the connection cord.
These actions could damage the cord and cause a fire or electric shock.
If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or driving a vehicle. This can
result in you falling down or being involved in a traffic accident.
v
Notes and Cautions
WARNING
WARNING
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from the lightning
discharge.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.
Do not heat, change or take apart the battery. Do not drop or subject the battery to
impacts. Do not store the battery with metallic products. Do not use chargers other
than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause fire or
injury as a result.
Use only the battery or AC power adapters specified for use with this camera. Do not
use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing. Flush
the affected area with clean water and seek medical attention or call an emergency
number right away.
Do not use the charger to charge batteries other than those specified here.
The Ni-MH battery charger is designed for Fujifilm HR-AA Ni-MH batteries.
Using the charger to charge conventional batteries or other types of
rechargeable batteries can cause the battery to leak fluid, overheat or burst.
When carrying the battery, install it in a digital camera or keep it in the hard case.
When storing the battery, keep it in the hard case. When discarding, cover the battery
terminals with insulation tape.
Contact with other metallic objects or battery could cause the battery to
ignite or burst.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children. Be sure
to store Memory Cards out of the reach of small children. If a child swallows a
Memory Card, seek medical attention or call an emergency number.
CAUTION
CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust.
This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures.
Do not leave the camera in locations such as a sealed vehicle or in direct
sunlight. This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the hands of a child.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not pull on
the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the camera for an extended
period, remove the battery and disconnect and unplug the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young children.
When a Memory Card is removed, the card could come out of the slot too quickly. Use
your finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
Contact your FUJIFILM dealer to request internal cleaning every 2 years.
Please note this is not a free of charge service.
vi
Notes and Cautions
Power Supply and Battery
* Confirm your battery type before reading
the following descriptions.
The following explains proper use
of batteries and how to prolong
their life. Incorrect use of batteries
can cause shorter battery life, as
well as leakage, excessive heat, fire
or explosion.
1
Camera uses the Rechargeable
Lithium-ion Battery
* When shipped, the battery is not
fully charged. Always charge the
battery before using it.
* When carrying the battery, install
it in a digital camera or keep it in
the soft case.
Battery Features
The battery gradually loses its
charge even when not used. Use
a battery that has been charged
recently (in the last day or two) to
take pictures.
To maximize the life of the battery,
turn the camera off as quickly as
possible when it is not being used.
The number of available frames
will be lower in cold locations or
at low temperatures. Take along
a spare fully charged battery. You
can also increase the amount of
power produced by putting the
battery in your pocket or another
warm place to heat it and then
loading it into the camera just
before you take a picture.
If you are using a heating pad,
take care not to place the battery
directly against the pad. The
camera may not operate if you
use a depleted battery in cold
conditions.
Charging the Battery
You can charge the battery using
the battery charger (included).
The battery can be charged at
ambient temperatures between
C and +40°C (+3F and
+104°F). Refer to the OWNER’S
MANUAL for the time of charging
battery.
You should charge the battery
at an ambient temperature
between +1C and +35°C
(+50°F and +95°F). If you charge
the battery at a temperature
outside this range, charging
takes longer because the
performance of the battery is
impaired.
You cannot charge the battery
at temperatures of 0°C (+32°F) or
below.
The Rechargeable Lithium-ion
Battery does not need to be fully
discharged or exhausted flat
before being charged.
The battery may feel warm after it
has been charged or immediately
after being used. This is perfectly
normal.
Do not recharge a fully charged
battery.
Battery Life
At normal temperatures, the battery
can be used at least 300 times.
If the time for which the battery
provides power shortens markedly,
this indicates that the battery has
reached the end of its effective life
and should be replaced.
Notes on storage
If a battery is stored for long
periods while charged, the
performance of the battery can
be impaired. If the battery will not
be used for some time, run the
battery out before storing it.
If you do not intend to use the
camera for a long period of time,
remove the battery from the
camera.
Store the battery in a cool place.
The battery should be stored in
a dry location with an ambient
temperature between +15°C and
+25°C (+5F and +77°F).
Do not leave the battery in hot
or extremely cold places.
Handling the Battery
Cautions for Your Safety:
Do not carry or store battery with
metal objects such as necklaces or
hairpins.
Do not heat the battery or throw it
into a fire.
Do not attempt to take apart or
change the battery.
Do not recharge the battery with
chargers other those specified.
Dispose of used battery promptly.
Do not drop the battery or
otherwise subject it to strong
impacts.
Do not expose the battery to
water.
Always keep the battery terminals
clean.
Do not store batteries in hot
places. Also, if you use the battery
for a long period, the camera body
and the battery itself will become
warm. This is normal. Use the AC
power adapter if you are taking
pictures or viewing images for a
long period of time.
2
Camera uses AA-size alkaline
or Ni-MH (nickelmetal hydride)
rechargeable batteries
* For details on the batteries that
you can use, refer to the OWNER’S
MANUAL of your camera.
Cautions for Using Battey
Do not heat the batteries or throw
them into a fire.
Do not carry or store batteries
with metal objects such as
necklaces or hairpins.
Do not expose the batteries to
water, and keep batteries from
getting wet or stored in moist
locations.
Do not attempt to take apart or
change the batteries, including
battery casings.
Do not subject the batteries to
strong impacts.
vii
Notes and Cautions
Do not use batteries that are
leaking, deformed, discolored.
Do not store batteries in warm or
humid places.
Keep the batteries out of reach of
babies and small children.
Make sure that the battery polarity
(E and F) is correct.
Do not use new with used
batteries. Do not use charged and
discharged batteries together.
Do not use different types or
brands of batteries at the same
time.
If you do not intend to use the
camera for a long period of time,
remove the batteries from the
camera. Note if the camera is left
with the batteries removed, the
time and date settings are cleared.
The batteries feel warm right after
being used. Before removing the
batteries, turn the camera off
and wait for the batteries to cool
down.
Since batteries do not work well in
cold weather or locations, warm
the batteries by placing them
inside your garments before use.
Batteries do not work well when
cold. They will work again when
the temperature returns to normal.
Soil (such as fingerprints) on
the battery terminals makes the
batteries charge less reducing the
number of images. Carefully wipe
the battery terminals with a soft
dry cloth before loading.
If any liquid at all leaks from
the batteries, wipe the battery
compartment thoroughly and
then load new batteries.
If any battery fluid comes
into contact with your hands
or clothing, flush the area
thoroughly with water. Note
that battery fluid can cause
loss of eyesight if it gets into
your eyes. If this occurs, do
not rub your eyes. Flush the
fluid out with clean water and
contact your physician for
treatment.
Using the AA-size Ni-MH batteries
correctly
Ni-MH batteries left unused in
storage for long periods can
become “deactivated”. Also,
repeatedly charging Ni-MH
batteries that are only partially
discharged can cause them
to suffer from the “memory
effect”. Ni-MH batteries that
aredeactivated” or affected by
“memory” suffer from the problem
of only providing power for a
short time after being charged. To
prevent this problem, discharge
and recharge them several times
using the camera’s “Discharging
rechargeable batteries” function.
Deactivation and memory are
specific to Ni-MH batteries and are
not in fact battery faults.
See OWNER’S MANUAL for the
procedure for “Discharging
rechargeable batteries.
CAUTION
CAUTION
Do not use the “Discharging
rechargeable batteries” function
when alkaline batteries being used.
To charge Ni-MH batteries,
use the quick battery charger
(sold separately). Refer to the
instructions supplied with the
charger to make sure that the
charger is used correctly.
Do not use the battery charger to
charge other batteries.
Note that the batteries feel warm
after being charged.
Due to the way the camera is
constructed, a small amount of
current is used even when the
camera is turned off. Note in
particular that leaving Ni-MH
batteries in the camera for a long
period will overdischarge the
batteries and may render them
unusable even after recharging.
Ni-MH batteries will self-discharge
even when not used, and the time
for which they can be used may
be shortened as a result.
Ni-MH batteries will deteriorate
rapidly if overdischarged (e.g.
by discharging the batteries in a
flashlight). Use the “Discharging
rechargeable batteries” function
provided in the camera to
discharge the batteries.
Ni-MH batteries have a limited
service life. If a battery can only be
used for a short time even after
repeated discharge-charge cycles,
it may have reached the end of its
service life.
Disposing of Batteries
When disposing of batteries, do
so in accordance with your local
waste disposal regulations.
3
Notes on both models (
1
,
2
)
AC Power Adapter
Always use the AC Power Adapter
with the camera. The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damaged
to your digital camera.
For details on the AC power adapter,
refer to the OWNER’S MANUAL of
your camera.
Use the AC power adapter for
indoor use only.
Plug the connection cord plug
securely into the DC input
terminal.
Turn off the FUJIFILM Digital
camera before disconnecting the
cord from the DC input terminal.
To disconnect, pull out the plug
gently. Do not pull on the cord.
Do not use the AC power adapter
with any device other than your
camera.
During use, the AC power adapter
will become hot to the touch. This
is normal.
viii
Notes and Cautions
Do not take apart the AC power
adapter. Doing so could be
dangerous.
Do not use the AC power adapter
in a hot and humid place.
Do not subject the AC power
adapter to strong shocks.
The AC power adapter may emit a
humming. This is normal.
If used near a radio, the AC power
adapter may cause static. If this
happens, move the camera away
from the radio.
Before Using the Camera
Do not aim the camera at extremely
bright light sources, such as the sun
in a cloudless sky. Failure to observe
this precaution could damage the
camera image sensor.
Test Shots Prior to Photography
For important photographs (such
as weddings and overseas trips),
always take a test shot and view the
image to make sure that the camera
is working normally.
FUJIFILM Corporation cannot
accept liability for any incidental
losses (such as the costs of
photography or the loss of income
from photography) incurred as a
result of faults with this product.
Notes on Copyright
Images recorded using your digital
camera system cannot be used in
ways that infringe copyright laws
without the consent of the owner,
unless intended only for personal
use. Note that some restrictions
apply to the photographing of
stage performances, entertainments
and exhibits, even when intended
purely for personal use. Users are
also asked to note that the transfer
of Memory Card containing images
or data protected under copyright
laws is only permissible within
the restrictions imposed by those
copyright laws.
Handling Your Digital Camera
To ensure that images are recorded
correctly, do not subject the camera
to impact or shock while an image is
being recorded.
Liquid Crystal
If the LCD monitor is damaged,
take particular care with the liquid
crystal in the monitor. If any of the
following situations arise, take the
urgent action indicated.
If liquid crystal comes in contact
with your skin:
Wipe the area with a cloth and
then wash thoroughly with soap
and running water.
If liquid crystal gets into your eye:
Flush the affected eye with clean
water for at least 15 minutes and
then seek medical assistance.
If liquid crystal is swallowed:
Flush your mouth thoroughly with
water. Drink large quantities of
water and induce vomiting. Then
seek medical assistance.
Trademark Information
and xD-Picture Card™
are trademarks of FUJIFILM
Corporation.
IBM PC/AT is a registered
trademark of International
Business Machines Corp. of the
U.S.A.
Macintosh, Quick-Time, and Mac
OS are trademarks of Apple Inc. in
the U.S.A. and other countries.
Windows 7, Windows Vista and the
Windows logo are trademarks of
the Microsoft group of companies.
IrSimple™ Trademark is owned by
the Infrared Data Association®.
IrSS™ Trademark or IrSimpleShot™
Trademark is owned by the
Infrared Data Association®.
SDHC logo is a trademark.
HDMI logo is a trademark.
YouTube is a trademark of Google
Inc.
Other company or product names
are trademarks or registered
trademarks of the respective
companies.
Notes on Electrical Interference
If the camera is to be used in
hospitals or aircrafts, please
note that this camera may cause
interference to other equipment in
the hospital or aircraft. For details,
please check with the applicable
regulations.
Explanation of Color Television
System
NTSC: National Television System
Committee, color television
telecasting specifications
adopted mainly in the U.S.A.,
Canada and Japan.
PAL: Phase Alternation by Line,
a color television system
adopted mainly by European
countries and China.
Exif Print (Exif ver. 2.3)
Exif Print Format is a newly revised
digital camera file format that
contains a variety of shooting
information for optimal printing.
IMPORTANT NOTICE: Read Before
Using the Software
Direct or indirect export, in whole or
in part, of licensed software without
the permission of the applicable
governing bodies is prohibited.
ix
About This Manual
Before using the camera, read this Owners Manual and the other supplied documents. For
information on specific topics, consult the sources below.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 8.
Troubleshooting
Troubleshooting
..............................................
..............................................
pg. 84
pg. 84
Having a specific problem with the camera?
Find the answer here.
Glossary
Glossary
..........................................................
..........................................................
pg. 95
pg. 95
The meanings of some technical terms may be
found here.
Table of Contents
Table of Contents
............................................
............................................
pg. xiii
pg. xiii
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
Warning Messages and Displays
Warning Messages and Displays
.......................
.......................
pg. 91
pg. 91
Find out what’s behind that flashing icon or
error message in the monitor.
Camera Q & A
Camera Q & A
.....................................................
.....................................................
pg. x
pg. x
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”
Restrictions on Camera Settings
Restrictions on Camera Settings
See another supplied document for restrictions
on the options available in each shooting mode.
x
Camera Q & A
Find items by task.
Camera Setup
Camera Setup
Question
Question
Key phrase
Key phrase
See page
See page
How do I set the camera clock? Date and time 12
Can I set the clock to local time when I travel? Time difference 76
How do I keep the display from turning off automatically? Auto power off 79
How do I make the display brighter or darker? LCD brightness 79
How do I stop the camera beeping and clicking?
Operation and shutter volume 74
Silent mode 33
Can I change the sound the shutter makes? Shutter sound 74
What do the icons in the display mean? Displays 3
How much charge is left in the battery? Battery level 13
Sharing Pictures
Sharing Pictures
Question
Question
Key phrase
Key phrase
See page
See page
Can I print pictures on my home printer? Printing pictures 49
xi
Camera Q & A
Taking Pictures
Taking Pictures
Question
Question
Key phrase
Key phrase
See page
See page
How can I make good portraits? Intelligent Face Detection 24
Can I choose my own settings for different scenes? Scene position 20
Can the camera automatically adjust settings for different scenes?
SRC (SCENE RECOGNITION)
13
How can I be sure my subject is smiling when I take a photograph? Smile detection 21
How can I be sure that nobody blinked when the photo was taken? Blink detection 26
How do I shoot a panorama?
N mode
21
How do I shoot close-ups? Close-ups (macro mode) 31
How do I keep the flash from firing?
Flash mode 32How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a series of pictures in a single burst? Continuous shooting mode 64
How do I take a group portrait that includes the photographer? Self-timer mode 34
How do I adjust exposure? Exposure compensation 29
How do I keep a moving subject in focus? Tracking 64
How do I shoot movies? Recording movies 45
xii
Camera Q & A
Viewing Pictures
Viewing Pictures
Question
Question
Key phrase
Key phrase
See page
See page
How do I view my pictures? Single-frame playback 36
How do I delete the current picture? The I button 18
Can I select other pictures for deletion? Deleting pictures 43
Can I zoom in on pictures during playback? Playback zoom 37
How do I view a lot of pictures at once? Multi-frame playback 38
How do I find pictures? Image search 41
Can I protect my pictures from accidental deletion? Protect 67
Can I hide the icons in the display when viewing my pictures? Choosing a display format 36
How do I make photobooks of my favorite pictures? Photobook assist 39
Can I mark images with favorite (I) rating? I Favorites
37
xiii
Notes and Cautions ........................................................................ ii
IMPORTANT SAFETY INSTRUCTIONS ...................................... ii
About This Manual ......................................................................... ix
Camera Q & A ..................................................................................... x
Before You Begi
Before You Begi
n
n
Introduction .......................................................................................1
Symbols and Conventions ..........................................................1
Supplied Accessories ....................................................................1
Parts of the Camera .......................................................................2
Camera Displays .......................................................................... 3
The Mode Dial ..............................................................................4
First Step
First Step
s
s
Charging the Battery ..................................................................... 5
Inserting the Battery...................................................................... 6
Inserting a Memory Card ............................................................. 8
Turning the Camera on and off ............................................... 11
Shooting Mode .............................................................................11
Playback Mode ..............................................................................11
Basic Setup .......................................................................................12
Basic Photography and Playbac
Basic Photography and Playbac
k
k
Taking Pictures in SRC (SCENE RECOGNITION)
Mode ...................................................................................................13
Viewing Pictures ............................................................................18
More on Photograph
More on Photograph
y
y
Shooting Mode ............................................................................... 19
SRC SCENE RECOGNITION...............................................19
k AUTO ..........................................................................................19
P PROGRAM AE .............................................................................19
A NATURAL & K .......................................................................19
B NATURAL LIGHT ...................................................................19
D/E SCENE POSITION ...........................................................20
B Intelligent Face Detection .................................................. 24
BLINK DETECTION ........................................................................26
Focus Lock ........................................................................................27
5 Exposure Compensation ..................................................... 29
L Macro Mode (Close-ups) ......................................................31
K Using the Flash (Intelligent Flash) .....................................32
J Using the Self-Timer ...............................................................34
More on Playbac
More on Playbac
k
k
Playback Options ...........................................................................36
Favorites: Rating Picture ............................................................37
Playback Zoom ..............................................................................37
Multi-Frame Playback .................................................................38
k PhotoBook Assist ....................................................................39
Creating a PhotoBook ................................................................39
Viewing PhotoBooks ..................................................................40
Editing and Deleting PhotoBooks .........................................40
V Image Search ............................................................................ 41
Image Search based on categories .......................................41
Using Playback Menu with Image Search...........................42
M Deleting Pictures .................................................................... 43
Table of Contents
xiv
Table of Contents
Movie
Movie
s
s
A Recording Movies ...................................................................45
D Viewing Movies .......................................................................47
Connection
Connection
s
s
Viewing Pictures on TV ...............................................................48
Printing Pictures via USB ...........................................................49
Connecting the Camera ............................................................49
Printing Selected Pictures ........................................................49
Printing the DPOF Print Order ................................................51
Creating a DPOF Print Order ....................................................52
Viewing Pictures on a Computer ............................................54
Installing the Software...............................................................54
Connecting the Camera ............................................................58
Menu
Menu
s
s
Using the Menus: Shooting Mode .........................................60
Using the Shooting Menu .........................................................60
Shooting Menu Options ............................................................61
n ISO ............................................................................................62
o IMAGE SIZE ...........................................................................62
T IMAGE QUALITY ..................................................................63
W FINEPIX COLOR ....................................................................63
C WHITE BALANCE .................................................................63
E CONTINUOUS ......................................................................64
F AF MODE ...............................................................................64
Using the Menus: Playback Mode .......................................... 65
Using the Playback Menu .........................................................65
Playback Menu Options .............................................................66
q SLIDE SHOW .........................................................................66
a RED EYE REMOVAL .............................................................67
O PROTECT ................................................................................67
R CROP .......................................................................................68
j RESIZE .....................................................................................69
N IMAGE ROTATE ....................................................................70
P COPY .......................................................................................71
The Setup Menu .............................................................................73
Using the Setup Menu ...............................................................73
Setup Menu Options ...................................................................74
p TIME DIFFERENCE ...............................................................76
m FORMAT .................................................................................77
a IMAGE DISP. ..........................................................................77
b FRAME NO. ...........................................................................78
g PLAYBACK VOLUME ...........................................................78
g LCD BRIGHTNESS................................................................79
d LCD MODE ............................................................................79
o AUTO POWER OFF ..............................................................79
c DIGITAL ZOOM ....................................................................80
Technical Note
Technical Note
s
s
Optional Accessories ...................................................................81
Accessories from FUJIFILM .......................................................82
Caring for the Camera .................................................................83
Troubleshootin
Troubleshootin
g
g
Troubleshooting ............................................................................84
Warning Messages and Displays ............................................ 91
Appendi
Appendi
x
x
Glossary .............................................................................................95
Internal Memory and Memory Card Capacity/
Recording Time ..............................................................................96
Specifications .................................................................................. 97
1
Before You Begin
Introduction
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
C Caution: This information should be read before use to ensure correct operation.
A Note: Points to note when using the camera.
B Tip: Additional information that may be helpful when using the camera.
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
CD-ROM
NP-45A rechargeable
battery
BC-45B battery charger USB cable
Attaching the Strap
Attach the strap as shown.
Owner’s Manual (may be
distributed on CD in some
countries or regions)
Strap
2
Introduction
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor right H
K (flash) button
(pg. 32)
MENU/OK button
(pg. 12)
Move cursor left G
L (macro)
button (pg. 31)
Move cursor up E
l
(exposure compensation)
button (pg. 29)
I (delete) button (pg. 18)
Move cursor down F
J (self-timer) button (pg. 34)
14
13
18
20
19
15
16
17
9
10
11
12
1
8
23
4
5
6
7
15 Indicator lamp ............................................17
16 D (playback) button ............................36
17 DISP (display)/BACK button ..........16, 36
U (silent mode) button ......................33
18 Memory card slot ....................................... 9
19 Battery chamber .........................................6
20 Battery latch .............................................6, 7
8 Flash ..................................................................32
9 Monitor ............................................................. 3
10 Tripod mount
11 Connector for USB cable .............49, 58
12 Battery-chamber cover .......................... 6
13 Strap eyelet .................................................... 1
14 Mode dial ........................................................ 4
1 n b
utton .........................................11
2 Shutter button ...........................................17
3 Speaker ...........................................................47
4 Zoom control ...................................... 15, 37
5 Self-timer lamp ..........................................35
6 Lens and lens cover
7 Microphone .................................................45
Monitor Brightness
When shooting pictures or movies, monitor brightness will be adjusted automatically according to the
ambient brightness.
3
Before You Begin
Introduction
Camera Displays
Camera Displays
The following indicators may appear during shooting and playback: The indicators displayed vary
with camera settings.
Shooting
Shooting
400
12 /31 /2050
-
1
2
3
250
F
3.3
19
F
AF
10:00
AM
*
* d: indicates that no memory card
is inserted and that pictures will
be stored in the camera’s internal
memory (pg. 8).
12 Date and time.............................................12
13 Shutter speed
14 Aperture
15 Image size .....................................................62
16 Number of available frames ..............96
17 Sensitivity ......................................................62
18 Image quality ..............................................63
19 FINEPIX color ...............................................63
20 White balance ............................................63
21 Battery level .................................................13
22 Exposure compensation .....................29
1 Internal memory indicator*
2 Focus frame .................................................27
3 Silent mode indicator ............................33
4 Continuous shooting mode ............ 64
5 Intelligent Face Detection indicator
.............................................................................24
6 Shooting mode .........................................19
7 Flash mode...................................................32
8 Macro (close-up) mode........................31
9 Self-timer indicator .................................34
10 Focus warning ...........................................16
11 Blur warning ................................................33
Playback
Playback
2
2
3
3
-
1
-
1
400
12 / 31 / 2050 10 : 00
AM
100-0001
1/250
F
3.3
F
6 Playback mode indicator ............18, 36
7 Protected image .......................................67
8 DPOF print indicator ..............................50
9 PhotoBook Assist......................................39
10 Frame number ...........................................78
1 Gift image .....................................................36
2 Silent mode indicator ............................33
3 I Favorite Rating ....................................37
4 Red-eye removal indicator ................67
5 Intelligent Face Detection indicator
..................................................................... 24, 37
4
Introduction
The Mode Dial
The Mode Dial
To select a shooting mode, align the mode icon with the mark next
to the mode dial.
k (AUTO): A simple “point-and-shoot
mode recommended for first-time users
of digital cameras (pg. 19).
B (NATURAL LIGHT): Capture natural light
indoors, under low light, or where the
flash can not be used (pg. 19).
P (PROGRAM AE): Select for control of
camera settings such as exposure
compensation, white balance, and ISO
sensitivity. The mode automatically sets
both shutter speed and lens aperture
(pg. 19).
SRC (SCENE RECOGNITION): Select for
letting the camera automatically adjust
settings to suit the scene (pg. 13).
D/E (SCENE POSITION): Choose a
scene suited to the subject or shooting
conditions and let the camera do the rest
(pg. 20).
A (MOVIE): Record movies with sound
(pg. 45).
A (NATURAL & K): Helps ensure good results
in situations with difficult lighting. Each time
the shutter button is pressed, the camera
takes two shots: one shot without the flash to
preserve natural lighting, followed immediately
by a second shot with the flash (pg. 19).
First Steps
5
Charging the Battery
The battery is not charged at shipment. Charge
the battery before use.
Batteries
The camera uses an NP-45A rechargeable battery.
1
Place the battery in the charger.
Insert the battery into the supplied battery
charger as shown, making sure that the
battery is in the orientation indicated by the
E
B
F labels.
Battery charger
Battery
Arrow
E
B
F
label
E
B
F label
2
Plug the charger in.
Plug the charger into a power outlet. The
charging indicator will light.
C Cautions
Unplug the charger when it is not in use.
Remove dirt from the battery terminals with
a clean, dry cloth. Failure to observe this
precaution could prevent the battery from
charging.
Charging times increase at low temperatures.
The Charging Indicator
The charging indicator shows battery charge status
as follows:
Charging indicator
Charging indicator
Battery status
Battery status
Action
Action
Off
Battery not
inserted.
Insert
the battery.
On (yellow)
Battery charging.
On (green)
Battery fully
charged.
Remove
the battery.
Blinks (yellow) Battery fault.
Unplug the
charger and
remove the
battery.
3
Charge the battery.
Remove the battery when charging is
complete.
Charging time
See specifications of the battery charger (pg. 100).
6
Inserting the Battery
After charging the battery, insert it in the camera as described below.
1
Open the battery-chamber cover.
A Note
Be sure the camera is off before opening the
battery-chamber cover.
C Cautions
Do not open the battery-chamber cover
when the camera is on. Failure to observe this
precaution could result in damage to image
files or memory cards.
Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Insert the battery with
the terminals first and the
orange stripe aligned with
the orange battery latch.
Slide the battery into
the camera, keeping the
battery latch pressed to
one side as shown below.
Confirm that the battery is
securely latched.
Battery latch
Orange stripe
First Steps
7
Inserting the Battery
C Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery
upside down or backwards. The battery will
slide in easily in the correct orientation.
3
Close the battery-chamber cover.
Removing the Battery
After turning the camera off, open the battery-
chamber cover, press the battery latch to the side,
and slide the battery out of the camera as shown.
Battery latch
C Caution
Turn the camera off before removing the battery.
C Cautions
Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it
impossible to remove the battery from the camera.
Do not short the battery terminals. The battery
could overheat.
Use only battery chargers designated for use with
the battery. Failure to observe this precaution could
result in product malfunction.
Do not remove the labels from the battery or
attempt to split or peel the outer casing.
The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
8
Inserting a Memory Card
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can
be used to store additional pictures.
When no memory card is inserted, d appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become
corrupted, the pictures in internal memory should periodically be transferred to a computer and
saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in
internal memory can also be copied to a memory card (see page 71). To prevent internal memory
from becoming full, be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
Compatible Memory Cards
Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. Use
a card with a class 4 write speed (4 MB/s) or better when shooting HD movies. A complete list of
approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html.
Operation is not guaranteed with other cards. The camera can not be used with MultiMediaCard
(MMC) or xD-Picture Cards.
C Caution
SD memory cards can be locked, making it impossible to format the card or to record
or delete images. Before inserting an SD memory card, slide the write-protect switch to
the unlocked position.
Write-protect switch
Write-protect switch
First Steps
9
Inserting a Memory Card
1
Turn the camera off, and open the
battery-chamber cover.
2
Insert the memory card firmly until you
hear (feel) a click.
Holding the memory card in the orientation
shown below, slide it all the way in.
Click
Battery
C Caution
Be sure card is in correct orientation; do not
insert at an angle or use force. If the memory
card is not inserted correctly, d will appear
in the monitor and images will be recorded to
internal memory.
3
Close the battery-chamber cover.
Inserting a Memory Card
Inserting a Memory Card
10
Inserting a Memory Card
Removing Memory Cards
After confirming that the camera
is off, press the card in and then
release it slowly. The card can
now be removed by hand.
C Cautions
The memory card may spring out if you remove
your finger immediately after pushing the card in.
Memory cards may be warm to the touch after
being removed from the camera. This is normal
and does not indicate a malfunction.
C Cautions
Do not turn the camera off or remove the memory card
while the memory card is being formatted or data are being
recorded to or deleted from the card. Failure to observe
this precaution could damage the card.
Format SD memory cards before first use, and be
sure to reformat all memory cards after using them
in a computer or other device. For more information
on formatting memory cards, see page 77.
Memory cards are small and can be swallowed;
keep out of reach of children. If a child swallows a
memory card, seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller
than the standard dimensions of an SD card may not
eject normally; if the card does not eject, take the
camera to an authorized service representative. Do
not forcibly remove the card.
Do not affix labels to memory cards. Peeling labels
can cause camera malfunction.
Movie recording may be interrupted with some
types of SD memory card.
The data in internal memory may be erased or
corrupted when the camera is repaired. Please note
that the repairer will be able to view pictures in
internal memory.
Formatting a memory card or internal memory
in the camera creates a folder in which pictures
are stored. Do not rename or delete this folder or
use a computer or other device to edit, delete, or
rename image files. Always use the camera to delete
pictures from memory cards and internal memory;
before editing or renaming files, copy them to a
computer and edit or rename the copies, not the
originals.
First Steps
11
Turning the Camera on and off
Shooting Mode
Shooting Mode
Press the n button to turn the camera on.
The lens will extend and the lens cover will open.
Press n again to turn the camera off.
B Tip: Switching to Playback Mode
Press the D button for about a second to start
playback. Press the shutter button halfway to return
to shooting mode.
C Cautions
Forcibly preventing the lens from extending could
cause damage or product malfunction.
Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
• The n button does not completely disconnect
the camera from its power supply.
Playback Mode
Playback Mode
To turn the camera on and begin playback, press
the D button for about a second.
Press the n button to turn the camera off.
B Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the D button to return to playback.
B Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the
o AUTO POWER OFF menu (pg. 79). To turn the camera on, use the n button or press the D button
for about a second.
12
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 73).
1
Choose a language.
START MENU
SET NO
ENGLISH
DEUTSCH
FRANCAIS
1.1 Press the selector up or down
to highlight a language.
1.2 Press MENU/OK.
2
Set the date and time.
SET NO
DATE / TIME NOT SET
2012
2011
2009
2008
1. 1 12
:
00
AM
2010
YY. MM. DD
2.1 Press the selector left or right to
highlight the year, month, day,
hour, or minute and press up
or down to change. To change the order
in which the year, month, and day are
displayed, highlight the date format and
press the selector up or down.
2.2 Press MENU/OK.
A Note
Go to the setup menu if you try to set the language
and date again (pg. 73).
B
Tip: The Camera Clock
If the battery is removed for an extended
period, e DATE/TIME will be cleared and the
language-selection dialog will be displayed
when the camera is turned on. Set up the
camera again. If the battery has been left in the
camera for about 2 hours or more, the battery
can be removed for about 24 hours without
resetting the clock.
13
Basic Photography and Playback
Taking Pictures in SRC (SCENE RECOGNITION) Mode
This section describes how to take pictures in SRC (SCENE RECOGNITION) mode.
1
Turn the camera on.
Press the n button to turn the
camera on.
2
Select SRC mode.
Rotate the mode dial to SRC.
B Tip: SCENE RECOGNITION
Simply by pointing the camera to the subject, the
camera automatically analyzes and selects the most
appropriate setting using scene recognition.
3
Check the battery level.
Check the battery level in the display.
qwe
r
Indicator
Indicator
Description
Description
Q
(white)
Battery partially discharged.
P
(white)
Battery more than half discharged.
O
(red)
Low battery. Charge as soon as
possible.
N
(blinks red)
Battery exhausted. Turn camera off
and charge battery.
14
Taking Pictures in SRC (SCENE RECOGNITION) Mode
4
Frame a picture using the zoom control.
The camera analyzes a subject based on
scene recognition, then an icon appears in
the bottom left of the monitor.
(The illustration shows
when the camera
analyzed subject(s) in
portrait.)
Subject
Subject
Icon
Icon
Description
Description
PORTRAIT
H
For soft-toned portraits with
natural skin tones.
LANDSCAPE
I
For crisp, clear daylight shots of
buildings and landscapes.
NIGHT
J
For night and twilight scenes,
using a high sensitivity setting
to minimize blurring.
MACRO
K
For clear close-ups of flowers,
etc.
BACKLIT
PORTRAIT
T
For a subject backlit against
the sun, preventing the
background from becoming
dim.
NIGHT
PORTRAIT
Z
For a subject in a dim place,
reducing blur.
B
Tip
When a subject can not be analyzed by the camera,
LAUTO mode will be set.
A Notes
B Intelligent Face Detection is turned on
automatically.
The camera continuously adjusts focus on a face, or
the center area of the monitor.
Continuous auto focus will be audible and will
increase battery drain.
Macro mode is set when K is set.
15
Basic Photography and Playback
Taking Pictures in SRC (SCENE RECOGNITION) Mode
How to use the zoom control
Select B to zoom out Select A to zoom in
Zoom indicator
Holding the Camera
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
fingers and other objects
away from the lens and
flash.
f DIGITAL IS
If the subject is poorly lit, blurring caused by camera shake can be reduced by activating the Z DIGITAL IS
(pg. 75). Note that blurring may still occur depending on the scene or shooting conditions.
A Note
When the setting is off, i is displayed.
16
Taking Pictures in SRC (SCENE RECOGNITION) Mode
Framing Guideline (Best Framing)
In shooting mode, press DISP/BACK to select a
shooting display format. The selection changes
each time DISP/BACK is pressed.
BEST FRAMING
INFORMATION ON
INFORMATION OFF
Best Framing: To use the best framing, position the
main subject at the intersection of two lines or
align one of the horizontal lines with the horizon.
5
Focus.
Press the shutter button halfway
to focus.
A Note
The lens may make a noise when the camera
focuses. This is normal.
If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, the red colored
focus frame and R will appear in the
monitor, and the indicator lamp will blink
green. Change the composition or use
focus lock (pg. 27).
17
Basic Photography and Playback
Taking Pictures in SRC (SCENE RECOGNITION) Mode
6
Shoot.
Smoothly press the shutter
button the rest of the way down
to take the picture.
B Tip: The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway (
q
) sets focus and exposure;
to shoot, press the shutter button the rest of the way
down (
w
).
qw
Press halfway
Press the rest of
the way down
Double
beep
Click
A Note
If the subject is poorly lit, the flash may fire when the
picture is taken. For information on using the flash
when lighting is poor, see page 32.
The Indicator Lamp
Indicator lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green Focus locked.
Blinks green
Blur, focus, or exposure warning.
Picture can be taken.
Blinks green
and orange
Recording pictures. Additional
pictures can be taken.
Glows
orange
Recording pictures. No additional
pictures can be taken at this time.
Blinks orange
Flash charging; flash will not fire
when picture is taken.
Blinks red Lens or memory error.
B Tip: Warnings
Detailed warnings appear in the display. See pages
91–94 for more information.
18
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
1
Press the D button.
The most recent picture will be displayed in
the monitor.
12 / 31 / 2050
12 / 31 / 2050
10 : 00
AM
10 : 00
AM
1/250
1/250
F
3.3
F
3.3
100-0001
100-0001
400
400
N
N
2
View additional pictures.
Press the selector right to view
pictures in the order recorded, left
to view pictures in reverse order.
Press the shutter button to exit to shooting
mode.
Deleting Pictures
To delete the picture currently displayed
in the monitor, press the selector up (I).
The following dialog will be displayed.
SET
ERASE OK?
CANCEL
OK
To delete the picture, highlight OK and
press MENU/OK. To exit without deleting
the picture, highlight CANCEL and press
MENU/OK.
B Tip: The Playback Menu
Pictures can also be deleted from the playback
menu (pg. 43).
19
More on Photography
Shooting Mode
Choose a shooting mode according to the scene or type of subject. To choose a shooting mode,
rotate the mode dial to the desired setting (pg. 4). The following modes are available:
SR
SR
C
C
SCENE RECOGNITION
SCENE RECOGNITION
Simply by pointing the camera to the subject,
the camera automatically analyzes and selects
the most appropriate setting using scene
recognition.
SeeTaking Pictures in SRC (SCENE
RECOGNITION) mode” (pg. 13).
k
k
AUTO
AUTO
Choose for crisp, clear snapshots. This mode is
recommended in most situations.
P
P
PROGRAM AE
PROGRAM AE
Program AE sets both shutter speed and lens
aperture. The camera lets you control camera
settings such as exposure compensation (pg. 29),
white balance (pg. 63), and ISO sensitivity (pg. 62).
A
A
NATURAL &
NATURAL &
K
K
This mode helps ensure good results with backlit
subjects and in other situations with difficult
lighting. Each time the shutter button is pressed,
the camera takes two shots: one shot without
the flash to preserve natural lighting, followed
immediately by a second shot with the flash. Do
not move the camera until shooting is complete.
A Notes
Do not use where flash photography is prohibited.
The flash will fire even in silent mode.
Only available if memory remains for two pictures.
B
B
NATURAL LIGHT
NATURAL LIGHT
Capture natural light indoors, under low light, or
where the flash can not be used. The flash turns
off and sensitivity is raised to reduce blur.
20
Shooting Mode
D
D
/
/
E
E
SCENE POSITION
SCENE POSITION
The camera offers a choice of “scenes,” each
adapted to particular shooting conditions or a
specific type of subject, which can be assigned
to the D/E position on the mode dial:
1
Rotate the mode dial to D/E.
2
Press MENU/OK to display the
following menu.
3
Highlight A SCENE POSITION.
4
Press the selector right to display
shooting mode options.
5
Press the selector up or down to
highlight a scene (pg. 23).
CANCELSET
PORTRAIT
Portrait with soft
overall tone and
beautiful skin tones
6
Press MENU/OK to select the
highlighted option.
7
Press DISP/BACK to exit from the
menu.
Until the setting is changed as described above,
the chosen scene will be selected whenever the
mode dial is rotated to D/E.
21
More on Photography
Shooting Mode
U
U
PORTRAIT
PORTRAIT
Choose this mode for soft-toned portraits with
natural skin tones.
d
d
BABY MODE
BABY MODE
Choose for natural skin tones when taking
portraits of infants. The flash turns off
automatically.
2
2
SMILE&SHOOT
SMILE&SHOOT
The shutter is released automatically when
Intelligent Face Detection detects a smiling face.
K
K
LANDSCAPE
LANDSCAPE
Choose this mode for crisp, clear daylight shots
of buildings and landscapes.
N
N
MOTION PANORAMA
MOTION PANORAMA
In this mode, you can take up to three pictures
and join them together to form a panorama.
Use of a tripod is recommended to assist in
composing overlapping shots.
1
Select N.
2
Press the selector up to select a frame. Press
the selector left or right to highlight a pan
direction and press MENU/OK.
3
Take a photograph. Exposure and
white balance for the panorama are
set with the first shot.
A Notes
To end shooting and create a panorama after
the first or second shot, press the multi selector
up after completing Step 3 or Step 4 and
proceed to Step 6.
The camera zooms all the way out and zoom
remains fixed at the widest angle until shooting
is complete.
22
Shooting Mode
4
Frame the next shot to overlap with the
previous picture by superimposing y on
so that they form a solid circle (z). The
camera will release the shutter automatically.
Display after 1st shot Shutter released
2
3
1
END
CANCEL
2
3
1
END
CANCEL
Pan direction
5
Take the last shot as described in Step 4.
6
Press MENU/OK to save the picture.
C Cautions
Panoramas are created from multiple frames. The
camera may in some cases be unable to stitch the
frames together perfectly.
The desired results may not be achieved with
moving subjects, subjects close to the camera,
unvarying subjects such as the sky or a field of grass,
subjects that are in constant motion, such as waves
and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if
the subject is poorly lit.
For Best Results
Do not tilt the camera up, down, left, or right when
moving.
• When y and overlap, do not move the camera.
Printing Panoramas
Depending on the page size and the size of the
panorama, panoramas may print with their edges
cropped out or with wide margins at the top and
bottom or at both sides.
23
More on Photography
Shooting Mode
L
L
SPORT
SPORT
Choose this mode when photographing moving
subjects. Priority is given to faster shutter
speeds.
D
D
NIGHT
NIGHT
A high sensitivity setting is selected
automatically to minimize blurring for recording
night and twilight scenes.
U
U
NIGHT (TRIPOD)
NIGHT (TRIPOD)
Slow shutter speeds are used to record night
scenes. Use of a tripod is recommended to
prevent camera shake.
W
W
FIREWORKS
FIREWORKS
Slow shutter speeds are used to capture the
expanding burst of light from a firework. Press
the selector left or right to choose a shutter
speed. Use of a tripod is recommended to
prevent blur. The flash turns off automatically.
E
E
SUNSET
SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.
F
F
SNOW
SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining white
snow.
G
G
BEACH
BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.
I
I
PARTY
PARTY
Capture indoor background lighting under low-
light conditions.
O
O
FLOWER
FLOWER
Choose for vivid close-ups of flowers. The
camera focuses in the macro range and the flash
turns off automatically.
P
P
TEXT
TEXT
Take clear pictures of text or drawings in print.
The camera focuses in the macro range.
24
B Intelligent Face Detection
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits (in vertical or horizontal orientations) to prevent the camera from focusing on the
background. Intelligent Face Detection also offers a red-eye removal option for removing “red-eye”
effects caused by the flash.
1
Turn Intelligent Face Detection on.
1.1 Press MENU/OK to display the
shooting menu.
EXIT
1
/2
SHOOTING MENU
ISO
FINEPIX COLOR
IMAGE SIZE
IMAGE QUALITY
AUTO
AUTO
N
PROGRAM AE
WHITE BALANCE
1.2 Press the selector up or
down to highlight 3 FACE
DETECTION.
1.3 Press the selector right
to display Intelligent Face
Detection options.
1.4 Press the selector up or down
to highlight the desired
option.
1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
B icon appears in monitor
when Intelligent Face
Detection is on.
A Note
When removing red-eye effect, select ON for
a RED EYE REMOVAL in the setup menu (pg.
75).
2
Frame the picture.
If a face is detected, it will
be indicated by a green
border. If there is more
than one face in the
frame, the camera will
select the face closest
to the center; other faces are indicated by
white borders.
Green borderGreen border
25
More on Photography
3
Focus.
Press the shutter button halfway
to focus on the subject in the
green border. Note that, in some
shooting modes, exposure is
adjusted for the current shooting mode
and may not be optimized for the selected
subject.
C Caution
If no face is detected when the shutter button is
pressed halfway (pg. 86), the camera will focus
on the subject at the center of the display and
red-eye will not be removed.
4
Shoot.
Press the shutter button all the
way down to shoot.
C Caution
If the subject moves as the shutter button
is pressed, their face may not be in the area
indicated by the green border when the picture
is taken.
B Tip: Red-Eye Removal
Select ON for the R SAVE ORG IMAGE option
in the setup menu (pg. 75) to save unprocessed
copies of pictures created with red-eye removal.
Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group- or self-
portraits (pg. 34).
7
77
The following functions can be used with Intelligent
Face Detection.
RED EYE REMOVAL (pg. 67)/IMAGE SEARCH
(pg. 41)/SLIDE SHOW (pg. 66)/IMAGE DISP. >
ZOOM(CONTINUOUS) (pg. 77)/PRINT ORDER
(DPOF) (pg. 52)/CROP (pg. 68)
B Intelligent Face Detection
26
BLINK DETECTION
BLINK DETECTION
When using Intelligent Face Detection, the
camera can display a warning after taking the
picture if it detects that someone has blinked.
You can then check the person’s eyes and re-take
the picture if necessary.
To use this feature, make sure that FACE
DETECTION is set to ON (pg. 24) and that
J BLINK DETECTION is set to ON (pg. 75) in
the setup menu.
If an option other than OFF is selected for
a IMAGE DISP. , a warning will be displayed
if the camera detects subjects who may
have blinked when the picture was taken. If
ZOOM(CONTINUOUS) is selected, you can press
the F button to zoom in on these subjects; a
new face is selected each time the F button is
pressed.
BLINK DETECTION BLINK DETECTION
STORE
ERASE
FACE ZOOM
STORE
ERASE
NEXT
If you are satisfied with the results, press MENU/OK
to save the image. If you want to try again, press
the selector up to delete the image and then
take another shot.
C Caution
If a IMAGE DISP. is set to OFF, the camera will not
detect closed eyes even if BLINK DETECTION is set
to ON.
B I
ntelligent Face Detection
27
More on Photography
Focus Lock
To compose photographs with off-center subjects:
1
Position the subject in the focus frame.
2
Focus.
Press the shutter button halfway to set
focus and exposure. Focus and exposure
will remain locked while the shutter button
is pressed halfway (AF/AE lock).
250
250
F
3.3
F
3.3
Press
halfway
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
3
Recompose the picture.
Keeping the shutter button pressed
halfway, recompose the picture.
250
250
F
3.3
F
3.3
4
Shoot.
Press the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
28
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 27) to focus on another
subject at the same distance and then recompose the photograph.
Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same
color as the background).
Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
29
More on Photography
5 Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
1
Press the selector up (l).
The exposure indicator will be displayed.
SET
2
Choose a value.
Press the selector button. The effect is
visible in the display.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
3
Return to shooting mode.
Press MENU/OK to return to
shooting mode.
4
Take pictures.
A Note
A 5 icon and exposure indicator are displayed at
settings other than ±0. Exposure compensation is not
reset when the camera is turned off; to restore normal
exposure control, choose a value of ±0.
30
Choosing an Exposure Compensation Value
Backlit subjects: choose values from +
2
/
3 EV to +1
2
/
3 EV (for an explanation of the term “EV,
see the Glossary on page 95)
Highly reflective subjects or very bright scenes (e.g., snowfields): +1 EV
Scenes that are mostly sky: +1 EV
Spotlit subjects (particularly if photographed against dark backgrounds): –
2
/
3 EV
Subjects with low reflectivity (pine trees or dark-colored foliage): –
2
/
3 EV
5 Exposure Compensation
31
More on Photography
L Macro Mode (Close-ups)
For close-ups, press the selector left (L). The selection changes each time the selector is pressed.
MACRO
OFF
When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the
zoom control to compose pictures.
A Notes
Use of a tripod is recommended to prevent blur caused by camera shake.
The flash may fail to light the entire subject at very short ranges. Increase the distance to the subject and try
again.
32
K Using the Flash (Intelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
1
Choose a flash mode.
Press the selector right (K). The flash mode changes each time the
selector is pressed; in modes other than 4, the current mode
is indicated by an icon in the display. Choose from the following
options:
Mode
Mode
Description
Description
4 (AUTO FLASH)
The flash fires when required. Recommended in most situations.
K (FORCED FLASH)
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
W (SUPPRESSED
FLASH)
The flash does not fire even when the subject is poorly lit. 0 will appear in the
monitor at slow shutter speeds to warn that pictures may be blurred. Use of a
tripod is recommended.
T (SLOW SYNCHRO)
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
33
More on Photography
2
Focus.
Press the shutter button halfway
to focus. If the flash will fire,
X will be displayed when the
shutter button is pressed halfway.
At slow shutter speeds, 0 will appear in
the display to warn that pictures may be
blurred; use of a tripod is recommended.
3
Shoot.
Press the shutter button the rest
of the way down to shoot.
C Caution
The flash may fire several times with each shot.
Do not move the camera until shooting is
complete.
Red-Eye Removal
When Intelligent Face Detection is active
(pg. 24), and ON is selected for a RED
EYE REMOVAL in the setup menu (pg.
75), red-eye removal is available in V,
U, and Z. Red-eye removal minimizes
red-eye” caused when light from the flash is
reflected from the subjects retinas as shown in the
illustration at right.
U Silent Mode
In situations in which camera sounds or light from
the flash may be unwelcome, press the DISP/BACK
button until U is displayed in the monitor.
The camera speaker, shooting indicator, flash, and
indicator and self-timer lamps turn off (note that the
flash will still fire in A mode). Flash and volume
settings (pg. 74) can not be adjusted while silent
mode is in effect. To restore normal operation, press
the DISP/BACK button until the U icon is no longer
displayed.
K Using the Flash (Intelligent Flash)
34
J Using the Self-Timer
The camera offers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the
shutter button is pressed. The self-timer is available in all shooting modes.
1
Set the timer.
Press the selector down (J). The selection changes each time the selector is pressed. The
current self-timer mode is displayed in the monitor.
OFF
OFF
Choose from y (self-timer off),
c (10 s delay), or b (2 s delay)
2
Focus.
Press the shutter button halfway to focus.
C Caution
Stand behind the camera when using the shutter button. Standing in front of the lens can
interfere with focus and exposure.
3
Start the timer.
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
9
9
35
More on Photography
The self-timer lamp on the front of the camera will blink
immediately before the picture is taken. If the two-
second timer is selected, the self-timer lamp will blink
as the timer counts down.
Intelligent Face Detection
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 24) is
recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with
Intelligent Face Detection, turn Intelligent Face Detection on, set the timer as described in Step 1, and then
press the shutter button all the way down to start the timer. The camera will detect faces while the timer is
counting down and adjust focus and exposure immediately before the shutter is released. Be careful not to
move until the picture has been recorded.
J Using the Self-Timer
36
More on Playback
Playback Options
To view the most recent picture in the monitor,
press the D button.
12 / 31 / 2050
12 / 31 / 2050
10 : 00
AM
10 : 00
AM
1/250
1/250
F
3.3
F
3.3
100-0001
100-0001
400
400
N
N
Press the selector right to view pictures
in the order recorded, left to view
pictures in reverse order. Keep the
selector pressed to scroll rapidly to the desired
frame.
Choosing a Display Format
In playback mode, press DISP/BACK to select a
playback display format.
The selection changes each time DISP/BACK is
pressed.
12 / 31 / 2050 10
12 / 31 / 2050 10:
00
00
AM
AM
12 / 31 / 2050 10: 00
AM
100-0001
100-0001
100-0001
3
INFORMATION ON INFORMATION OFF
12 / 31 / 2050
12 / 31 / 2050
10 : 00
AM
10 : 00
AM
1/250
1/250
F
3.3
F
3.3
100-0001
100-0001
400
400
N
N
I FAVORITES
A Note
Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.
37
More on Playback
Playback Options
Favorites: Rating Picture
Favorites: Rating Picture
To rate the picture currently displayed in full-
frame playback, press DISP/BACK and press the
selector up and down to select from zero to five
stars.
B
Tip: Favorites
Ratings can be used for image search (pg. 41).
Playback Zoom
Playback Zoom
Select A to zoom in on pictures displayed in
single-frame playback; select B to zoom out.
When the picture is zoomed in, the selector can
be used to view areas of the image not currently
visible in the display.
Navigation window shows
portion of image currently
displayed in monitor
Zoom indicator
Press DISP/BACK to exit zoom.
A Note
The maximum zoom ratio varies with image size.
Playback zoom is not available with images saved or
cropped at the size of t, or copies created with
j RESIZE (pg. 69).
Intelligent Face Detection
Pictures taken with Intelligent
Face Detection (pg. 24) are
indicated by a B icon. Press
the F button to zoom in on the
subject selected with Intelligent
Face Detection. You can then
use the zoom control to zoom in and out.
BACKFACE ZOOM
38
Playback Options
Multi-Frame Playback
Multi-Frame Playback
To change the number of images displayed,
select B when a picture is shown full-frame in
the monitor.
10 : 00
AM
10 : 00
AM
12 / 31 / 2050
12/31/2050
Select B to
increase the
number of
pictures displayed
to one frame with
previous and next,
two, nine, and a
hundred.
Select
A
to
reduce the
number of images
displayed.
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
B Tip: Two-Frame Display
Two-frame display can be used
to compare pictures taken in A
mode.
39
More on Playback
k PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select k PHOTOBOOK ASSIST in the
playback menu.
2
Highlight NEW BOOK.
3
Press MENU/OK to display the new
book dialog.
4
Choose pictures for the new book.
SELECT FROM ALL: Choose from all the
pictures available.
SELECT BY IMAGE SEARCH: Choose from
pictures matching selected search
conditions (pg. 41).
A Note
Neither photographs t or smaller nor movies
can be selected for photobooks.
5
Scroll through the images and press the
selector up to select or deselect the current
image for inclusion in the book. To display
the current image on the cover, press the
selector down.
A Note
The first picture selected automatically becomes
the cover image. Press the selector down to select
a different picture for the cover.
6
Press MENU/OK to exit when the
book is complete.
7
Highlight COMPLETE PHOTOBOOK.
EXIT
SELECT IMAGES FOR PHOTOBOOK
SELECT ALL
COMPLETE PHOTOBOOK
A Note
Choose SELECT ALL to select all photos, or all
photos matching the specified search conditions,
for the book.
40
8
Press MENU/OK. The new book
will be added to the list in the
photobook assist menu.
C Cautions
Photobooks can contain up to 300 pictures.
Books that contain no photos are automatically
deleted.
PhotoBooks
Photobooks can be copied to a computer using the
supplied MyFinePix Studio software.
Viewing PhotoBooks
Viewing PhotoBooks
Highlight a book in the photobook assist menu
and press MENU/OK to display the book, then
press the selector left and right to scroll through
the pictures. Press DISP/BACK to return to the
photobook assist menu.
Editing and Deleting PhotoBooks
Editing and Deleting PhotoBooks
1
Display the photobook and press
MENU/OK to view book edit options.
2
Choose from the following options:
EDIT: Edit the book as described in
“Creating a PhotoBook” on page 39.
ERASE: Delete the current photobook.
3
Follow the on-screen instructions.
i PhotoBook Assist
41
More on Playback
V Image Search
Image Search based on categories
Image Search based on categories
Search for pictures by date, subject, scene, and
file type.
1
Press MENU/OK to display the
playback menu.
2
Press the selector up or down to
highlight V IMAGE SEARCH.
3
Press MENU/OK to display the search
category.
4
Press the selector up or down
to highlight the desired search
category.
Option
Option
Description
Description
BY DATE
Show images based on the
specified date.
BY FACE
Show images based on
specified face information.
BY I FAVORITES
Find all pictures with a specified
rating (pg. 37).
BY SCENE
Show images based on the
specified scene mode.
BY TYPE OF DATA
Show images based on whether
still pictures or movies.
5
Press MENU/OK to select the
highlighted search category.
A detailed search list will be
displayed.
6
Select a category in the list.
Specified Images will be displayed.
42
Using Playback Menu with Image Search
Using Playback Menu with Image Search
Three playback menus can be performed with
image search mode.
1
Press MENU/OK while the search
results are displayed.
The playback menu will be
displayed.
2
Press the selector up or down to
highlight the desired menu item.
3
Press MENU/OK to select the
highlighted menu.
B Tips
For each operation, refer to the page listed.
Option
Option
See Page
See Page
M ERASE
43
O PROTECT
67
q SLIDE SHOW
66
• Select EXIT SEARCH to go back to the normal
playback mode.
V Image Search
43
More on Playback
M Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on
deleting pictures in single-frame playback, see page 18). Note that deleted pictures can not be
recovered. Copy important pictures to a computer or other storage device before proceeding.
1
Press MENU/OK to display the
playback menu.
2
Press the selector up or down to
highlight M ERASE.
3
Press the selector right to display
delete options.
1
/2
PLAYBACK MENU
RED EYE REMOVAL
ERASE
IMAGE SEARCH
SLIDE SHOW
PROTECT
PHOTOBOOK ASSIST
BACK
FRAME
ALL FRAMES
4
Press the selector up or down to
highlight FRAME or ALL FRAMES.
5
Press MENU/OK to display options for
the selected item (see following
page).
B Tips: Deleting Pictures
When a memory card is inserted, pictures will be
deleted from the memory card; otherwise, pictures
will be deleted from internal memory.
Protected pictures can not be deleted. Remove
protection from any pictures you wish to delete (pg.
67).
If a message appears stating that the selected
images are part of a DPOF print order, press MENU/OK
to delete the pictures.
44
FRAME
FRAME
: Deleting Selected Images
: Deleting Selected Images
Selecting FRAME displays the
dialog shown at right.
YES CANCEL
ERASE OK?
Press the selector left or right
to scroll through pictures and
press MENU/OK to delete the
current picture (the picture
is deleted immediately; be
careful not to delete the
wrong picture).
Press DISP/BACK to exit when all the desired
pictures have been deleted.
ALL FRAMES
ALL FRAMES
: Deleting All Images
: Deleting All Images
Selecting ALL FRAMES
displays the confirmation
shown at right.
ERASE ALL OK?
IT MAY TAKE A WHILE
SET
CANCEL
OK
Highlight OK and press MENU/
OK to delete all unprotected
pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel
before all pictures have been
deleted (any pictures deleted
before the button was pressed can not be
recovered).
CANCELCANCEL
M Deleting Pictures
45
Movies
1
Rotate the mode dial to A (movie
mode).
STANDBY
12
s
Display shows time
available
2
Press the shutter button all the way
down to start recording.
REC
12
s
12
s
z REC and time
remaining are
displayed
B Tip
There is no need to keep the shutter button pressed
during recording.
Zoom control during movie recording
The camera lets you zoom in and out during movie
recording. Select the type of zoom available in
movie mode from the setup menu (pg. 75).
2 OPTICAL: sounds will not be recorded during
zoom operation.
1 DIGITAL: it may produce lower quality images
than optical zoom.
A Notes
Focus is set when recording begins; exposure
and white balance are adjusted automatically
throughout recording. The color and brightness
of the image may vary from that displayed before
recording begins.
Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
A Recording Movies
Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not
cover the microphone during recording.
46
3
Press the shutter button halfway
to end recording. Recording ends
automatically when the movie
reaches maximum length or
memory is full.
A Note
Movies are recorded as monaural motion JPEG files.
Choosing the Frame Size
To choose the frame size, press MENU/OK and select
o QUALITY.
Choose a pixel size in the following:
)1280 (1280 × 720) for high definition movies
! (640 × 480) for standard definition movies
9 (320 × 240) for longer movies
1
/1
SHOOTING MENU
QUALITY
10m59s
15m00s
5m00s
1280
A Recording Movies
47
Movies
D Viewing Movies
During playback, movies are
displayed in the monitor as
shown at right. The following
operations can be performed
while a movie is displayed:
PLAY
100-006
100-006
12 / 31 / 2050
12 / 31 / 2050
10 : 00
AM
10 : 00
AM
Operation
Operation
Description
Description
Start/pause
playback
Press the selector down to start playback.
Press again to pause.
End
playback/
delete
Press the selector up to end playback. If
playback is not in progress, pressing the
selector up will delete the current movie.
Advance/
rewind
Press the selector right to advance, left to
rewind. If playback is paused, the movie
will advance or rewind one frame each
time the selector is pressed.
Adjust
volume
Press MENU/OK to pause playback and
display volume controls. Press the
selector up or down to adjust the
volume; press MENU/OK again to resume
playback.
Progress is shown in the monitor during
playback.
15
s
15
s
STOP PAUSE
Progress bar
B Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
C Caution
Do not cover the speaker during playback.
48
Connections
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
Connect an A/V cable (optional), as shown below. Be sure that the camera is off before connecting
the cable.
Connect yellow plug
to video-in jack
Connect white plug
to audio-in jack
Insert an optional
A/V cable into the
USB multi-connector
of the camera.
Press D for about a second to turn the camera on. The camera monitor turns off and pictures and
movies are played back on the TV. Note that the camera volume controls have no effect on sounds
played on the TV; use the television volume controls to adjust the volume.
A Note
Image quality drops during movie playback.
C Cautions
When connecting the cable, be sure the connectors are fully inserted.
HD movies are played back as standard definition movies on the TV if using an optional A/V cable.
To play back High Definition movies on HDTV, optional accessories are required. For more information, please
refer to the following URL.
http://www.fujifilm.com/products/digital_cameras/index.html
49
Connections
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown
and turn the printer on.
2
Press the D button for about a second
to turn the camera on. w USB will be
displayed in the monitor, followed by the
PictBridge display shown below at right.
USB
00
OK SET
FRAME
PICTBRIDGE
TOTAL:
00000
SHEETS
Printing Selected Pictures
Printing Selected Pictures
1
Press the selector left or right to
display a picture you wish to print.
A Note
To print one copy of the current picture, proceed
directly to Step 3.
2
Press the selector up or down to
choose the number of copies (up
to 99). Repeat steps 12 to select
additional pictures.
3
Press MENU/OK to display a
confirmation dialog.
PRINT THESE FRAMES
TOTAL:
9
SHEETS
YES CANCEL
4
Press MENU/OK to start printing.
50
Printing Pictures via USB
B Tip: Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in steps 12 to display the PictBridge menu
(see “Printing the DPOF Print Order,” on pg. 51).
Press the selector up or down to highlight PRINT
WITH DATE y and press MENU/OK to return to the
PictBridge display (to print pictures without the date
of recording, select PRINT WITHOUT DATE). To
ensure that the date is correct, set the camera clock
before taking pictures. Note that the PRINT WITH
DATE y option is only available with printers that
support date printing.
A Notes
Print pictures from internal memory or a memory
card that has been formatted in the camera.
When pictures are printed via direct USB connection,
page size, print quality, and border selections are
made using the printer.
During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has
printed).
PRINTING
CANCEL
If printing is interrupted, press D to turn the camera
off and then on again.
Disconnecting the Camera
Confirm that the above message is not displayed
and turn the camera off. Disconnect the USB cable.
51
Connections
Printing Pictures via USB
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with r PRINT
ORDER (DPOF) in the playback menu (pg. 52):
1
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
PRINT DPOF
PRINT WITH DATE
PRINT WITHOUT DATE
PICTBRIDGE
2
Press the selector up or down to
highlight x PRINT DPOF.
3
Press MENU/OK to display a
confirmation dialog.
YES CANCEL
PRINT DPOF OK?
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
52
Printing Pictures via USB
The r PRINT ORDER (DPOF) option in the
playback menu can be used to create a digital
“print order” for PictBridge-compatible printers
(pg. 51) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is
standard that allows pictures to be printed
from “print orders” stored in internal
memory or on a memory card. The information in
the order includes the pictures to be printed and the
number of copies of each picture.
WITH DATE
WITH DATE y
/ WITHOUT DATE
/ WITHOUT DATE
To modify the DPOF print order, select r PRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE y or WITHOUT DATE.
2
/2
PLAYBACK MENU
RESIZE
COPY
CROP
PRINT ORDER
IMAGE ROTATE
WITH DATE
WITHOUT DATE
RESET ALL
WITH DATE y: Print date of
recording on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the selector left or right
to display a picture you wish to
include in or remove from the print
order.
2
Press the selector up or down to
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
SHEETS
DPOF:
00001
01
PRINT ORDER
(
DPOF
)
SET
FRAME
Total number of prints
Number of copies
B Tip: Intelligent Face Detection
If the current picture was created with Intelligent
Face Detection, pressing F sets the number of
copies to the number of faces detected.
Creating a DPOF Print Order
Creating a DPOF Print Order
53
Connections
Printing Pictures via USB
3
Repeat steps 12 to complete the
print order. Press MENU/OK to save
the print order when settings
are complete, or DISP/BACK to exit without
changing the print order.
4
The total number of prints is
displayed in the monitor. Press
MENU/OK to exit.
The pictures in the current
print order are indicated by a
x icon during playback.
A Notes
Remove the memory card to create or modify a print
order for the pictures in internal memory.
Print orders can contain a maximum of 999 pictures.
If a memory card is inserted
containing a print order
created by another camera, the
message shown at right will be
displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as described above.
• Whether WITH DATE y/WITHOUT DATE is
available may depend on the printer setting. Check
the printer.
RESET ALL
RESET ALL
To cancel the current print
order, select RESET ALL in the
r PRINT ORDER (DPOF)
menu. The confirmation
shown at right will be
displayed; press MENU/OK to remove all pictures
from the order.
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
54
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored,
viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT
connect the camera to the computer until installation is complete.
Installing the Software
Installing the Software
Two applications are supplied: MyFinePix Studio for Windows and FinePixViewer for the Macintosh.
Installation instructions for Windows are on pages 54–55, those for the Macintosh on pages 56–57.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Confirm that the computer meets the following system requirements:
Windows 7*
Windows 7*
Windows Vista*
Windows Vista*
Windows XP*
Windows XP*
CPU
CPU 3 GHz Pentium 4 or better 2 GHz Pentium 4 or better
RAM
RAM 1 GB or more 512 MB or more
Free disk space
Free disk space 15 GB or more 2 GB or more
Video
Video
1,024 × 768 pixels or more with 24-bit color or better
A graphics processing unit (GPU) that supports DirectX 7 or later
Other
Other
Built-in USB port recommended. Operation is not guaranteed other USB ports.
Internet connection required (broadband-type recommended) to use the auto update, FinePix Internet
Service, and e-mail features. Internet connection also required when installing .NET Frameworks.
* Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
55
Connections
Viewing Pictures on a Computer
2
Start the computer. Log in to an account with administrator privileges before proceeding.
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;
click Yes (Windows 7) or click Allow (Windows Vista).
The installer will start automatically; click Installing MyFinePix Studio and follow the on-screen
instructions to install MyFinePix Studio.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.EXE.
4
If prompted to install Windows Media Player, DirectX or .NET Frameworks, follow the on-screen
instructions to complete installation.
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer
CD in a dry location out of direct sunlight in case you need to re-install the software. The
version number is printed at the top of the CD label for reference when updating the software or
contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 58.
56
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Macintosh: Installing FinePixViewer
1
Confirm that the computer meets the following system requirements:
CPU
CPU PowerPC or Intel
OS
OS
Pre-installed versions of Mac OS X version 10.3.9–10.6 (for the latest information, visit http://www.fujifilm.
com/)
RAM
RAM 256 MB or more
Free disk space
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
Video 800 × 600 pixels or more with thousands of colors or better
Other
Other
Built-in USB port recommended. Operation is not guaranteed other USB ports.
Internet connection required (broadband-type recommended) to use the auto update, FinePix Internet
Service, and e-mail features.
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click Installer for Mac OS X.
3
An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter
an administrator name and password when prompted and click OK, then follow the on-screen
instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
57
Connections
Viewing Pictures on a Computer
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number
is printed at the top of the CD label for reference when updating the software or contacting
customer support.
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select
Preferences from the Image Capture application menu. The Image Capture preferences dialog
will be displayed. Choose Other in the When a camera is connected, open menu, then
select FPVBridge in the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start
Image Capture. The camera will be listed under DEVICES; select the camera and choose
FPVBridge from the Connecting this camera opens menu and click Open. Quit Image
Capture.
Installation is now complete. Proceed to “Connecting the Camera” on page 57.
58
Viewing Pictures on a Computer
1
If the pictures you wish to copy are stored
on a memory card, insert the card into the
camera (pg. 8). If no card is inserted, pictures
will be copied from internal memory.
A Note
Windows users may require the Windows CD
when starting the software for the first time.
C Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2
Turn the camera off and connect the supplied
USB cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USB hub or keyboard.
3
Press the D button for about a
second to turn the camera on.
MyFinePix Studio or FinePixViewer will
start automatically; follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click Cancel.
C Caution
If the software does not start automatically,
the software may not be correctly installed.
Disconnect the camera and reinstall the software.
For more information on using the supplied
software, start the application and select the
appropriate option from the Help menu.
Connecting the Camera
Connecting the Camera
59
Connections
Viewing Pictures on a Computer
C Cautions
If a memory card containing a large number of
images is inserted, there may be a delay before the
software starts and you may be unable to import or
save images. Use a memory card reader to transfer
pictures.
Make sure that the computer does not display a
message stating that copying is in progress and that
the indicator lamp is out before turning the camera
off or disconnecting the USB cable (if the number of
images copied is very large, the indicator lamp may
remain lit after the message has cleared from the
computer display). Failure to observe this precaution
could result in loss of data or damage to internal
memory or the memory card.
Disconnect the camera before inserting or removing
memory cards.
In some cases, it may not be possible to access
pictures saved to a network server using
the supplied software in the same way as on a
standalone computer.
The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
Disconnecting the Camera
After confirming that the indicator lamp is out,
follow the on-screen instructions to turn the camera
off and disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no
longer required or before beginning reinstallation.
After quitting the software and disconnecting
the camera, drag the “FinePixViewer” folder from
Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows 7/
Windows Vista) or “Add or Remove Programs”
(Windows XP) to uninstall MyFinePix Studio. Under
Windows, one or more confirmation dialogs may be
displayed; read the contents carefully before clicking
OK.
60
Menus
Using the Menus: Shooting Mode
Using the Shooting Menu
Using the Shooting Menu
1
Press MENU/OK to display the
shooting menu.
EXIT
1
/2
SHOOTING MENU
ISO
FINEPIX COLOR
IMAGE SIZE
IMAGE QUALITY
AUTO
AUTO
N
PROGRAM AE
WHITE BALANCE
2
Press the selector up or down to
highlight the desired menu item.
3
Press the selector right to display
options for the highlighted item.
1
/2
SHOOTING MENU
AUTO
AUTO
N
OFF
c
AUTO
AUTO
IMAGE QUALITY
FINE
NORMAL
4
Press the selector up or down to
highlight the desired option.
5
Press MENU/OK to select the
highlighted option.
6
Press DISP/BACK to exit from the
menu.
61
Menus
Using the Menus: Shooting Mode
Shooting Menu Options
Shooting Menu Options
Menu item
Menu item
Description
Description
Options
Options
Default
Default
1/2
1/2
A SCENE POSITION Choose a scene for D/E mode (pg. 20).
U/d/2/K/N/L/D/U/
W/E/F/G/I/O/P
SP1: N
SP2: 2
n ISO
Adjust ISO sensitivity. Choose higher values
when the subject is poorly lit ; note, however,
that mottling may appear in pictures taken at
high sensitivities.
AUTO / 3200 / 1600 /
800 / 400 / 200 / 100
AUTO
o IMAGE SIZE
Choose image size (pg. 62).
i/y
3:2
/r
16:9
/7/n/
m
16:9
/m/t
i
T IMAGE QUALITY
Choose image quality (pg. 63). FINE / NORMAL NORMAL
p FINEPIX COLOR
Shoot pictures in standard color, saturated
color or black-and-white (pg. 63).
c/M/N
c
C WHITE BALANCE
Adjust color for different light sources (pg. 63).
AUTO/p/q/s/t/u/r
AUTO
2/2
2/2
E CONTINUOUS
Shoot a series of pictures (pg. 64).
m / OFF
OFF
3 FACE DETECTION
Turn Intelligent Face Detection on or off (pg.
24).
ON / OFF OFF
F AF MODE
Choose how the camera selects a focus area
(pg. 64).
w CENTER/X TRACKING w CENTER
A Note
Some options are not available in all shooting modes.
62
Using the Menus: Shooting Mode
n
n
ISO
ISO
Control the camera’s sensitivity to light. Higher
values can be used to reduce blur when lighting
is poor; note, however, that mottling may appear
in pictures taken at high sensitivities. If AUTO
is selected, the camera will adjust sensitivity
automatically in response to shooting conditions.
Settings other than AUTO are shown by an icon
in the display.
o
o
IMAGE SIZE
IMAGE SIZE
Choose the size at which still pictures are
recorded. Large pictures can be printed at large
sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Option
Option
Prints at sizes up to
Prints at sizes up to
i/y3:2
31 × 23 cm (12 × 9 in.) or
31 × 21 cm (12 × 8 in.)
r16:9/7
22 × 16 cm (8.5 × 6.5 in.)
n
17 × 13 cm (7 × 5 in.)
m16:9/m 14 × 10 cm (5.3 × 4 in.)
t
5 × 4 cm (2 × 1.5 in.). Suited to e-mail or
the web.
The number of pictures that can be taken at
current settings (pg. 96) is displayed to the top
right in the monitor.
Aspect Ratio
Pictures with an aspect ratio of 4 : 3 have the same
proportions as the camera display. Pictures with an
aspect ratio of 3 : 2 have the same proportions as a
frame of 35-mm film, while an aspect ratio of 16 : 9 is
suited to display on High Definition (HD) devices.
4 : 3
3 : 2 16 : 9
A Note
Image quality is not reset when the camera is turned
off or another shooting mode is selected.
63
Menus
Using the Menus: Shooting Mode
T
T
IMAGE QUALITY
IMAGE QUALITY
Choose how much image files are compressed.
Select FINE (low compression) for higher image
quality, NORMAL (high compression) to increase
the number of pictures that can be stored.
W
W
FINEPIX COLOR
FINEPIX COLOR
Enhance contrast and color saturation or take
pictures in black and white.
Option
Option
Description
Description
cv-STANDARD
Standard contrast and saturation.
Recommended in most situations.
Mv-CHROME
Vivid contrast and color. Choose
for vivid shots of flowers or
enhanced greens and blues in
landscapes.
Nv-B&W
Take pictures in black and white.
Settings other than v-STANDARD are shown
by an icon in the monitor.
A Notes
FINEPIX COLOR is not reset when the camera is
turned off or another shooting mode is selected.
Depending on the subject, the effects of
Mv-CHROME may not be visible in the monitor.
C
C
WHITE BALANCE
WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of “white
balance,” see the Glossary on page 95).
Option
Option
Description
Description
AUTO
White balance adjusted automatically.
p
For subjects in direct sunlight.
q
For subjects in the shade.
s
Use under “daylight” fluorescent lights.
t
Use under “warm white” fluorescent lights.
u
Use under “cool white” fluorescent lights.
r
Use under incandescent lighting.
If AUTO does not produce the desired results
(for example, when taking close-ups), choose the
option that matches the light source.
A Note
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
64
Using the Menus: Shooting Mode
E
E
CONTINUOUS
CONTINUOUS
Capture motion in a series of pictures. The
camera takes up to three pictures while the
shutter-release button is pressed.
A Notes
Frame rate varies with shutter speed.
Focus and exposure are determined by the first
frame in each series.
The number of pictures that can
be recorded depends on the
memory available. Additional
time may be required to record
pictures when shooting ends.
The pictures are displayed in the
monitor while recording is in progress.
F
F
AF MODE
AF MODE
This option controls how the camera selects the
focus area. Regardless of the option selected, the
camera will focus on the subject in the center of
the monitor when macro mode is on (pg. 31).
w CENTER: The camera focuses on the subject
in the center of the frame. This option can be
used with focus lock.
X TRACKING: When X is set, the focus frame
is displayed in the center of the monitor as
shown. Place the subject in the focus frame
and press the G button to set TRACKING.
The focus frame will track the moving subject,
keeping it in focus.
START TRACKING
CANCEL
A Note
TRACKING may not work depending on the subject.
STORINGSTORING
65
Menus
1
Press D to enter playback mode
(pg. 11).
2
Press MENU/OK to display the
playback menu.
3
Press the selector up or down to
highlight the desired menu item.
4
Press the selector right to display
options for the highlighted item.
5
Press the selector up or down to
highlight the desired option.
6
Press MENU/OK to select the
highlighted option.
Using the Menus: Playback Mode
Using the Playback Menu
Using the Playback Menu
66
Using the Menus: Playback Mode
Playback Menu Options
Playback Menu Options
The following options are available:
Option
Option
Description
Description
1/2
1/2
k PHOTOBOOK
ASSIST
Select images to be included in a
photobook (pg. 39).
V IMAGE SEARCH
Search images based on categories
(pg. 41).
M ERASE
Delete all or selected pictures (pg.
43).
q
SLIDE SHOW
View pictures in a slide show (pg.
66).
a RED-EYE REMOVAL
Create copies with reduced red
eye (pg. 67).
O PROTECT
Protect pictures from accidental
deletion (pg. 67).
R CROP
Create cropped copies of pictures
(pg. 68).
2/2
2/2
j RESIZE
Create small copies of pictures
(pg. 69).
N IMAGE ROTATE
Rotate pictures (pg. 70).
P COPY
Copy pictures between internal
memory and a memory card (pg.
71).
r
PRINT ORDER
(DPOF)
Select pictures for printing on
DPOF- and PictBridge-compatible
devices (pg. 51).
q
q
SLIDE SHOW
SLIDE SHOW
View pictures in an automated slide show.
Choose the type of show and press MENU/OK
to start. Press DISP/BACK at any time during
the show to view on-screen help. When a
movie is displayed, movie playback will begin
automatically, and the slide show will continue
when the movie ends. The show can be ended
at any time by pressing MENU/OK.
A Note
The camera will not turn off automatically while a
slide show is in progress.
Option
Option
Description
Description
NORMAL
Press selector left or right to go back or
skip ahead one frame. Select WIPE for
wipe transitions between frames.
WIPE
NORMAL B
As above, except that camera
automatically zooms in on faces
selected with Intelligent Face detection
(pg. 24).
WIPE B
67
Menus
Using the Menus: Playback Mode
a
a
RED EYE REMOVAL
RED EYE REMOVAL
If the current picture is marked with a B icon
to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove
red-eye. The camera will analyze the image; if
red-eye is detected, the image will be processed
to create a copy with reduced red-eye.
REMOVING
A Notes
Red eye may not be removed if the camera is unable
to detect a face or the face is in profile. Results may
differ depending on the scene. Red eye can not
be removed from pictures that have already been
processed using red-eye removal or pictures created
with other devices.
The amount of time needed to process the image
varies with the number of faces detected.
Copies created with a RED EYE REMOVAL are
indicated by a l icon during playback.
O
O
PROTECT
PROTECT
Protect pictures from accidental deletion. The
following options are available.
FRAME
FRAME
Protect selected pictures.
1
Press the selector left or right to
display the desired picture.
YES CANCEL
PROTECT OK?
UNPROTECT OK?
YES CANCEL
Picture not protected Protected picture
2
Press MENU/OK to protect the
picture. If the picture is already
protected, pressing MENU/OK will
remove protection from the image.
3
Repeat steps 12 to protect
additional images. Press DISP/BACK
to exit when the operation is
complete.
68
Using the Menus: Playback Mode
SET ALL
SET ALL
Press MENU/OK to protect all pictures, or press
DISP/BACK to exit without changing picture
status.
RESET ALL
RESET ALL
Press MENU/OK to remove protection from all
pictures, or press DISP/BACK to exit without
changing picture status.
If the number of pictures affected is very large,
the display at right will appear in the monitor
while the operation is in progress. Press DISP/
BACK to exit before the operation is complete.
C Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 77).
R
R
CROP
CROP
To create a cropped copy of a picture, play
the picture back and select R CROP in the
playback menu.
1
Use the zoom control to zoom in and out and
use the selector to scroll the picture until the
desired portion is displayed (to exit to single-
frame playback without creating a cropped
copy, press DISP/BACK).
CANCELYES
CROP
Navigation window
shows portion of
image currently
displayed in monitor
Zoom indicator
If the size of the final copy will be t, OK
will be displayed in yellow.
69
Menus
Using the Menus: Playback Mode
B Tip: Intelligent Face Detection
If the picture was shot with
Intelligent Face Detection (pg.
24), B will be displayed in the
monitor. Press the F button
to zoom in on the selected
face.
2
Press MENU/OK. A confirmation
dialog will be displayed.
Copy size is shown at the top. Larger crops
produce larger copies; all copies have an
aspect ratio of 4 : 3.
3
Press MENU/OK to save the cropped
copy to a separate file.
j
j
RESIZE
RESIZE
To create a small copy of a picture, play the
picture back and select j RESIZE in the
playback menu.
1
Press the selector up or down
to highlight t STANDARD or
s SMALL.
2
Press MENU/OK to select the
highlighted option.
3
Press MENU/OK to copy the picture at
the selected size.
FACE CROPPING
CANCELYES
CROP
FACE CROPPING
CANCELYES
CROP
70
Using the Menus: Playback Mode
N
N
IMAGE ROTATE
IMAGE ROTATE
By default, pictures taken in tall orientation are
displayed in wide orientation. Use this option to
display pictures in the correct orientation in the
monitor. It has no effect on pictures displayed
on a computer or other device.
A Notes
Protected pictures can not be rotated. Remove
protection before rotating pictures (pg. 67).
The camera may not be able to rotate pictures
created with other devices.
To rotate a picture, play the picture back and
select N IMAGE ROTATE in the playback menu.
1
Press the selector down to
rotate the picture 90 ° clockwise,
up to rotate the picture 90 °
counterclockwise.
2
Press MENU/OK to confirm the
operation (to exit without rotating
the picture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.
71
Menus
Using the Menus: Playback Mode
P
COPY
COPY
Copy pictures between internal memory and a
memory card.
1
Press the selector up or down to
highlight d INTERNAL MEMORY
g x CARD (copy pictures from
internal memory to the memory
card) or x CARD g d INTERNAL
MEMORY (copy pictures from a
memory card to internal memory).
2
Press the selector right to display
options for the highlighted item.
3
Press the selector up or down to
highlight FRAME or ALL FRAMES.
4
Press MENU/OK.
B Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal
memory, then remove the source card, insert the
destination card, and copy the pictures from internal
memory.
FRAME
FRAME
Copy selected frames.
1
Press the selector left or right to
display the desired picture.
2
Press MENU/OK to copy the picture.
3
Repeat steps 12 to copy additional
images. Press DISP/BACK to exit
when the operation is complete.
72
Using the Menus: Playback Mode
ALL FRAMES
ALL FRAMES
Press MENU/OK to copy all pictures, or press DISP/
BACK to exit without copying pictures.
C Cautions
Copying ends when the destination is full.
DPOF print information is not copied (pg. 52).
73
Menus
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector left to
highlight a left tab.
1.3 Press the selector up or down
to select 4.
The setup menu appears.
1
/4
SET-UP
DATE/TIME
RESET
SILENT MODE
FORMAT
TIME DIFFERENCE
OFF
ENGLISH
EXIT
2
Adjust settings.
2.1 Press the selector right to
activate the setup menu.
2.2 Press the selector up or down
to highlight a menu item.
2.3 Press the selector right
to display options for the
highlighted item.
2.4 Press the selector up or down
to highlight an option.
2.5 Press MENU/OK to select the
highlighted option.
2.6 Press DISP/BACK to exit from the
menu.
74
The Setup Menu
Setup Menu Options
Setup Menu Options
Menu item
Menu item
Description
Description
Options
Options
Default
Default
1/4
1/4
e DATE/TIME
Set the camera clock.
p TIME DIFFERENCE
Set the clock to local time (pg. 76). k HOME / j LOCAL k HOME
n w
Choose a language. See page 98 ENGLISH
7 SILENT MODE
Turn off the speaker, flash, and self-timer lamp. ON / OFF OFF
s RESET
Reset all settings except Frame number, DATE/TIME,
TIME DIFFERENCE, and VIDEO SYSTEM to default values. A
confirmation dialog will be displayed, press the selector
left or right to highlight OK and press MENU/OK.
——
m FORMAT
Format internal memory or memory cards (pg. 77).
2/4
2/4
a IMAGE DISP.
Choose how long pictures are displayed after shooting
(pg. 77).
3 SEC / 1.5 SEC /
ZOOM (CONTINUOUS) / OFF
1.5 SEC
b FRAME NO.
Choose how files are named (pg. 78). CONTINUOUS / RENEW CONTINUOUS
d OPERATION VOL.
Adjust the volume of camera controls.
q (high) / m (mid) /
n (low) / EOFF (mute)
m
e SHUTTER VOLUME
Adjust the volume of the shutter sound.
f SHUTTER SOUND
Select the sound heard when the shutter is released. 2 SOUND1 / 3 SOUND2 2 SOUND1
g PLAYBACK VOLUME
Adjust the volume for movie playback (pg. 78). 7
75
Menus
The Setup Menu
Menu item
Menu item
Description
Description
Options
Options
Default
Default
3/4
3/4
g LCD BRIGHTNESS
Control the brightness of the display (pg. 79). 0
d LCD MODE
Enable or disable monitor power saving (pg. 79).
h POWER SAVE ON /
h POWER SAVE OFF
h POWER
SAVE ON
o AUTO POWER OFF
Choose the auto power off delay (pg. 79). 5 MIN / 2 MIN / OFF 2 MIN
Z DIGITAL IS
Reduces camera shake and moving-subject blur. AUTO / OFF OFF
a RED EYE REMOVAL
Remove “red-eye” effects caused by the flash. ON / OFF ON
J BLINK DETECTION
Choose whether or not a confirmation screen is displayed
when the camera detects closed eyes when taking
pictures while Intelligent Face Detection is set to ON (pg. 26).
ON / OFF ON
4/4
4/4
c DIGITAL ZOOM
Enable or disable digital zoom (pg. 80). ON / OFF OFF
l MOVIE ZOOM TYPE
Choose the zoom type when recording movies.
1 DIGITAL / 2 OPTICAL 1 DIGITAL
R SAVE ORG IMAGE
Choose whether to save unprocessed copies of pictures
taken using red-eye removal.
ON / OFF OFF
u GUIDANCE DISPLAY
Choose whether to display tool tips. ON / OFF ON
r VIDEO SYSTEM
Choose a video mode for connection to a TV (pg. 48). NTSC / PAL NTSC
76
The Setup Menu
p
p
TIME DIFFERENCE
TIME DIFFERENCE
When traveling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
1
Specify the difference between local time
and your home time zone.
1.1 Press the selector up or down
to highlight j LOCAL.
1.2 Press the selector right to
display the time difference.
1.3 Press the selector left or right
to highlight +, , hours, or
minutes; press up or down to
edit. The minimum increment
is 15 minutes.
1.4 Press MENU/OK when settings
are complete.
2
Switch between local time and your
home time zone.
To set the camera clock to local time,
highlight j LOCAL and press MENU/OK.
To set the clock to the time in your home
time zone, select k HOME. If j LOCAL
is selected, j will be displayed in the
monitor for three seconds after the camera
enters shooting mode, and the date will be
displayed in yellow.
12 / 31 / 2050
10 : 00
AM
After changing time zones, check that the
date and time are correct.
77
Menus
The Setup Menu
m
FORMAT
FORMAT
Format internal memory or a memory card. If a
memory card is inserted in the camera, x will
be displayed in the dialog shown at right and
this option will format the memory card. If no
memory card is inserted, d will be displayed
and this option will format internal memory.
Highlight OK and press MENU/OK to begin
formatting.
C Cautions
All data—including protected pictures—will be
deleted. Be sure important files have been copied to
a computer or other storage device.
Do not open the battery cover during formatting.
a
a
IMAGE DISP.
IMAGE DISP.
Choose how long pictures are displayed in the
monitor after shooting.
3 SEC: Pictures are displayed for about 3 s before
being recorded to the memory card.
1.5 SEC: Pictures are displayed for about 1.5 s
before being recorded to the memory card.
ZOOM (CONTINUOUS): Pictures are displayed until
the MENU/OK button is pressed. Pictures can be
zoomed in to check fine details.
When the picture is zoomed in, the selector
can be used to view areas of the image not
currently visible in the display.
When the picture was taken with 3 FACE
DETECTION turned on, detected face is
zoomed. When more than one face was
detected, you can move to the next face by
pressing F.
ZOOM (CONTINUOUS) is disabled in the following
case:
- A is selected in the shooting mode.
- An option other than OFF is selected for
E CONTINUOUS.
78
The Setup Menu
A Notes
Pictures taken in continuous shooting modes are
always displayed after shooting.
The colors displayed at settings of 1.5 SEC and
3 SEC may differ from those in the final picture.
b
b
FRAME NO.
FRAME NO.
New pictures are stored in
image files named using
a four-digit file number
assigned by adding one to
the last file number used.
The file number is displayed during playback as
shown at right. FRAME NO. controls whether
file numbering is reset to 0001 when a new
memory card is inserted or the current memory
card or internal memory is formatted.
CONTINUOUS: Numbering continues from the
last file number used or the first available file
number, whichever is higher. Choose this
option to reduce the number of pictures with
duplicate file names.
RENEW: Numbering is reset to 0001 after
formatting or when a new memory card is
inserted.
A Notes
If the frame number reaches 999-9999, the shutter
release will be disabled (pg. 93).
• Selecting s RESET (pg. 74) resets b FRAME
NO. to CONTINUOUS but does not reset frame
numbering.
Frame numbers for pictures taken with other
cameras may differ.
g
g
PLAYBACK VOLUME
PLAYBACK VOLUME
Press the selector up or down to choose volume
for movie playback and press MENU/OK to select.
100-0001
100-0001
Frame number
File
number
Directory
number
100-0001
100-0001
Frame number
File
number
Directory
number
79
Menus
The Setup Menu
g
g
LCD BRIGHTNESS
LCD BRIGHTNESS
Press the selector up or down to choose display
brightness and press MENU/OK to select.
A Note
When using any shooting mode other than P mode,
the camera automatically adjusts LCD brightness,
therefore LCD BRIGHTNESS is not available.
d
d
LCD MODE
LCD MODE
If h POWER SAVE ON is selected, the monitor
will dim to save power if no operations are
performed for several seconds. Full brightness
can be restored by pressing the shutter button
halfway. The monitor does not dim in movie
mode or during playback.
o
o
AUTO POWER OFF
AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
turned off manually. Note that regardless of the
option selected, the camera will not turn off
automatically when connected to a printer (pg.
49) or computer (pg. 54) or when a slide show is
in progress (pg. 66).
B Tip: Reactivating the Camera
To reactivate the camera after it has turned off
automatically, use the n button or press the D
button for about a second (pg. 11).
A Note
Although OFF is selected for o AUTO POWER OFF,
the camera will turn off automatically if no operations
are performed for five minutes in the following case:
STANDBY is displayed in A.
B is displayed in the shooting mode.
80
The Setup Menu
c
c
DIGITAL ZOOM
DIGITAL ZOOM
If ON is selected, selecting A at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and select B.
Zoom
indicator
Zoom indicator,
DIGITAL ZOOM on
Zoom indicator,
DIGITAL ZOOM off
BBAA
Digital
zoom
Optical zoomOptical zoom
C Caution
Digital zoom produces lower quality images than
optical zoom.
81
Technical Notes
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
* Available from third-party suppliers.
Computer Related
Computer Related
Computer*
USB
SD card slot or card reader
Audio/Visual
Audio/Visual
TV*
Audio/visual
output
Printer*
Printing
Printing
PictBridge-compatible printer*
USB
HDMI
cable*
HDTV*
SD/SDHC
memory card
HD player
82
Optional Accessories
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the
accessories available in your region, check with your local FUJIFILM representative or visit http://www.
fujifilm.com/products/digital_cameras/index.html.
Rechargeable
Li-ion battery
NP-45/
NP-45A (supplied)
Additional NP-45 large-capacity batteries can be
purchased as required.
A/V cable AV-C1 Connects the camera and a TV.
HD player HDP-L1 Still pictures and movies in SD card can be
viewed by HDTV (requires HDMI cable, available
from third-party suppliers).
83
Technical Notes
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
Storage and Use
If the camera will not be used for an extended
period, remove the battery and memory card. Do
not store or use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
exposed to direct sunlight or very high
temperatures, such as in a closed vehicle on a
sunny day
• extremely cold
subject to strong vibration
exposed to strong magnetic fields, such as
near a broadcasting antenna, power line, radar
emitter, motor, transformer, or magnet
in contact with volatile chemicals such as
pesticides
next to rubber or vinyl products
Water and Sand
Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Condensation
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If
this occurs, turn the camera off and wait an hour
before turning it on again. If condensation forms
on the memory card, remove the card and wait
for the condensation to dissipate.
Cleaning
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning
paper to which a small amount of lens-cleaning
fluid has been applied. Care should be taken to
avoid scratching the lens or monitor. The camera
body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile
chemicals.
Traveling
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
84
Troubleshooting
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Power
supply
The camera does
not turn on.
The battery is exhausted. Insert a fresh or fully-charged spare battery. 5, 13
The battery is not in the correct
orientation.
Re-insert the battery in the correct
orientation.
6
The battery-chamber cover is not latched. Latch the battery-chamber cover. 7
The battery runs
down quickly.
The battery is cold.
Warm the battery by placing it in a pocket
or other warm place and re-insert it in the
camera immediately before taking a picture.
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The camera is in SRC mode.
Select another shooting mode. 19
The battery has been charged many times.
The battery has reached the end of its
charging life. Purchase a new battery.
X TRACKING is selected for F AF
MODE.
Select w CENTER for F AF MODE.
64
The camera turns
off suddenly.
The battery is exhausted. Insert a fresh or fully-charged spare battery. 5, 13
Battery
charger
Charging does
not start.
The battery is not correctly inserted. Re-insert the battery in the charger. 5
The battery is not in the correct
orientation.
Re-insert the battery in the correct
orientation.
5
Charging is slow. The temperature is low. Charge the battery at room temperature.
The charging
lamp lights, but
the battery does
not charge.
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The battery has been charged many times.
The battery has reached the end of its
charging life. Purchase a new battery. If
the battery still fails to charge, contact your
FUJIFILM dealer.
The charger is not correctly plugged into a
power outlet.
Plug the charger correctly into the power
outlet.
85
Troubleshooting
Troubleshooting
Menus and Displays
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Menus and displays are
not in English.
English is not selected for the
n w option in the setup menu.
Select ENGLISH.12, 74
Shooting
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Taking
pictures
No picture is
taken when the
shutter button is
pressed.
Memory is full. Insert a new memory card or delete pictures. 8, 43
Memory is not formatted. Format the memory card or internal memory. 77
There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth.
The memory card is damaged. Insert a new memory card. 8
The battery is exhausted. Insert a fresh or fully-charged spare battery. 6
The camera has turned off automatically. Turn the camera on. 11
The monitor
goes dark after
shooting.
The flash has fired.
The monitor may darken while the flash
charges. Wait for the flash to charge.
32
Focus
The camera does
not focus.
The subject is close to the camera. Select macro mode.
31
The subject is far away from the camera. Cancel macro mode.
The subject is not suited to autofocus. Use focus lock. 27
86
Troubleshooting
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Intelligent
Face
Detection
Face detection
not available.
Intelligent Face Detection is not available
in the current shooting mode.
Choose a different shooting mode. 19
No face is
detected.
The subject’s face is obscured by
sunglasses, a hat, long hair, or other objects.
Remove the obstructions.
24
The subject’s face occupies only a small
area of the frame.
Change the composition so that the subject’s
face occupies a larger area of the frame.
The subject’s head is at an angle or the
subject is not facing the camera.
Ask the subject to face the camera and hold
their head straight.
The camera is tilted. Hold the camera straight. 15
The subject’s face is poorly lit. Shoot in bright light.
Wrong subject
selected.
The selected subject is closer to the center
of the frame than the main subject.
Recompose the picture or turn face detection
off and frame the picture using focus lock.
24, 27
Close-ups
Macro mode is
not available.
Macro mode is not available in the current
shooting mode.
Choose a different shooting mode. 19
Flash
The flash does
not fire.
The flash is charging. Wait for the flash to charge. 32
The flash is not available in the current
shooting mode.
Choose a different shooting mode. 19
The battery is exhausted. Insert a fresh or fully-charged spare battery. 6
An option other than OFF is selected for
E CONTINUOUS.
Turn E CONTINUOUS off.
64
Flash mode not
available.
The desired flash mode is not available in
the current shooting mode.
Choose a different shooting mode. 19
The camera is in silent mode. Turn silent mode off. 33
The flash does
not fully light the
subject.
The subject is not in range of the flash. Position the subject in range of the flash. 98
The flash window is obstructed. Hold the camera correctly. 15
87
Troubleshooting
Troubleshooting
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Problem
images
Pictures are
blurred.
The lens is dirty. Clean the lens. 83
The lens is blocked. Keep objects away from the lens. 15
R is displayed during shooting and the
focus frame is displayed in red.
Check focus before shooting. 16, 91
0 is displayed during shooting. Use the flash or a tripod. 32
Pictures are
mottled.
The ambient temperature is high and the
subject is poorly lit.
This is normal and does not indicate a
malfunction. Choose a lower sensitivity.
62
Vertical lines
appear in
pictures.
The camera has been used continuously at
high temperatures.
Turn the camera off and wait for it to cool
down.
Smear appears in
pictures.
The sun or another bright object was in
the frame.
White or purple vertical lines may appear
when a very bright object is framed in the
display. This is normal and does not indicate
a malfunction. Smear is not recorded in
photographs but may appear in movies. If
possible, avoid shooting movies with bright
objects in or close to the frame.
43
88
Troubleshooting
Playback
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Pictures
Pictures are
grainy.
The pictures were taken with a different make
or model of camera.
——
Playback zoom
unavailable.
The pictures were taken at an image size of
t or with a different make or model of
camera.
——
Pictures were saved or cropped at the size of
t, or copies created with j RESIZE.
——
Audio
No sound
in movie
playback.
The camera is in silent mode. Turn silent mode off. 33
Playback volume is too low. Adjust playback volume. 78
The microphone was obstructed. Hold the camera correctly during recording. 45
The speaker is obstructed. Hold the camera correctly during playback. 47
Deletion
Selected
pictures are
not deleted.
Some of the pictures selected for deletion are
protected.
Remove protection using the device with
which it was originally applied.
67
Frame no.
File numbering
is unexpectedly
reset.
The battery-chamber cover was opened while
the camera was on.
Turn the camera off before opening the
battery-chamber cover.
6, 78
89
Troubleshooting
Troubleshooting
Connections
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
TV
Monitor is off. The camera is connected to a TV. View pictures on the TV. 48
No picture or
sound.
The camera is not properly connected. Connect the camera correctly. 48
An A/V cable was connected during movie
playback.
Connect the camera once movie playback
has ended.
47, 48
Input on the television is set to “TV.” Set input to “VIDEO.”
The camera is not set to the correct video
standard.
Match the camera r VIDEO SYSTEM
setting to the TV.
75
The volume on the television is too low. Adjust the volume.
No color.
The camera is not set to the correct video
standard.
Match the camera r VIDEO SYSTEM
setting to the TV.
75
Computer
The computer
does not
recognize the
camera.
The camera is not properly connected. Connect the camera correctly. 58
PictBridge
Pictures can
not be printed.
The camera is not properly connected. Connect the camera correctly. 49
The printer is off. Turn the printer on.
Only one copy
is printed.
The printer is not PictBridge-compatible.
The date is not
printed.
90
Troubleshooting
Miscellaneous
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
Nothing happens
when the shutter
button is pressed.
Temporary camera malfunction.
Remove and reinsert the battery or
disconnect and reconnect the AC adapter/
DC coupler.
6
The battery is exhausted. Insert a fresh or fully-charged spare battery. 6
The camera does not
function as expected.
Temporary camera malfunction.
Remove and reinsert the battery or
disconnect and reconnect the AC adapter/
DC coupler. If the problem persists, contact
your FUJIFILM dealer.
6
91
Troubleshooting
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
Warning
Description
Description
Solution
Solution
O (red) The battery is low.
Insert a fresh or fully-charged spare battery.
N (blinks red) The battery is exhausted.
0
Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.
R
(displayed in red
with red focus frame)
The camera can not focus.
Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 27).
If the subject is poorly lit, try focusing at a distance of
about 2 m (6.6 ft.).
Use macro mode to focus when taking close-ups.
Aperture or shutter
speed shown in red
The subject is too bright or too dark. The
picture will be over- or under-exposed.
If the subject is dark, use the flash.
BLINK DETECTED A subject or subjects may have blinked. Retake the photograph if desired.
FOCUS ERROR
TURN OFF THE CAMERA
AND TURN ON AGAIN
Camera malfunction.
Turn the camera off and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer.
The lens barrel is touched.
NO CARD
No memory card inserted when P COPY is
selected in the playback menu.
Insert a memory card.
CARD NOT INITIALIZED
The memory card or internal memory is not
formatted or the memory card was formatted
in a computer or other device.
Format the memory card or internal memory using
the m FORMAT option in the camera setup menu
(pg. 77).
The memory card contacts require cleaning.
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg. 77).
If the message persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer.
PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 8).
BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 77).
92
Warning Messages and Displays
Warning
Warning
Description
Description
Solution
Solution
CARD ERROR
The memory card is not formatted for use in
the camera.
Format the memory card (pg. 77).
The memory card contacts require cleaning or
the memory card is damaged.
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg. 77).
If the message persists, replace the memory card.
Incompatible memory card. Use a compatible memory card.
Camera malfunction. Contact a FUJIFILM dealer.
x MEMORY FULL
The memory card or internal memory is full;
pictures can not be recorded or copied.
Delete pictures or insert a memory card with more
free space.
d MEMORY FULL
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
WRITE ERROR
Not enough memory remaining to record
additional pictures.
Delete pictures or insert a memory card with more
free space.
The memory card or internal memory is not
formatted.
Format the memory card or internal memory (pg. 77).
Memory card error or connection error.
Re-insert the memory card or turn the camera off
and then on again. If the message persists, contact a
FUJIFILM dealer.
READ ERROR
The file is corrupt or was not created with the
camera.
The file can not be played back.
The memory card contacts require cleaning.
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg. 77).
If the message persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer.
93
Troubleshooting
Warning Messages and Displays
Warning
Warning
Description
Description
Solution
Solution
FRAME NO. FULL
The camera has run out of frame numbers
(current frame number is 999-9999).
Format the memory card and select RENEW for the
b FRAME NO. option in the G SET-UP menu.
Take a picture to reset frame numbering to 100-0001,
then return to the b FRAME NO. menu and select
CONTINUOUS.
TOO MANY FRAMES
An attempt was made to execute IMAGE
SEARCH over too many pictures.
IMAGE SEARCH cannot process 5,000 pictures or
more.
CAN NOT EXECUTE
Red-eye removal can not be applied to the
selected picture or movie.
A CAN NOT EXECUTE
PROTECTED FRAME
An attempt was made to delete or rotate a
protected picture.
Remove protection before deleting or rotating
pictures.
x NO IMAGE
The source device selected in the playback
P COPY menu contains no pictures.
Select a different source.
d NO IMAGE
t CAN NOT CROP An attempt was made to crop a t picture.
These pictures can not be cropped.
s CAN NOT CROP An attempt was made to crop a s picture.
CAN NOT CROP
The picture selected for cropping is damaged
or was not created with the camera.
t CANNOT EXECUTE An attempt was made to resize a t picture.
These pictures can not be resized.
s CANNOT EXECUTE An attempt was made to resize a s picture.
DPOF FILE ERROR
The DPOF print order on the current memory
card contains more than 999 images.
Copy the pictures to internal memory and create a
new print order.
CAN NOT SET DPOF The picture can not be printed using DPOF.
A CAN NOT SET DPOF Movies can not be printed using DPOF.
CAN NOT ROTATE The picture is protected. Remove protection before rotating pictures (pg. 67).
A CAN NOT ROTATE Movies can not be rotated.
94
Warning Messages and Displays
Warning
Warning
Description
Description
Solution
Solution
PRESS AND HOLD
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
An attempt was made to choose a flash mode
or adjust the volume with the camera in silent
mode.
Exit silent mode before choosing a flash mode or
adjusting the volume.
COMMUNICATION ERROR
A connection error occurred while pictures
were being printed or copied to a computer or
other device.
Confirm that the device is turned on and that the USB
cable is connected.
PRINTER ERROR
Printer out of paper or ink, or other printer
error.
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
PRINTER ERROR
RESUME?
Check printer (see printer manual for details). If
printing does not resume automatically, press MENU/OK
to resume.
CAN NOT BE PRINTED
An attempt was made to print a movie, a
picture not created with the camera, or a
picture in a format not supported by the
printer.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to confirm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
95
Appendix
Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details
visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”
stored in internal memory or on a memory card. The information in the order includes the pictures to
be printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering
the camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction
during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the
compression rate, the greater the loss of information and more noticeable drop in quality when the picture is
displayed.
Motion JPEG: An AVI (Audio Video Interleave) format that stores sound and JPEG images in a single file. Motion
JPEG files can be played in Windows Media Player (requires DirectX 8.0 or later) or QuickTime 3.0 or later.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources,
such as the sun or reflected sunlight, appear in the frame.
WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This
process is known as “white balance.”
96
Internal Memory and Memory Card Capacity/Recording Time
The following table provides estimates of the recording time or the number of available frames
at different image qualities. All figures are approximate; file size varies with the scene recorded,
producing wide variations in the number of files that can be stored. The number of exposures or
length remaining may not diminish at an even rate. You can take a few pictures for trial without a
memory card.
FinePix JX280 Series / JX180 Series
FinePix JX280 Series / JX180 Series
Storage media
Storage media
o
o
Internal memory
Internal memory
(approx. 24 MB)
(approx. 24 MB)
4 GB
4 GB
8 GB
8 GB
T
T
Image Quality
Image Quality
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
Still Images
Still Images
i
i
3 6 550 109 0 1110 2180
y
y
3:2
3:2
37630122012702440
r
r
16:9
16:9 48750143015002870
7
7
6 13 1090 2060 2180 4130
n
n
14 24 2350 3900 4700 7800
m
m
16:9
16:9 21 31 3430 4960 6870 9920
m
m
23 33 3700 5270 7400 10550
t
t
94 126 14620 19430 29250 38860
Movie
Movie
1
1
)
)
2
2
5 sec. 17 min. 35 min.
!
!
18 sec. 54 min. 108 min.
9
9
40 sec. 114 min. 228 min.
1
• Recording times shown here are the approximate total time of all recorded movies.
• Movie recording stops automatically when the movie reaches 2 GB in size or 15 minutes in length.
2
Use a card with a class 4 write speed (4 MB/s) or better when shooting HD movies.
97
Appendix
Specifications
System
Model Fine
Pix JX280 Series / JX180 Series
Effective pixels 14.1 million
CCD ½
.3 -in., square-pixel CCD with primary color filter
Storage media Internal memory (approx. 24 MB) SD/SDHC memory cards (see page 8)
File system Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order Format
(DPOF)
File format Still pictures: Exif 2.3 JPEG (compressed) Movies: AVI-format Motion JPEG
Image size (pixels)
i 4,288 × 3,216 y
3:2
4,288 × 2,864
r
16:9
4,288 × 2,416
7 3,072 × 2,304
n 2,048 × 1,536 m
16:9
1,920 × 1,080 m 1,600 × 1,200 t 640 × 480
Lens
Focal length
FinePix JX280 Series
Fujinon 5 × optical zoom lens, F3.6 (wide angle) – F5.9 (telephoto)
f=5.0 mm–25.0 mm (35-mm format equivalent: 28 mm–140 mm)
FinePix JX180 Series
Fujinon 4 × optical zoom lens, F3.6 (wide angle) – F5.4 (telephoto)
f=5.0 mm–20.0 mm (35-mm format equivalent: 28 mm–112 mm)
Digital zoom FinePix JX280 Series
Approx. 6.7 × (up to 33.5 × when combined with optical zoom)
FinePix JX180 Series
Approx. 6.7 × (up to 26.8 × when combined with optical zoom)
Aperture FinePix JX280 Series
F3.6/F8.0 (wide angle), F5.9/F13.0 (telephoto), uses Neutral Density (ND) filter
FinePix JX180 Series
F3.6/F8.0 (wide angle), F5.4/F13.0 (telephoto), uses Neutral Density (ND) filter
Focus range (distance from
front of lens)
Approx. 45 cm (1.5 ft.)–infinity (wide angle); 80 cm (2.6 ft.)–infinity (telephoto)
Macro: approx. 10
cm–80
cm/3.9
in.–2.6
ft. (wide angle); 60
cm–100
cm/2.0
ft.3.3
ft. (telephoto)
Sensitivity Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200*, AUTO
* max. number of recorded pixels: n
Metering 256-segment through-the-lens (TTL) metering
Exposure control Programmed autoexposure
98
Specifications
System
Exposure compensation 2 EV – +2 EV in increments of
1
/
3 EV (P)
Scene modes
A
(NATURAL AND FLASH LIGHTING),
B
(NATURAL LIGHT),
U
(PORTRAIT),
d
(BABY),
2
(SMILE&SHOOT),
K (LANDSCAPE), N (MOTION PANORAMA), L (SPORT), D (NIGHT), U (NIGHT (TRIPOD)),
W (FIREWORKS), E (SUNSET), F (SNOW), G (BEACH), I (PARTY), O (FLOWER), P (TEXT)
Image stabilization Available
Intelligent Face Detection Available
Shutter speed ¼ s–
1
/
1,400 s (AUTO mode); 8 s–
1
/
1,400 s (other modes); combined mechanical and electronic shutter
Continuous Up to 1.2 fps; max. 3 frames
Focus Mode: Center AF, Tracking AF (P/AUTO)
Autofocus system: Contrast-detect TTL AF
White balance Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent
Self-timer Off, 2 sec., 10 sec.
Flash Auto flash; effective range when sensitivity is set to AUTO is approx. 40 cm–3.0 m/1.3 ft.–9.8 ft. (wide
angle), 80 cm–2.0 m/2.6 ft.–6.6 ft. (telephoto), 30 cm–80 cm/1.0 ft.–2.6 ft. (macro)
Flash modes Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash with
red-eye removal, off, slow synchro with red-eye removal (red-eye removal on)
Monitor 2.7-in., 230k-dot color LCD monitor
Frame coverage Approx. 96%
Movies Frame size 1,280 × 720, 640 × 480 or 320 × 240 pixels; 30 fps; monaural sound
Shooting options Scene recognition, Intelligent Face Detection with red-eye removal, framing guideline (best
framing), frame number memory, blink detection, auto LCD brightness
Playback options Intelligent Face Detection, red-eye removal, micro thumbnail, multi-frame playback, image search,
crop, resize, slide show, image rotation, photobook assist, I favorites
Other options
PictBridge, Exif Print, language selection (Japanese / English / French / German / Spanish / Italian /
Simplified Chinese / Korean / Dutch / Portuguese / Russian / Thai / Turkish / Traditional Chinese /
Czech / Hungarian / Polish / Swedish / Slovak / Danish / Norwegian / Finnish / Arabic / Farsi / Greek /
Lithuanian / Ukraine/ Hebrew / Indonesian / Romanian / Vietnamese), time difference, silent mode
99
Appendix
Specifications
Input/output terminals
A/V OUT (audio/video output) N
TSC or PAL with monaural sound
Digital input/output USB 2.0 High Speed; shares A/V OUT connector
Power supply/other
Power supply NP
-45A rechargeable battery
Guide to the number of
available frames for battery
operation
Battery Type NP-45A Number of frames (AUTO mode) Approx. 180 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be SD
memory card.
Note that the number of shots that can be taken with a fully-charged battery varies with
temperature and shooting conditions.
Camera dimensions
(W × H × D)
93.0 mm × 55.0 mm × 22.9 (18.5*) mm/3.7 in. × 2.2 in. × 0.9 (0.7*) in.,
* excluding projecting parts, measured at the thinnest part
Camera weight Approx. 113 g/4.0 oz., excluding batteries, accessories, and memory cards
Shooting weight Approx. 130 g/4.6 oz., including batteries and memory card
Operating conditions Temperature: 0 °C to +40 °C (+32 °F to +104 °F)
85% humidity or less (no condensation)
NP-45A rechargeable battery
Nominal voltage DC 3.7 V
Nominal capacity 720 mAh
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.6 in. × 0.2 in.
Weight Approx. 15 g/0.5 oz.
100
Specifications
BC-45B battery charger
Rated input 100 V–240 V AC, 50/60 Hz
Input capacity 6.0 VA (100 V / 240 V)
Rated output 4.2 V DC, 550 mA
Supported batteries NP-45A rechargeable batteries
Charging time Approx. 110 minutes (25 °C / 77 °F)
Dimensions (W × H × D) 91 mm × 46 mm × 23 mm/3.6 in. × 1.8 in. × 0.9 in.
Weight Approx. 65 g/2.3 oz., excluding battery
Operating temperature 0 °C – +40 °C/+32 °F – +104 °F
The weight and dimensions vary with the country or region of sale.
101
Appendix
Specifications
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Notices
Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static
electricity, or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fuji FINEPIX JX280 series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info