Bedienungsanleitung Fujifilm Finepix 1300 (Seite 34 von 41) (Englisch)

101060

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

6766

●

Soiling such as fingerprints on the battery terminals can

markedly reduce the number of available shots. Carefully

wipe the battery terminals clean with a soft dry cloth before

loading the batteries.

If any liquid at all leaks from the batteries, wipe the battery

compartment thoroughly and then load new batteries.

f any battery fluid comes into contact with your hands or

clothing, flush the area thoroughly with water. Note that

battery fluid can cause loss of eyesight if it gets in your

eyes. If this occurs, do not rub your eyes. Flush the fluid out

with clean water and contact your physician for treatment.

■ Disposing of Batteries

When disposing of batteries, do so in accordance with your

local waste disposal regulations.

■ Notes on Small Rechargeable Batteries (Ni-MH

or Ni-Cd batteries)

● Always use the special battery charger to charge AA-size

Ni-MH or Ni-Cd batteries. Charge the batteries as

described in the instructions provided with the battery

charger.

● Do not use the battery charger to charge batteries other

than those specified for use with the charger.

● Note that the batteries may feel warm immediately after

being charged.

● Ni-MH and Ni-Cd batteries are not charged at shipment.

Be sure to charge the batteries before using them.

● The camera mechanism is such that it draws a minute

amount of current even when the camera is switched off.

Always use the AC-5V AC Power Adapter AC-5V/AC-5VH

(sold separately) with the FinePix1300 Digital Camera.

The use of an AC power adapter other than the AC-5V/AC-

5VH could result in damage to your camera.

● Ensure that you do not touch the contact areas on the

AC power adapter against any other metal object as this

could cause a short circuit.

● Do not plug the AC power adapter into the DIGITAL

socket as this could damage your camera.

● Do not plug in the AC power adapter while you are

operating the camera using batteries. Switch the camera

off first.

● Do not load the batteries while you are operating the

camera using the AC power adapter. Switch the camera

off first.

● If you disconnect the AC power adapter when there are

no batteries in the camera, the date may be cleared. If

this occurs, reset the date.

Notes on Using the AC Power Adapter

Take particular care not to leave Ni-MH or Ni-Cd

batteries in the camera for a long period of time as they

can become excessively discharged and no longer be

usable even when charged.

● Ni-MH and Ni-Cd batteries self-discharge even when not

used. Always charge Ni-MH and Ni-Cd batteries before

using them. If the time for which a battery provides power

shortens markedly when it has been correctly charged,

this indicates that the battery has reached the end of its

effective life and should be replaced.

● AA-size alkaline, Ni-MH (nickel metal hydride), or Ni-Cd

batteries can be used with this camera.

Do not use AA-size manganese or lithium batteries in

your FinePix1300 because the heat generated by the

batteries could damage the camera or cause

malfunctions.

● Because different brands of alkaline batteries have

different capacities, the life of some batteries (the length

of time for which they can be used) may be considerably

shorter than that of the alkaline batteries supplied with

this camera.

● Do not use batteries that are leaking, deformed,

discolored or exhibit any other obvious abnormality.

● Do not store batteries in very warm or moist locations.

● Keep the batteries out of the reach of babies and small

children.

●

When loading the batteries in the camera, ensure that the

battery polarity (

and

) is as indicated on the camera.

● Do not use new batteries together with used batteries. In

the case of rechargeable batteries, do not use charged

and discharged batteries together. Do not use batteries

of different types or brands together.

● If you do not intend to use the camera for a long period of

time, remove the batteries from the camera. (Note that if

the camera is left with the batteries removed, the time

and date settings are cleared.)

● The batteries may feel warm immediately after being

used. Before removing the batteries, switch the camera

off and wait until the batteries cool down.

●

When replacing the batteries, always fit 4 new batteries.

Here, 'new batteries' refers to either recently purchased

unused alkaline batteries, or Ni-Cd or Ni-MH (nickel metal

hydride) batteries that have recently been fully recharged

together.

●

Battery performance deteriorates at low temperatures

(+10°C or below) and the time for which they can be used

shortens. This is particularly true of alkaline batteries. In cold

conditions, put the batteries in your pocket or a similar place

to warm them before loading them into the camera. If you

use a body warmer to warm the batteries, ensure that they

are not in direct contact with the warmer.

Applicable Batteries

Notes on the Power Supply

Incorrect use of the batteries could cause them to leak,

become hot, ignite or burst. Always observe the

precautions given below.

● Do not heat the batteries or throw them into a fire.

● Do not carry or store a battery with metal objects such as

necklaces or hairpins that could come into contact with

the metal positive 5and negative 4 poles of the battery.

● Do not expose the batteries to fresh or sea water, and

take particular care to keep the terminals dry.

● Do not attempt to deform, disassemble or modify the

batteries.

● Do not attempt to peel off or cut the battery casing.

● Do not drop, strike or otherwise subject the batteries to

strong impacts.

Notes on the Batteries

Fujifilm Finepix 1300 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info