Bedienungsanleitung Fujifilm Finepix 2300 (Seite 7 von 41) (Englisch)

101064

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

SELECTING THE POWER SUPPLY

Slide the battery cover in the direction of the

arrow and open the cover.

●

Soiling such as fingerprints on the battery terminals

can markedly reduce the number of available shots

(➡P.67).

●

Do not use new and used batteries together.

●

Always switch the camera off when replacing the

batteries. If the camera is left on, the camera

settings may revert to the factory default settings.

●

The Quick Battery Charger (sold separately) is needed

to recharge AA-size Ni-MH or Ni-Cd batteries (➡P.62).

●

Once the AC power adapter has been connected or

the batteries have been loaded for 10 minutes or

more, the settings will be retained for roughly 20

minutes even if you remove the batteries and

disconnect the AC power adapter. Check settings such

as the date and time after you replace the batteries.

➀

Install the batteries with the correct polarity as

shown.

➁

Close the battery cover as indicated by the

arrow.

Using the AC Power Adapter

(

sold separately

)

To shoot or play back images without depleting

the battery charge, use the special AC Power

Adapter AC-5VH/AC-5V.

Check that the camera is switched off and then

plug the AC power adapter connector into the

“DC IN 5V socket” on the camera. Then plug the

AC power adapter into the power outlet.

●

You cannot charge the batteries by connecting the

AC power adapter.

●

The shapes of the plug and socket-outlet depends

on the country of use.

●

Using AC power adapters other than the AC-5VH/AC-5V

could damage the camera.

●

See P.67 for more information on the AC power adapter.

DC IN 5V socket

➀

➁

Use 4 AA-size alkaline, Ni-MH or Ni-Cd batteries.

Do not use different types of batteries together.

■

Number of available shots (✽ with fully charged batteries)

The table below provides a guide to the number of shots that

can be taken at normal temperature with 50% flash use.

Note that these figures may vary depending on the camera’s

ambient temperature and the level of battery charge.

◆ Important Battery Information ◆

● Because different brands of alkaline batteries have

different capacities, the life of some batteries (the length

of time for which they can be used) may be considerably

shorter than that of the alkaline batteries supplied with

this camera.

● It is a characteristic of alkaline batteries in particular that

the life of the battery is shorter at low temperatures

(+10°C or below).

● Do not use lithium or manganese batteries in your

FinePix2300 because the heat generated by the

batteries could damage the camera.

With LCD monitor

OFF

With LCD monitor

Battery type

Ni-MH battery

HR-3UF

Alkaline batteries

Ni-Cd battery

KR-3UF

Approx.240 frames

✽

Approx.240 frames

Approx.130 frames

✽

Approx.730 frames

✽

Approx.730 frames

Approx.400 frames

✽

●

Do not use excessive force on the battery cover.

●

Take care not to drop the batteries when you open

or close the battery cover.

Using Batteries

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix 2300 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info