101066
34
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
66
6
67
CONNECTING AT PC-CAMERA MODE
PC
(USB)
socket
(USB)
socket
DC IN 3V
socket
Camera
2
1Open the lens cover.
2Slide the Power switch sideways to switch the
camera on.
3Set the USB MODE setting in the SETUP
menu to PC CAM (P.58).
4Slide the Power switch sideways to switch the
camera off.
1Switch your computer on.
2Use the special USB cable to connect the camera to
your computer.
3Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera (P.68).
If you are connecting your camera to a Windows PC
for the first time, the Add New Hardware Wizard
window opens and driver software installation
begins (Software Quick Start Guide booklet).
!
You should use the AC power adapter when the camera
is connected to your computer (P.21). Loss of power
during data transmission can prevent successful data
downloading.
!
Ensure that you insert the USB cable plugs into the
correct sockets.
!
Push the cable plugs firmly into the connector sockets.
!
Do not close the lens cover while the camera and
PC are communicating. If you close the lens cover,
the
¥ warning is displayed and
communication is interrupted.
!
Do not disconnect the USB cable when the camera
is communicating with the computer. See P.68 for
information on the disconnection procedure.
i The viewfinder lamp alternately blinks green
and orange while the camera is communicating
with your computer.
i The lens is fixed at the wide-angle zoom setting.
i PC CAM appears on the LCD monitor.
i Power Save/Auto Power Off does not function
when a USB connection is being used.
i FinePixViewer automatically starts up and the
Picture Hello window opens (Windows only).
i
You can use software
such as VideoImpression
to view live images.
Camera Operation Computer Operation
Screen for Windows 98 SE
Macintosh screen
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your computer. Refer to the Software
Quick Start Guide booklet and complete the
required computer setup procedures. Then
reconnect the camera to your computer.
1
01 02
03
04
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujifilm Finepix 2600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info