101068
34
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
66
6
67
DSC
(
Mass storage device
)
Mode
The first time you connect the camera to your computer
PC Connection describes how to set up a USB connection and provides an overview of the functions
available using a USB connection. Refer also to the Software Quick Start Guide booklet.
This mode provides a simple way to read
images from a SmartMedia and store images on
to a SmartMedia (P.68).
You must install all the software before
connecting the camera to your computer.
Refer to the Software Quick Start Guide booklet
also.
IN PC
(
PERSONAL COMPUTER
)
CONNECTION
6
PC Connection
POWER SAVE
SET–UP
Once you enable this function, the screen is
temporarily switched off to save power if you do
not use the camera for 30 seconds. Use this
function to gain the maximum possible run time
from your batteries.
!
The charging time for the flash increases slightly
because the flash charging power is reduced.
When the Power Save function is operating,
press the shutter button down halfway to return
the camera to the ready-to-shoot status. This is
a useful feature as it allows you to take pictures
more quickly than switching the camera off and
then on again.
!
When the Power Save function is operating,
pressing the shutter button down fully returns the
camera to the ready-to-shoot status and takes the
picture.
!
The camera does not automatically switch off when
a USB connection is being used.
!
Operation can also be restored by pressing buttons
other than the shutter button.
Though the Power Save function does not
operate while you are setting the file size or
when the camera is in SETUP or Playback
mode, the camera still switches off automatically
if the camera controls are not used for 2
minutes.
PC-CAM
(
camera
)
Mode
This function allows you to conduct
videoconferencing sessions between PCs
connected to the Internet. This function can also
be used to record video on a PC (P.70).
!
Videoconferencing (PictureHello) is not
supported on Macintosh computers.
!
The PC Camera function cannot be used on Mac OS
X (including the Classic environment). Use a Mac
OS version between 8.6 and 9.2.
CD-ROM
(Software for FinePix)
Software Quick Start Guide
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujifilm Finepix 2800 ZOOM wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info