Bedienungsanleitung Fujifilm Finepix A 201 (Seite 29 von 44) (Englisch)

101427

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

56 57

POWER SAVE

SET–UP

hPower saving “ON” (default setting)

Power consumption is kept to a minimum to

prevent battery depletion. You should select the

“ON” setting when you are using alkaline

batteries.

iIf the camera is not used for approximately 30

seconds, the LCD switches off temporarily to reduce

power consumption (Sleep mode).

iOnce the camera is in Sleep mode, if it is left

unused for a further 90 seconds, it is automatically

switched off.

iThe charging time for the flash increases slightly

because the flash charging power is reduced.

hPower saving “OFF”

Batteries are more likely to run flat since no

power reduction measures (sleep mode, etc.)

are used. However, this function automatically

switches the camera off if the camera is not

used for approximately 2 minutes.

To bring the camera out of sleep mode so that it

is ready to shoot, press “d”, “c”, “a” or “b”.

This is useful since the camera is ready to shoot

more quickly than when it is switched off and

then on again. You can also take pictures when

the camera is in sleep mode simply by pressing

the shutter button.

●

Power Save/Auto Power Off does not function when a

USB connection is being used.

●

You can also bring the camera out of sleep mode by

pressing buttons other than “d”, “c”, “a” or “b”.

The Sleep function does not operate when the

LCD monitor is switched off, while you are

setting the file size or when the camera is in

SET–UP or Playback mode. However, if the

camera controls are not used for 2 minutes, the

camera automatically switches off.

DSC

(

Mass storage device

)

Mode

PC Connection describes how to set up a USB connection and provides an overview of the functions

available using a USB connection. Refer also to the Software Quick Start Guide booklet.

This mode provides a simple way to read images

from a SmartMedia and store images on to a

SmartMedia (➡P.58).

PC-CAM

(

camera

)

Mode

This function allows you to conduct videoconferencing

sessions between PCs connected to the Internet.

This function can also be used to record video on a

PC (➡P.60).

●

Videoconferencing is not available for Macintosh

computers.

IN PC CONNECTION

PC Connection

◆

The First Time You Connect Your Camera to a Computer

◆

You must set up your computer as described below. Refer also to the Software Quick Start Guide

booklet.

Windows

1Load the enclosed CD-ROM into your PC

’

s CD-ROM drive and install the application software.

2With the CD-ROM loaded into your PC, select DSC connection mode and install the driver software.

3With the CD-ROM loaded into your PC, select PC CAMERA connection mode and install the driver

software.

Macintosh

Load the enclosed CD-ROM into the CD-ROM drive and install all the software.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix A 201 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix A 201

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info