Bedienungsanleitung Fujifilm Finepix A 204 (Seite 9 von 64) (Englisch)

101431

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

16 17

To change the date display format

◆

Power Save Function

◆

If the camera is not used for 2 minutes, this

function automatically switches it off.

When this function is enabled, the LCD monitor

switches off to conserve battery power if the

camera is not used in any way for 30 seconds

(See P.70 for details).

◆

Checking the remaining battery charge

◆

Switch the camera on and check that no battery

level warning (

Z or X) is displayed on the

LCD monitor. If no icon indicating the remaining

battery charge is displayed, the battery has

ample charge.

Z Lit red:

Battery charge low. Replace or recharge the

battery as it will run out shortly.

X Blinking red:

The battery is exhausted. The display will shortly

go blank and the camera will stop working.

Replace or recharge the battery.

●

The above estimates are for the Still photography

modes. In Playback mode, the transition from “

Z”

to “

X” may take less time.

１／１／２００２１／１／２００２

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＭＭ／ＤＤ／ＹＹＹＹＭＭ／ＤＤ／ＹＹＹＹ

１２：００１２：００ＡＭＡＭ

ＯＫＯＫＯＫＯＫ

ＢＡＣＫＢＡＣＫ

01 02

1 Press “d” or “c” to select the date format.

2 Press “a” or “b” to set the format. Refer to

the table below for details of the settings.

Displays the date in the “month/day/ year” format.

MM/DD/YYYY

Displays the date in the “day.month. year” format.

DD.MM.YYYY

YYYY.MM.DD

Explanation

Setting

Displays the date in the “year.month. day” format.

２００２１０２９２００２１０２９

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＹＹＹＹＭＭＤＤＹＹＹＹＭＭＤＤ

８８４０４０ＡＭＡＭ

ＯＫＯＫＯＫＯＫ

ＢＡＣＫＢＡＣＫ

Once you have set the date and time, press the

“MENU/OK” button. Pressing the “MENU/OK”

button switches the camera to still photography

or Playback mode.

●

You cannot set the seconds, but you can set the time

more accurately by pressing the “MENU/OK” button

when the time on your reference clock is at zero

seconds.

●

If the camera is left for 30 minutes or longer with the

batteries removed and the AC power adapter

disconnected, the date and time settings may revert to

the factory default settings. If this occurs, reset the date

and time.

ＰＯＷＥＲＳＡＶＥＰＯＷＥＲＳＡＶＥ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＵＳＢＭＯＤＥＵＳＢＭＯＤＥ

ＯＮＯＮ

ＰＯＳＴＶＩＥＷ

ＯＮＯＮ

ＳＥＴＳＥＴ

ＤＳＣＤＳＣ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＯＫＯＫ

ＢＡＣＫＢＡＣＫ

Changing the date and time

To change the date and time:

1 Press the “MENU/OK” button.

2 Use “d” or “c” to select “g” OPTION and

then use “a” or “b” to select “SET–UP”.

3 Press the “MENU/OK” button.

4 Select “DATE/TIME” and press “c”.

See P.15 for information on setting the date and

time.

0103 0204

SETTING THE DATE AND TIME

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix A 204 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info