Bedienungsanleitung Fujifilm Finepix A 204 (Seite 36 von 64) (Englisch)

101431

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Software needed for playing back movies, etc.

Launches the FinePixViewer

software when a camera is

connected.

Software used to read PDF-format documents on a

personal computer. This software is needed to read the

User’s Guides for FinePixViewer.

Creates a FinePix CD Album.

Used for videoconferencing (Windows only).

Allows you to display thumbnail lists of the

images stored on your PC or in the camera,

print the images individually or as an index,

display the images at full size and perform

some basic image processing.

✽ Note that the software configuration differs slightly depending on your operating system.

Connect the camera

with “DSC” selected as

the USB setting

(➡P.84).

Connect the camera

with “PC CAM”

selected as the USB

setting (➡P.87).

Allows a digital camera to be used

as USB Mass Storage (removable

disk drive, card reader).

Allows a digital camera to be

used as a PC Camera.

ImageMixer VCD

for FinePix

FinePixViewer

PictureHello

Acrobat Reader

QuickTime

USB PC Camera

Driver

Exif Launcher

USB Mass Storage

Driver

6 Software Installation

6.1 The Software Components

When the camera is in Sleep mode, pressing

any button on the camera will switch the LCD

monitor back on. Sleep mode offers a useful

alternative to switching the camera off because

the camera is ready to use far more quickly.

Even when the camera is asleep, you can still

release the shutter and take pictures.

●

Power Save/Auto Power Off does not function when

a USB connection is being used.

●

Operation can also be restored by pressing buttons

other than the shutter button.

●

To switch the camera back on, briefly switch the

camera off and then on again.

The Sleep function does not operate when the

LCD monitor is switched off, while you are

setting the quality or when the camera is in

SET–UP or Playback mode. However, if the

camera controls are not used for 2 minutes, the

camera automatically switches off.

g POWER SAVE

SET–UP

hPower saving “ON” (default setting)

Power consumption is kept to a minimum to

prevent battery depletion. You should select the

“ON” setting when you are using alkaline

batteries.

iIf the camera is not used for approximately 30

seconds, the LCD monitor switches off temporarily

to reduce power consumption (Sleep mode).

iOnce the camera is in Sleep mode, if it is left

unused for a further 90 seconds, it is automatically

switched off.

iThe charging time for the flash increases slightly

because the flash charging power is reduced.

hPower saving “OFF”

Batteries are more likely to run flat since no

power reduction measures (sleep mode, etc.)

are used. However, this function automatically

switches the camera off if the camera is not

used for approximately 2 minutes.

ＰＯＳＴＶＩＥＷＰＯＳＴＶＩＥＷ

ＤＡＴＥ／ＴＩＭＥ

ＵＳＢＭＯＤＥＵＳＢＭＯＤＥ

ＯＮＯＮ

ＰＯＷＥＲＳＡＶＥ

ＯＮＯＮ

ＳＥＴＳＥＴ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＤＳＣＤＳＣ

ＢＡＣＫＢＡＣＫ

Ｏ

Ｋ

ＯＫ

Factory default

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix A 204 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info