Bedienungsanleitung Fujifilm FinePix A 360 (Seite 42 von 49) (Englisch)

101445

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

8382

Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.

(Lit red)

(Blinking red)

The camera batteries are low or

completely out of charge.

Load new or fully charged batteries.

Warning Displayed Explanation Remedy

Camera malfunction or fault.

i Turn the camera on again, taking care not to

touch the lens.

i Turn the camera off and on again. If the

message still appears, contact your FUJIFILM

dealer.

There is a strong likelihood of camera

shake because the shutter speed is slow.

Use flash photography. However, use a tripod for

some scenes and modes.

The AF (autofocus) cannot work effectively.

i If the image is too dark, take the picture at a

distance of around 2 m (6.6 ft.) from the subject.

i Use AF lock to take the picture.

Outside the AE continuous range. The picture can be taken, but the correct

brightness (exposure) will not be obtained.

No xD-Picture Card is inserted. Insert an xD-Picture Card.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i Camera fault.

i Format the xD-Picture Card on the camera.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the message still

appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The xD-Picture Card is full. Erase some images or use an xD-Picture Card

that has ample free space.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The xD-Picture Card format is incorrect.

i Camera fault.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the message still

appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The frame number has reached 999-9999.

1 Insert a formatted xD-Picture Card into the

camera.

2 Set “RENEW” as the “FRAME NO.” setting in

the “SET-UP” menu.

3 Start taking pictures (The frame number starts

from “100-0001”).

4 Set “CONT.” as the “FRAME NO.” setting in

the “SET-UP” menu.

i The data could not be recorded due to

an xD-Picture Card error or a

connection error between the xD-

Picture Card and camera.

i The image cannot be recorded as it is

too large to fit in the available space on

the xD-Picture Card.

i Re-insert the xD-Picture Card or turn the

camera off and then on again. If the message

still appears, contact your FUJIFILM dealer.

i Use a new xD-Picture Card.

i The played back file was not recorded

correctly.

i The xD-Picture Card contact area is

soiled.

i Camera fault.

i An attempt was made to play a movie

that was not recorded on this camera.

i Images cannot be played back.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the message still

appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i Movies cannot be played back.

Warning Displayed Explanation Remedy

A protected file was encountered. Protected files cannot be erased. Remove the

protection.

Prints were specified for 1000 or more

frames in the DPOF frame settings.

The maximum number of frames for which prints

can be specified on the same xD-Picture Card is

999.

Copy the images for which you want to order

prints onto another xD-Picture Card and then

specify the DPOF settings.

An attempt was made to trim a 0.3M

image.

The image cannot be trimmed.

i An attempt was made to trim an image

shot using a camera other than FinePix

A360 / FinePix A370.

i The image is damaged.

The image cannot be trimmed.

Displayed for PictBridge. This message appears when printing is performed

from a FUJIFILM printer that supports PictBridge.

Refer to the Owner’s Manual for the printer for

details.

An attempt was made to specify DPOF

settings for an image that is not supported

by DPOF.

DPOF printing cannot be used with this image

format.

The camera is not connected to PC or

printer.

i Check that the USB cable (mini-B) is connected

correctly.

i Check that your printer is turned on.

Displayed for PictBridge.

i Check that the printer is not out of paper or out

of ink.

i Turn the printer off briefly and then turn it back

on.

i Refer to the user manual supplied with your

printer.

Displayed for PictBridge. Check that the printer is not out of paper or out of

ink. Printing automatically restarts when the error

is cleared. If the message still appears after

checking, press the “MENU/OK” button to restart

printing.

Displayed for PictBridge.

i Refer to the user manual for the printer being

used and check whether the printer supports the

JFIF-JPEG or Exif-JPEG image format. If not,

the printer cannot print the images.

i Movie images cannot be printed.

i Was the image data photographed using

FinePix A360 / FinePix A370?

You may not be able to print some images

photographed on other cameras.

The timing for recording was incorrect

because the xD-Picture Card was

formatted on a PC.

Use an xD-Picture Card that was formatted on

the camera.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm FinePix A 360 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info