101447
36
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
USB socket
PC
AC-3VX
(
sold separately
)
USB socket
(mini-B)
Camera
71
Viewing Images
6
70
6.3 CONNECTING TO A PC
The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera with the PC before
installing all the software.
This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card (P.71).
CD-ROM
(Software for FinePix BX)
DSC
(
Mass storage device
)
mode
6.3.1
Connecting to a PC
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
h DSC” appears on the LCD monitor.
h Power save and Auto power off are disabled
during USB connection.
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.73 for information on the
disconnection procedure.
!
Do not disconnect the USB cable (mini-B) when the camera
is communicating with a PC. See P.73 for information on the
disconnection procedure.
1Insert an xD-Picture Card into the camera. Plug
the AC power adapter connector into the “DC IN
3V” socket on the camera and then plug the
adapter into the power outlet.
2Press the “POWER” button to turn the camera
on.
3Select “” in “USB MODE” in the “SET-UP”
menu (P.52).
4Press the “POWER” button to turn the camera
off.
1Turn your PC on.
2Connect the camera to your PC using the USB
cable (mini-B).
3Press the “POWER” button to turn the camera
on.
USE AT DSC MODE
01
03
02 04
1
Set a camera
2
Connect a camera to a PC
!
Make sure that the USB cable (mini-B) is connected correctly
and pushed in.
/ LAL A NGN G .
USBU S B MODEM O D E
: ENGE N G LIL I SHS H
SES E T
-
UPU P
: CONC O N T.T .
4
1 2 3 5
SETS E T
CANCELC A N C E L
FRAMEF R A M E N O.O .
When displaying “[
If“s”appears and then
[” is displayed on the LCD
monitor, “
” (DSC mode) is not selected in “USB
MODE”. Disconnect the USB cable (mini-B) to the
camera and restart the procedure from step
1.
CHECC H E C K I NGN G USBU S B
USBU S B
Continued
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujifilm Finepix A 370 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info