Bedienungsanleitung Fujifilm Finepix A 403 (Seite 58 von 63) (Englisch)

101449

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

115114

Explanation of Terms

DPOF: Digital Print Order Format

DPOF is a format used for recording information on a storage media (image memory card, etc.) that allows

you to specify which of the frames shot using a digital camera are printed and how many prints are made of

each image.

EV:

A number that denotes exposure. The EV is determined by the brightness of the subject and sensitivity (speed) of

the film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the

subject changes, a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting

the aperture and shutter speed. When the amount of light striking the CCD doubles, the EV increases by 1.

Likewise, when the light is halved, the EV decreases by 1.

JPEG:

Joint Photographics Experts Group

A file format used for compressing and saving color images. The compression ratio can be selected, but the higher the

compression ratio, the poorer the quality of the expanded image.

Motion JPEG:

A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in

the file are recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.

PC Card:

A generic term for cards that meet the PC Card Standard.

PC Card Standard:

A standard for PC cards determined by the PCMCIA.

PCMCIA:

Personal Computer Memory Card International Association (US).

White Balance:

Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other

hand, devices such as digital cameras see a white subject as white by first adjusting the color balance to suit

the color of the ambient light around the subject. This adjustment is called matching the white balance. A

function that automatically matches the white balance is called an Automatic White Balance function.

Troubleshooting

eIf you think the camera is faulty, check the following once more

Troubleshooting Possible causes Solutions

Nothing happens when I

use the Mode switch.

i Camera malfunction.

i The batteries are exhausted.

i Briefly remove the batteries or

disconnect the AC power adapter. Then

reload the batteries or reconnect the AC

power adapter and try again.

i Fit new or fully charged batteries.

When the camera is

connected to a personal

computer (PC), the shot

image appears on the

camera’s LCD monitor.

i The special USB cable is not connected

correctly to the PC or camera.

i The PC is not switched on.

i Set up the camera and USB cable

correctly.

i Switch the PC on.

The camera no longer

works correctly.

The camera has suffered an unforeseen

problem.

Remove the batteries briefly and then

reload the batteries and try again.

Frame erase does not

erase the frame.

The ERASE ALL function

does not erase all the

frames.

Some frames may be protected. Unprotect frames using the camera on

which the protection was first applied.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix A 403 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info