Bedienungsanleitung Fujifilm finepix a205 (Seite 31 von 43) (Englisch)

287607

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Viewing Images

Windows XP

1The “Found New Hardware” help message

appears in the bottom-right corner of your screen.

This message will close when the settings are

completed. No action is required.

●

This step is not required for subsequent connections.

Proceed to “USING FinePixViewer” on page 63.

◆

Regarding the Icons

◆

The next time you connect the camera, the removable disk drive icon and name change to the

“FinePix” icon and name.

2Specify the settings in the “AutoPlay” dialog box.

h When FinePixViewer is included in the list of actions to perform

Select “Viewing images using FinePixViewer” and then select the “Always do the selected

action” checkbox. (This checkbox may not be shown in some cases.)

Click the [OK] button to launch FinePixViewer.

h When FinePixViewer is not included in the list of actions to perform

Select “Take no action” and then select the “Always do the selected action” checkbox. (This

checkbox may not be shown in some cases.)

Click the [OK] button and launch FinePixViewer manually.

3A new removable disk icon appears in the “My Computer” window.

6.1 CAMERA CONNECTION

h When the camera and computer are exchanging

data, the self-timer lamp blinks and the viewfinder

lamp blinks alternately green and orange.

h “≥” appears on the LCD monitor.

h Power Save and Auto Power Off are disabled

during USB connection.

●

Before replacing the xD-Picture Card, always disconnect the

camera from the PC using the procedure on P.62.

●

Do not disconnect the USB cable when the camera is

communicating with the PC. See P.62 for information on the

disconnection procedure.

●

The Windows CD-ROM may also be required during installation. In this event, switch CD-ROMs as directed by the

on-screen instructions.

h FinePixViewer automatically starts up.

✽ Screen for Windows 98 SE

Windows 98/98 SE/Me/2000 Professional/Macintosh

h A removable disk icon appears and you can use your PC to transfer files to and from the camera.

Windows Macintosh

If the above operations do not occur, you do not have the required software programs or drivers installed

on your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.

1Insert an xD-Picture Card containing photographed

images into your camera. Plug the AC power

adapter connector into the DC IN 3V socket on the

camera and then plug the adapter itself into the main

power outlet.

2Slide the power switch to the side to turn the

camera on.

3Set the “USB MODE” setting in the “SET-UP”

menu to “¶” (➡P.46).

4Slide the Power switch to the side to turn the

camera off.

1Switch your PC on.

2Use the USB cable (included) to connect the

camera to your computer.

3Switch the camera on.

Use at DSC mode

02 04

(USB)

socket

DC IN 3V

socket

(USB)

socket

Camera

Set a camera

Connect a camera to a computer

Set a computer

●

Take care to ensure that the included USB cable is

connected the correct way around and that the plugs are

pushed fully into the connection sockets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm finepix a205 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info