Bedienungsanleitung Fujifilm finepix a310 (Seite 27 von 43) (Englisch)

287610

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Software

Installation

THE SOFTWARE COMPONENTS

Software

Installation

Software needed for playing back movies, etc.

Launches the FinePixViewer

software when a camera is

connected.

Software used to read PDF-format documents on a

personal computer. This software is needed to read

the User’s Guides for FinePixViewer.

Creates a FinePix CD Album

(OS-X is not supported).

“Used when you open RAW

files that were photographed

on cameras that support the

RAW file format.”

Used for videoconferencing (Windows only).

Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images

individually or as an index, display the images at full size and perform some basic image processing.

✽ Note that the software configuration differs slightly depending on your operating system.

Connect the camera

with “DSC” selected as

the USB setting

(➡P.63).

Connect the camera

with “PC CAM”

selected as the USB

setting.

Allows a digital camera to be used

as USB Mass Storage (removable

disk drive, card reader).

Allows a digital camera to be

used as a PC Camera.

Acrobat Reader (Macintosh only)

QuickTime

USB PC Camera

Driver

Exif Launcher

USB Mass Storage

Driver

ImageMixer VCD

for FinePix

RAW FILE

CONVERTER LE

FinePixViewer

PictureHello

SET–UP

FORMAT

Formatting erases all the frames (files).

Initialize the xD-Picture Card for use in the

camera.

You should copy important files that you do not

want to be erased to your computer or another xD-

Picture Card.

1Press “d” or “c” to select “YES”.

2Press the “MENU/OK” button to erase all the

files and format the xD-Picture Card.

Formatting erases protected files also.

FRAME NO.

CONT. : Pictures are stored beginning from the

highest file number stored on the last xD-

Picture Card used.

RENEW: Pictures are stored on each xD-Picture

Card beginning with a file number “0001”.

Setting this function to “CONT.” makes file

management easier as it ensures that file names

are not duplicated when images are downloaded to

a PC.

You can check the file number by viewing the

image. The last 4 digits of the 7-digit number in the

top right corner of the screen are the file numbers,

while the first 3 digits show the directory number.

●

When you change the xD-Picture Card, always switch the

camera off before you open the battery cover. If you open the

battery cover without switching the camera off, the Frame No.

memory may not function.

●

File No. run from 0001 to 9999. Once 9999 is exceeded, the

directory number changes from 100 to 101. The maximum

number is 999–9999.

●

The displayed frame number may differ for images

photographed on other cameras.

●

If the “®” message appears, see P.75.

１００−０００９１００−０００９

２００３．３．１２００３．３．１

File number

Directory number

Frame number

CONT. RENEW

Formatted xD-Picture Card used for both

A and B.

●

If the xD-Picture Card already contains image files with file

numbers higher than the highest file number on the last xD-

Picture Card, images are stored beginning from the highest

file number on the current xD-Picture Card.

●

If the “å” “˚” “ƒ” or

“

the media, refer to P.75 and take the appropriate measures.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm finepix a310 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info