Bedienungsanleitung Fujifilm finepix a310 (Seite 33 von 43) (Englisch)

287610

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Viewing Images

Windows XP

The “Found New Hardware” help message

appears in the bottom-right corner of your

screen. This message will close when the

settings are completed. No action is required.

●

This step is not required for subsequent connections.

Proceed to “Using FinePixViewer” on page 67.

◆

Regarding the Icons

◆

The next time you connect the camera, the removable disk drive icon and name change to the

“FinePix” icon and name.

Specify the settings in the “AutoPlay” dialog box.

h When FinePixViewer is included in the list of actions to perform

Select “Viewing images using FinePixViewer” and then select the “Always do the

selected action” checkbox. (This checkbox may not be shown in some cases.)

Click the [OK] button to launch FinePixViewer.

h When FinePixViewer is not included in the list of actions to perform

Select “Take no action” and then select the “Always do the selected action” checkbox.

(This checkbox may not be shown in some cases.)

Click the [OK] button and launch FinePixViewer manually.

A new removable disk icon appears in the “My Computer” window.

CAMERA CONNECTION

If you are using a Windows PC, the driver settings are specified automatically when installation is

completed. No further action is required.

Always use the prescribed procedure when disconnecting or switching off the camera (➡P.66).

●

On Windows XP and Mac OS X, you must specify the automatic launch settings the first time you connect the

camera to your computer.

●

Take care to ensure that the included USB cable is connected the correct way around and that the plugs are pushed

fully into the connection sockets.

h When the camera and computer are exchanging

data, the self-timer lamp blinks and the viewfinder

lamp blinks alternately green and orange.

h ““” appears on the screen.

h Power Save and Auto Power Off are disabled

during USB connection.

●

Before replacing the xD-Picture Card, always disconnect the

camera from the PC using the procedure on P.66.

●

Do not disconnect the USB cable when the camera is

communicating with the PC. See P.66 for information on the

disconnection procedure.

●

The Windows CD-ROM may also be required during installation. In this event, switch CD-ROMs as directed by the

on-screen instructions.

h FinePixViewer automatically starts up.

✽ Screen for Windows 98 SE

Camera Operation

PC Operation

Windows 98/98 SE/Me/2000 Professional

h A removable disk icon appears and you can use your PC to transfer files to and from the

camera.

Windows Macintosh

If the above operations do not occur, you do not have the required software programs or drivers

installed on your PC. Complete the required PC setup procedures. Then reconnect the camera to

your PC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm finepix a310 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info