Bedienungsanleitung Fujifilm Finepix A405 (Seite 38 von 43) (Englisch)

510410

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

7574

Troubleshooting Possible causes Solutions

Nothing happens when

I use the Mode Switch.

Screens are not

displayed in English.

There is no image on

the TV.

When the camera is

connected to a

personal computer

(PC), the shot image

appears on the

camera’s LCD monitor.

The camera no longer

works correctly.

i Camera malfunction.

i The batteries run out.

i A language other than English is

selected in the " " setting in

SET-UP. (➡P.46)

i The included video cable was

connected during movie playback.

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The video output setting is incorrect.

i The included USB cable is not properly

connected to the computer or camera.

i The PC is not switched on.

The camera has suffered an unforeseen

problem.

i Briefly remove the batteries or

disconnect the AC power adapter.

Then reload the batteries or reconnect

the AC power adapter and try again.

i Fit new or fully charged batteries.

i Select "ENGLISH" in the " "

setting in SET-UP. (➡P.46)

i After the movie playback mode is

stopped, connect the camera and TV

correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

i Change the setting to “NTSC” or “PAL”

P.46.

i Set up the camera and the included

USB cable correctly.

i Switch the PC on.

Briefly remove the batteries or

disconnect the AC power adapter. Then

reload the batteries or reconnect the AC

power adapter and try again.

Troubleshooting eIf you think the camera is faulty, check the following once more.

Troubleshooting Possible causes Solutions

No power.

Power cuts out during

operation.

Batteries run out

quickly.

No photograph is taken

when the Shutter

button is pressed.

Can’t use the flash to

take pictures.

The playback image is

too dark even though

the flash was used.

The image is blurred.

There is speckling on

the image.

Can’t format the xD-

Picture Card.

Frame erase does not

erase the frame.

The ERASE ALL

function does not

erase all the frames.

i The batteries run out.

i The batteries are loaded backwards.

i The battery cover is not closed

properly.

i The AC power adapter plug has come

out of the power outlet.

The batteries run out.

i You are using the camera in extremely

cold conditions.

i The terminals are soiled.

i The batteries get un-rechargeable.

i No xD-Picture Card is inserted.

i The xD-Picture Card is fully recorded.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The camera was not used for 2

minutes.

i The batteries run out.

i The flash is set to Suppressed Flash

mode.

i You pressed the Shutter button while

the flash was charging.

i The batteries run out.

i The Subject is too far away.

i Your finger was covering the

flash/flash control sensor.

i The lens is dirty.

i The photographed subject was too

dark.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without

selecting Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The shot was taken with a slow shutter

speed (long exposure) in a high-

temperature environment.

The xD-Picture Card contact area is

soiled.

Some frames may be protected.

i Fit new or fully charged batteries.

i Load the batteries in the correct

direction.

i Close the battery cover correctly.

i Plug the adapter back in.

Fit new or fully charged batteries.

i Put the batteries in your pocket or

another warm place to heat it and then

load it into the camera just before you

take a picture.

i Wipe the battery terminals with a

clean, dry cloth.

i Fit new batteries.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card.

i Wipe the xD-Picture Card contact

area with a clean dry cloth.

i Insert a new xD-Picture Card.

i Switch the camera on.

i Fit new or fully charged batteries.

i Set the flash mode to Auto, Red-eye

Reduction or Forced Flash (The flash

cannot be used in some modes).

i Wait until charging is completed before

pressing the Shutter button.

i Fit new or fully charged batteries.

i Move to within the effective flash range

before taking the shot.

i Hold the camera correctly.

i Clean the lens.

i Try standing approx. 2 m (6.6 ft.) from

your subject to take the picture.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and

does not indicate a camera fault.

Wipe the xD-Picture Card contact area

with a clean dry cloth.

Unprotect frames using the camera on

which the protection was first applied.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix A405 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info