Bedienungsanleitung Fujifilm Finepix E510 (Seite 10 von 59) (Englisch)

101489

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Using the Camera

USING VIEWFINDER

VIEWFINDER LAMP DISPLAY

Frame the shot so that the subject fills the entire AF

(Auto Focus) frame. When a picture is taken at a

distance of 0.6 m to 1.5 m (2.0 ft. to 4.9 ft.) using

the viewfinder, only the shaded area in the figure is

photographed.

To take pictures using the viewfinder, press the

“BACK (DISP)” button to turn the LCD monitor off.

Turning the LCD monitor off conserves battery

power.

●

The viewfinder cannot be used to take shots in Macro mode.

●

For more precise shot framing, use the LCD monitor to take

the picture.

Brace your elbows against your sides and hold the

camera with both hands. Position your right thumb

so that it is handy for using the zoom.

●

Moving the camera while shooting gives a blurred picture

(camera shake). Use a tripod to avoid camera shake,

particularly for shots in the dark when the selected flash

mode is Suppressed flash.

AF frame

Bebeep

●

The image shown on the LCD monitor before the picture is

taken may differ in brightness, color, etc. from the image

actually recorded. Play back the recorded image to check it

(➡P.24).

●

The subject may sometimes be difficult to see clearly on the

LCD monitor (in bright sunlight or dimly lit scenes, etc.). If so,

use the viewfinder to take the picture.

Use the LCD monitor to frame the shot so that the

subject fills the entire AF (Autofocus) frame.

Press the shutter button down halfway. When a

short double-beep is heard, the camera focuses on

your subject. The AF frame on the LCD monitor

becomes smaller and the camera sets the shutter

speed and aperture. The viewfinder lamp (green)

changes from blinking to lit.

●

When a short double-beep is not heard and “{” appears on

the LCD monitor, the camera cannot focus.

●

Pressing the shutter button down halfway freezes the image

on the LCD monitor briefly. This image is not the recorded

image.

●

If “{” appears on the LCD monitor (e.g. the shot is too dark

for the camera to focus), try standing about 2 m (6.6 ft.) from

the subject to take the picture.

Press the shutter button down fully. When a

clicking noise is heard, the camera records the

image.

●

There is a slight delay between the shutter button being

pressed and the picture being taken. Play back the shot to

check the image.

●

When pressing the shutter button down fully in one motion,

the picture is taken without the AF frame changing.

●

When the camera takes the picture, the viewfinder lamp lights

orange (shooting disabled). The viewfinder lamp then turns

green and the next picture can be taken.

●

When taking a picture using the flash, the image may

disappear and go dark as the flash charges. The viewfinder

lamp then blinks orange.

●

See P.102, 103 for information on the warning displays.

Click

Before the flash fires, “∑” appears on the LCD

monitor.

Ｎ１Ｎ１２

３２０３２０Ｆ６．４６．４

AF frame

TAKING PICTURES

(

B AUTO MODE

)

PHOTOGRAPHY MODE

◆

Subjects not suitable for autofocus

◆

The FinePix E500 / FinePix E510 uses a high-precision autofocusing mechanism. However, it may

have difficulty focusing on the following:

h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass

h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects

h Fast moving subjects

h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is

either closer or further away than your subject

(such as a shot of someone against a

background with strongly contrasting

elements)

For such subjects use AF/AE lock (➡P.21).

Display Status

Lit green Ready to shoot

Blinking green AF/AE is in progress, camera shake warning or AF warning (ready to shoot)

Blinking green and

orange alternately

Recording to xD-Picture Card (ready to shoot)

Lit orange Recording to xD-Picture Card (not ready)

Blinking orange Charging the flash (flash will not fire)

Blinking green

(1-second intervals)

Camera in Power save mode (➡P.71)

Blinking red

i xD-Picture Card Warnings

No card inserted, card not formatted, incorrect format, card full, xD-Picture Card error

i Lens operation error

✽ Detailed warning messages appear on the LCD monitor (➡P.102, 103).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix E510 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info