Bedienungsanleitung Fujifilm Finepix E510 (Seite 53 von 59) (Englisch)

101489

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

105104

Some frames may be protected.

A language other than English is

selected in the “ ” setting in

the “SET-UP” menu (➡P.70).

i The camera volume is set too low.

i The microphone was blocked during

shooting/recording.

i There is something covering the

speaker during playback.

i The camera is not connected to the

TV correctly.

i “TV” is selected as the TV input.

i The video output setting is incorrect.

The video output setting is incorrect.

i The USB cable (included) is not

correctly connected to the PC or

camera.

i The PC is not turned on.

The camera has suffered an

unforeseen problem.

“

” is not selected in USB mode in

the “SET-UP” menu.

Frame erase does

not erase the frame.

The ERASE ALL

function does not

erase all the frames.

Screens are not

displayed in English.

The camera does not

emit any sound.

There is no image on

the TV.

The TV image is

black and white.

When the camera is

connected to a PC,

the photographed

image appears on

the camera’s LCD

monitor.

The camera no longer

works correctly.

Can’t print with

PictBridge.

The camera was

connected to a PC

when the USB mode

was set to “

”.

Unprotect frames using the camera on

which the protection was first applied.

1Press the “MENU/OK” button to

display the menu.

2Press “d” or “c” to select “F” and

press “a” or “b” to select “SET-UP”.

SET-UP screen appears on the LCD

monitor.

3Press “d” or “c” to move to option 3

and then press “a” or “b” to select

“”

4Press “d” or “c” several times to

select “ENGLISH”.

5Press the “MENU/OK” button.

i Adjust the volume.

i Take care not to block the microphone

during shooting/recording.

i Make sure that the speaker is

uncovered.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

i Change the setting to “NTSC” or

“PAL”

(➡P.70)

Change the setting to “NTSC” or “PAL”

(➡P.70)

i Set up the camera and the USB cable

(included) correctly.

i Turn the PC on.

Briefly remove the batteries or

disconnect the AC power adapter.

Then, reload the batteries or reconnect

the AC power adapter and try again.

Select “

” in USB mode in the

“SET-UP” menu.

Perform steps 1 to 3 to remove the

camera from the PC.

h Windows

1 The “New Hardware Found” wizard

(or “Scanner and Camera” wizard)

appears. If the wizard does not

appear, proceed to step 3.

2 Click the [Cancel] button.

3 Disconnect the camera from the PC.

h Macintosh

1 The window for locating the driver

appears. If the window does not

appear, proceed to step 3.

2 Click the [Cancel] button.

3 Disconnect the camera from the

Macintosh.

Troubleshooting Possible causes Solutions

Troubleshooting eIf you think the camera is faulty, check the following once more.

Troubleshooting Possible causes Solutions

No power.

Power cuts out during

operation.

Batteries run out

quickly.

No photograph is

taken when the

shutter button is

pressed.

Can’t use the flash.

The flash settings are

restricted and cannot

be selected.

The playback image

is dark even though

the flash was used.

The image is blurred.

There is speckling on

the image.

Can’t format the xD-

Picture Card.

i The batteries have run out.

i The batteries are loaded backwards.

i The battery cover is not closed

correctly.

i The AC power adapter plug has

come out of the power outlet.

The batteries have run out.

i Camera is being used in extremely

cold conditions.

i The terminals are soiled.

i The batteries can no longer be

recharged.

i The rechargeable batteries (if used)

have become deactivated, or the

battery capacity has diminished due

to the memory effect.

i No xD-Picture Card is inserted.

i The xD-Picture Card is full.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The Auto power off function has

turned the camera off.

i The batteries have run out.

i The shutter button was pressed while

the flash was charging.

i The flash is not popped up.

i The Mode dial is set to “

”

Landscape.

The Mode dial is set to “

”, “

” or

“

”.

i The subject is too far away.

i Your finger was covering the

flash/flash control sensor.

i The lens is dirty.

i The photographed subject was too

dark.

i You photographed scenery with

Macro mode selected.

i You took a close-up shot without

selecting Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The picture was taken with a slow

shutter speed (long exposure) in a

high-temperature environment.

The xD-Picture Card contact area is

soiled.

i Load new or fully charged batteries.

i Load the batteries in the correct

direction.

i Close the battery cover correctly.

i Plug the adapter back in.

Load new or fully charged batteries.

i Put the batteries in your pocket or

another warm place to heat them and

then load them into the camera just

before you take a picture.

i Wipe the battery terminals with a

clean, dry cloth.

i Load new or fully charged batteries.

i Use the rechargeable battery

discharging function to restore the

rechargeable batteries to full

capacity.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or

erase some unwanted frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact

area with a clean dry cloth.

i Insert a new xD-Picture Card.

i Turn the camera on.

i Load new or fully charged batteries.

i Wait until the charging is completed

before pressing the shutter button.

i Pop up the flash.

i Change the Photography mode.

The flash settings are restricted

because the camera settings are

tailored to the scene being shot.

Change the Photography mode for a

wider range of flash settings.

i Move to within the effective flash

range before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Try standing about 2 m (6.6 ft.) from

your subject to take the picture.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and

does not indicate a camera fault.

Wipe the xD-Picture Card contact area

with a clean dry cloth.

Fujifilm Finepix E510 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info