Bedienungsanleitung Fujifilm Finepix F 610 (Seite 50 von 55) (Englisch)

101507

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

9998

The image is blurred.

There is speckling on

the image.

The camera does not

emit any sound.

Frame erase does not

erase the frame.

The ERASE ALL

function does not erase

all the frames.

There is no image or

sound on the TV.

When the camera is

connected to a

computer, the

photography or playback

screen appears on the

camera’s LCD monitor.

Nothing happens when

I use the camera

switches.

The camera no longer

works correctly.

i The lens is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without

selecting Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The shot was taken with a slow shutter

speed (long exposure) in a high-

temperature environment.

i The camera volume is set too low.

i The microphone was blocked during

shooting/recording.

i There is something covering the speaker

during playback.

Some frames may be protected.

i An A/V cable was connected during

movie playback.

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The TV volume is turned down.

i The USB cable (included) is not properly

connected to the computer or camera.

i The PC is not switched on.

i Camera malfunction.

i The battery is exhausted.

The camera has suffered an unforeseen

problem.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the shot.

This is a characteristic of CCDs and does

not indicate a camera fault.

i Adjust the volume.

i Take care not to block the microphone

during shooting/recording.

i Ensure that the speaker is uncovered.

Remove the protection.

i After the movie playback mode is

stopped, connect the camera and TV

correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

i Adjust the volume.

i Set up the camera and the USB cable

(included) correctly.

i Switch the PC on.

i Briefly remove the battery or disconnect

the AC power adapter. Then reload the

battery or reconnect the AC power

adapter and try again.

i Load a new fully charged battery.

Briefly remove the battery or disconnect

the AC power adapter. Then reload the

battery or reconnect the AC power adapter

and try again.

If the error message is still

displayed, contact your FUJIFILM dealer.

Troubleshooting Possible causes Solutions

Troubleshooting eIf you think the camera is faulty, check the following once more.

The self-timer lamp

does not light when

charging the battery.

The self-timer lamp

blinks during charging

and the battery won’t

charge.

No power.

Power cuts out during

operation.

Battery runs out quickly.

No photograph is taken

when the Shutter button

is pressed.

Can’t use the flash to

take pictures.

The flash settings are

restricted and cannot

be selected.

Can only select

“Suppressed Flash”

flash mode.

The “

” or “

” quality

modes cannot be

selected.

The photographed

image is dark even

though the flash was

used.

i There is no battery in the camera.

i The camera and AC power adapter are

not connected correctly.

i The battery terminals are dirty.

i The battery is faulty or flat.

i The battery is exhausted.

i The AC power adapter plug has come

out of the power outlet.

i The battery is loaded the wrong way

round.

i The battery cover is not closed properly.

The battery is exhausted.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The battery is flat.

i No xD-Picture Card is inserted.

i The xD-Picture Card is fully recorded.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The Auto Power Off function has

switched the camera off.

i The battery is exhausted.

i The Shutter button was pressed while

the flash was charging.

i The flash is not popped up.

i The camera is set to Scenery in Scene

Position mode.

i Continuous shooting is selected.

Scene Position mode is selected.

Continuous shooting is selected.

The sensitivity is set to 800 (high-sensitivity

shooting).

i The subject is too far away.

i Your finger was covering the flash/flash

control sensor.

i Load the battery.

i Connect the camera and AC power

adapter correctly.

i Take the battery out briefly and then

reload it.

i Wipe the battery terminals with a clean,

dry cloth.

i Fit a new battery. If the battery still fails

to charge, contact an authorized

FUJIFILM service center.

i Load a fully charged battery.

i Plug the adapter back in.

i Load the battery in the correct direction.

i Close the battery cover properly.

Load a new fully charged battery.

i Put the battery in your pocket or another

warm place to heat it and then load it

into the camera just before you take a

picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Fit a new battery.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.

i Switch the camera on.

i Load a new fully charged battery.

i Wait until charging is completed before

pressing the Shutter button.

i Pop up the flash.

i Select another Scene Position or change

the photography mode.

i Set continuous shooting to “OFF”.

The flash settings are restricted because

the camera settings are tailored to the

scene being shot. Change the

photography mode for a wider range of

flash settings.

Set continuous shooting to “OFF”.

In the Photography menu, set the

sensitivity to 400 or less.

i Move to within the effective flash range

before taking the shot.

i Hold the camera correctly.

Troubleshooting Possible causes Solutions

Fujifilm Finepix F 610 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info