93
Notes on the Power Supply
The Lithium-ion Battery Pack NP-40 is both compact
and capable of storing large quantities of power.
However, if It is stored for long periods while charged,
the performance of the battery can be impaired.
h If the battery will not be used for some time, run the
battery flat before storing it.
h Always remove the battery from the camera or
battery charger when it is not being used.
h Place the battery pack inside the soft case and store
in a cool place.
✽ The battery should be stored in a dry location with
an ambient temperature between +15°C and +25°C
(+59°F and +77°F).
✽ Do not leave the battery in hot or extremely cold
places.
■ Handling the Battery
To avoid injury or damage, observe the following:
h Do not allow the metal portions of the battery to
touch other metal objects.
h Do not bring the battery close to a flame or throw it
into a fire.
h Do not attempt to disassemble or modify the battery.
h Do not recharge the battery with chargers other
those specified.
h Dispose of used batteries promptly.
To avoid damaging the battery or shortening
its life, observe the following:
h Do not drop the battery or otherwise subject it to
strong impacts.
h Do not immerse the battery in water.
To ensure that you obtain optimum battery
performance, observe the following:
h Always keep the battery terminals clean.
h Store the battery in a cool, dry place. Storing the
battery for long periods in a hot location can shorten
the battery life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This
is normal and is not a malfunction. Use the AC
power adapter supplied with the camera if you are
taking pictures or viewing images for a long
period of time.
■ Specifications of the Enclosed NP-40
Nominal voltage DC 3.7V
Nominal capacity 710 mAh
Operating temperature
0°C to +40°C (+32°F to +104°F)
Dimensions 35.3 mm × 40 mm × 6 mm
(1.39 in. × 1.6 in. × 0.24 in.)
(W × H × D)
Mass (Weight) Approx. 20g (0.7 oz.)
✽ These specifications are subject to change without notice.
Use only the AC-5VW AC Power Adapter with your
FinePix F700 Digital Camera. The use of other AC
power adapters may result in damage to your camera.
h The AC Power Adapter is only intended for indoor
use.
h Plug the connection cord plug securely into the DC
input terminal of the FUJIFILM Digital camera.
h Turn off the power switch of the FUJIFILM Digital
camera before disconnecting the connection cord
from the FUJIFILM Digital camera’s DC input
terminal. To disconnect, take hold of the plug and
pull it out (do not disconnect it by pulling on the cord).
h Do not use the AC power adapter with any device
except the specified device.
h During use, the AC power adapter will become hot
to touch, but this is normal.
h Do not disassemble the AC power adapter. Doing so
could be dangerous.
h Do not use the AC power adapter in a place with
high temperature and high humidity.
h Do not drop or subject the AC power adapter to
strong shocks.
h The AC power adapter may emit a humming noise,
but this is normal.
h If used near a radio, the AC power adapter may
cause static, so play the radio in a distant place.
h Read these instructions.
h Keep these instructions.
h Heed all warnings.
h Follow all instructions.
h Do not use this apparatus near water.
h Clean only with dry cloth.
h Do not block any ventilation openings, Install in
accordance with the manufacturer’s instructions.
h Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
h Protect the power cord from being walked on or
pinched particularly at plugs, convenience
recectables, and the point where they exit from the
apparatus.
h Only use attachments/accessories specified by the
manufacturer.
h Unplug this apparatus during lightning storms or
when unused for long periods of time.
h Refer all servicing to qualified service personal.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cor or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
✽ Very Occasionally, DC output will be prevented by
the operation of the internal protection circuit. In this
event, unplug the AC-5VS/AC-5VHS AC power
adapter from the power socket for a few moments
and then plug it in again. This will restore DC output.
■ Specifications (AC-5VW)
Power Supply AC 100V to 240V,50/60Hz
Rated Input Capacity 13W(U.S.A.and Canada)
0.08A to 0.2A(other countries)
Rated Output DC 5.0V 1.5A
Temperature During Use
0°C to +40°C (+32F to 104F)
Storage Temperature –10°C to +70°C
(+14F to 158F)
Dimensions (MAX.) 40 mm × 21 mm × 79 mm
(1.6 in. × 0.8 in. × 3.1 in.)
(W × H × D)
Mass (Weight) Approx. 110 g (3.9 oz.)
(excluding power cable)
✽ Please note that specifications and characteristics
are subject to change without notice.
■ WARNINGS
To reduce the risk of fire or electric shock, do not
expose the AC power adapter to rain or moisture.
The AC power adapter shall not be exposed to
drippping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the AC
power adapter.
AC Power Adapter
Notes on storage
Notes on Using Y
Notes on the Power Supply
e Be sure to read this information in conjunction with “Safety Notes” ( ➡P.102), to ensure that you
use your camera correctly.
■ Places to Avoid
Do not store or use the camera in the following types
of locations:
h In the rain or in very humid, dirty or dusty places.
h In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer.
h Extremely cold places.
h Places subject to strong vibration.
h Places affected by smoke or steam.
h Places subject to strong magnetic fields (such as
near motors, transformers or magnets).
h In contact with chemicals such as pesticides or next
to rubber or vinyl products for long periods of time.
■ Notes on Immersion in Water or Sand
The FinePix F700 is particularly adversely affected by
water and sand. When you are at the beach or close
to water, ensure that the camera is not exposed to
water or sand. Take care also not to place the camera
on a wet surface. Water or sand inside the camera
can cause faults that may be irreparable.
■ Notes on Condensation
If the camera is carried suddenly from a cold location
into a warm place, water droplets (condensation) may
form on the inside of the camera or on the lens. When
this occurs, switch the camera off and wait an hour
before using the camera. Condensation may also form
on the xD-Picture card. In this event, remove the xD-
Picture card and wait a short time before using it again.
■ When the Camera is Unused for Long
Periods
If you do not intend to use the camera for a long
period of time, remove the battery and the xD-Picture
card before storing the camera.
■ Cleaning Your Camera
h Use a blower brush to remove dust from the lens
and LCD monitor screen as these surfaces, and
then wipe lightly with a soft, dry cloth. If any soiling
remains, apply a small amount of lens cleaning
liquid to a piece of FUJIFILM lens cleaning paper
and wipe gently.
h Do not scratch hard objects against the lens and
LCD monitor screen as these surfaces are easily
damaged.
h Clean the body of the camera with a soft, dry cloth.
Do not use volatile substances such as thinners,
benzine or insecticide, as these may react with
camera body and cause deformation or remove the
coating.
■ Using the Camera Overseas
When travelling overseas, do not place your camera in
the check-in baggage. Baggage handling at airports
may subject baggage to violent shocks, and the
camera may be damaged internally even when no
external damage is visible.
This camera uses the Rechargeable Lithium-ion Battery
Pack NP-40. Note the points below when using the
rechargeable battery. Take particular care to read the
Safety Notes to ensure that you use the battery correctly.
✽ When shipped, the NP-40 is not fully charged. Always
charge the NP-40 before using it.
h When carrying the NP-40,
install it in a digital camera
or keep it in the soft case.
h When storing the NP-40,
place it inside the special
soft case provided.
■ Battery Features
h The NP-40 gradually loses its charge even when not
used. Use a NP-40 that has been charged recently (in
the last day or two) to take pictures.
h To maximize the life of the NP-40, switch the camera
off as quickly as possible when it is not being used.
h The number of available shots will be lower in cold
locations or at low temperatures. Take along a spare
fully charged NP-40.
You can also increase the amount of power produced
by putting the NP-40 in your pocket or another warm
place to heat it and then loading it into the camera just
before you take a picture.
If you are using a heating pad, take care not to place
the NP-40 directly against the pad. The camera may
not operate if you use a depleted NP-40 in cold
conditions.
■ Charging the Battery
h You can charge the battery using the camera and the
AC power adapter (supplied).
i The NP-40 can be charged at ambient temperatures
between 0°C and +40°C (+32°F and +104°F). At an
ambient temperature of +23°C (+73°F), it takes
approximately 2 hours to charge a fully depleted
NP-40 battery.
i You should charge the NP-40 at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-40 at a temperature
outside this range, charging takes longer because the
performance of the NP-40 is impaired.
i You cannot charge the NP-40 at temperatures of 0°C
(+32°F) or below.
h You can also use the optional Battery Charger BC-65
to charge the NP-40. When charging, use the NP-40
battery adapter supplied with the BC-65 (Refer to the
Owner’s Manual for details).
i The NP-40 can be charged using the BC-65 Battery
Charger at ambient temperatures between 0°C and
+40°C (+32°F and +104°F). At an ambient
temperature of +23°C (+73°F), it takes approximately
90 minutes to charge a fully depleted NP-40 battery.
i You should charge the NP-40 at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-40 at a temperature
outside this range, charging takes longer because the
performance of the NP-40 is impaired.
h The NP-40 does not need to be fully discharged or
exhausted flat before being charged.
h The NP-40 may feel warm after it has been charged or
immediately after being used. This is perfectly normal.
h Do not recharge a fully charged NP-40.
■ Battery Life
At normal temperatures, the NP-40 can be used at least
300 times.
If the time for which the NP-40 provides power shortens
markedly, this indicates that the NP-40 has reached the
end of its effective life and should be replaced.
Notes on Using the Battery
(
NP-40
)
Soft case
Battery
(NP-40)
