Bedienungsanleitung Fujifilm Finepix F710 (Seite 22 von 65) (Englisch)

101549

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Advanced Features

When you use the viewfinder to take a

picture in Macro mode, the field visible

through the viewfinder does not match

the field actually photographed because

the viewfinder and lens are in different

positions. Accordingly, you should use

the LCD monitor to take pictures in

Macro mode.

●

Any of following cancels Macro mode:

i Changing the mode dial setting

i Turning the camera off

●

If the flash is too bright, use flash brightness adjustment

(➡P.63).

●

Use a tripod to avoid camera shake when shooting in the

dark (when “

|” appears).

●

The lens is fixed at the wide-angle zoom setting and only the

digital zoom can be used.

●

Once the LCD monitor is turned ON and cannot be turned

OFF.

●

Canceling Macro mode, the LCD monitor remains on.

●

Selecting AF (MULTI), the focusing position remains near the

center of the LCD monitor.

Select Macro mode to take close-up shots.

1Set the Power switch to “q”.

2Press the “e ” Macro button (d ). The “e ”

appears on the LCD monitor indicating that you

can take close-up shots.

To cancel Macro mode, press the “e” Macro

button (d) again.

h Focal range

Approx. 7.5 cm to 80 cm (3.0 in. to 2.6 ft.)

h Effective flash range

Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)

AUTOAUTO

１９１９

01 02

e MACRO

(

CLOSE-UP

)

STILL PHOTOGRAPHY FUNCTIONS

Set the Mode dial to “>”.

Use Manual mode to set any shutter speed and

aperture setting.

Ｍ

５００５００Ｆ５．６Ｆ５．６

１９１９

Shutter speed

Ｍ

１０００１０００Ｆ８Ｆ８

１９１９

Aperture

01 02

> MANUAL

STILL PHOTOGRAPHY FUNCTIONS

Setting the shutter speed

Turn the Command dial to select the shutter speed.

h Shutter speed setting

3 sec. to 1/2000 sec. in 1/3 EV increaments

●

See P.125 for information on EVs.

●

Use of a tripod to prevent camera shake.

●

In shots with long exposures, noise (dots) may appear on the

image.

●

If the shutter speed is set to a speed faster than 1/1000 sec.,

the image may appear dark even if the flash is used.

Setting the aperture

1Hold down the “D” Exposure compensation

button.

2Turn the Command dial to select aperture.

h Aperture settings

Wide-angle: F2.8 to F8 in 1/3 EV increments

Telephoto : F5.6 to F11 in 1/3 EV increments

◆

The exposure indicator

◆

Use the exposure indicator on the LCD monitor as a

guide when setting the exposure.

When the brightness of the subject is outside the

camera’s brightness metering range, the indicator

moves to the (+) end to show that the image will be

overexposed (the (+) turns yellow) or to the (–) end to

show that the image will be underexposed (the (–)

turns yellow).

Ｍ

１０００１０００Ｆ８Ｆ８

１９１９

Exposure

compensation

indicator

Available Photography mode:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix F710 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info