Bedienungsanleitung Fujifilm Finepix F710 (Seite 27 von 65) (Englisch)

101549

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Advanced Features

ＱＵＡＬＩＴＹＱＵＡＬＩＴＹ

１９１９ＦＲＡＭＥＳＦＲＡＭＥＳ

３３３３

１０１０Ｎ

２５２５

1Set the Power switch to “q”.

2Set the Mode dial to Still photography mode.

3Press the Photo mode (p) button.

1Press “d” or “c” to select the “

y” QUALITY

mode and then press “a” or “b” to change the

setting.

2Press the “MENU/OK” button to confirm the

setting.

●

The numbers to the right of each setting show the number of

available frames.

●

When changing the quality mode, the number of available

frames also changes (➡P.25).

01 02

y QUALITY MODE

(

NUMBER OF RECORDED PIXELS

)

p PHOTO MODE STILL PHOTOGRAPHY

The quality setting is retained even when the

camera is turned off or the Mode dial is changed.

Quality settings in Still photography mode

Quality mode

Printing at A4 size or printing part of the image cropped at A5 or A6 size.

N (2832 × 2128)

N (2816 × 1584)

Printing at A4 size or printing part of the image cropped at A5 or A6 size.

For better image quality, select “

5 F” or “¢ F”.

F (2832 × 2128)

F (2816 × 1584)

Printing at A4 or A5 size or printing part of the image cropped at A6 size.

(2048 × 1536)

(2304 × 1296)

Printing at A5 or A6 size.

(1600 × 1200)

™

(2048 × 1152)

Printing at A6 size.

(1280 × 960)

(1536 × 864)

Sample Uses

◆

Quality setting in high-sensitivity mode

◆

If selecting a quality setting other than “1, ¡” when the camera is set to high-sensitivity mode, “&”

appears blinking and the quality cannot be changed.

✽ For full-screen playback on a wide-screen or high-definition TV or to print at HV (Hi Vision) size, select a quality

setting for wide-angle shooting.

While the “C-AF” button is pressed, the camera continues to focus on the main subject in the AF

frame. Use this button to take pictures of a moving subject.

CONTINUOUS AF

STILL PHOTOGRAPHY FUNCTIONS

Available Photography mode:

Set the Power switch to “q”.

Set the Mode dial to “B”, “m”, “,”, “.”, “/”,

“N”, “M”, “<”, or “>”, mode.

Frame the shot so that the subject fills the center of

the image or the entire AF frame.

Press the “C-AF” button.

While the “C-AF” button is held down, the camera

continuously focuses on the main subject inside the

AF frame.

Press the shutter button down halfway (AF/AE lock)

without releasing the button, press the button down

fully to take the picture.

This allows you to shorten the focusing time.

●

Continuous AF cannot be used in the AF AREA or MF

(Manual Focus) modes.

See P.61 for information on changing focus mode.

●

Using the WIDE/STD switch while the “C-AF” button is

pressed cancels Continuous AF mode.

AUTOAUTO

１９１９

AUTOAUTO

１９１９

Because you cannot check the focusing using the

viewfinder, continuous AF is only available when

the LCD monitor is used.

●

See P.20 for information on change the setting to WIDE/STD.

●

See P.79 for information on printing images shot as WIDE images.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix F710 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info