Bedienungsanleitung Fujifilm Finepix F710 (Seite 46 von 65) (Englisch)

101549

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Settings

CCD-RAW

Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received

from the CCD as an image) performed on the camera. Consequently, this task must be performed

on the computer.

Use the bundled RAW FILE CONVERTER LE software to perform the processing on a computer.

Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format

images.

✽ To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your computer.

■ The functions listed below cannot be used in CCD-RAW mode.

During shooting

Wide-angle shooting, Digital zoom, Continuous shooting and FinePix Photo mode (image

quality, sensitivity (ISO 800 and 1600) and FinePix COLOR) are unavailable.

During playback

Playback

image quality

is fixed at 1 (1280 × 960).

Playback can be zoomed up to 400%, but trimed images cannot be saved.

Always press the “MENU/OK” button after the

settings are completed.

SET-UP

When the photography mode is selected with world

time set, “ ” appears on the LCD monitor for 3

seconds.

AUTOAUTO

１９１９

４／１／２００４４／１／２００４

FRAME NO.

(

frame number storage

)

Specifies whether frame numbers are assigned

consecutively from previous numbers or begin

again.

CONT. : Pictures are stored beginning from the

highest file number stored on the last xD-

Picture Card used.

RENEW: Pictures are stored on each xD-Picture

Card beginning with a file number “0001”.

Setting this function to “CONT.” makes file

management easier as it ensures that file names

are not duplicated when images are downloaded to

a PC.

●

When the camera settings are “qRESET”, the frame number

setting (“CONT.” or “RENEW”) is changed to “CONT.” and

the frame number itself does not return to “0001”.

●

When the xD-Picture Card already contains image files with

file numbers higher than the highest file number on the last

xD-Picture Card, images are stored beginning from the

highest file number on the current xD-Picture Card.

CONT. RENEW

Formatted xD-Picture Card used for both

A and B.

Check the file number by viewing the image. The

last 4 digits of the 7-digit number in the top right

corner of the LCD monitor are the file numbers,

while the first 3 digits show the directory number.

●

When changing the xD-Picture Card, always turn the

camera off before opening the battery cover. Opening the

battery cover without turning the camera off may cause the

Frame number memory to not function.

●

File number runs from 0001 to 9999. Once 9999 is exceeded,

the directory number changes from 100 to 101. The

maximum number is 999–9999.

●

The displayed frame number may differ for images

photographed on other cameras.

●

When “æ” appears, see P.118.

１００−０００９１００−０００９

４／１／２００４１２：００ＡＭ４／１／２００４１２：００ＡＭ

２０００２０００Ｆ２．８Ｆ２．８ −０．３−０．３

File number

Frame number

Directory number

Upon returning from a trip, always change the

World time setting back to “ Home”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix F710 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info