Bedienungsanleitung Fujifilm Finepix F710 (Seite 60 von 65) (Englisch)

101549

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Displayed for PictBridge.

This message appears when printing is performed

from a FUJIFILM printer that supports PictBridge.

Refer to the Owner’s Manual for the printer for

details.

119

i The voice memo file is faulty.

i Camera fault.

i The voice memo cannot be played back.

i Contact your FUJIFILM dealer.

The timing for recording was incorrect

because the xD-Picture Card was

formatted on a computer.

Use an xD-Picture Card that was formatted on

the camera.

An attempt was made to specify DPOF

settings for an image that is not supported

by DPOF.

DPOF printing cannot be used with this image

format.

Warning Displayed Explanation Remedy

Camera malfunction or fault.

i Turn the camera on again, taking care not to

touch the lens.

i Turn the camera off and on again. If the

message still appears, contact your FUJIFILM

dealer.

The camera is not connected to PC or

printer.

i Check that the USB cable is connected

properly.

i Check that your printer is turned on.

Displayed for PictBridge.

i Check that the printer is not out of paper or out

of ink.

i Turn the printer off briefly and then turn it back

on.

i Refer to the user manual supplied with your

printer.

Displayed for PictBridge.

Check that the printer is not out of paper or out of

ink. Printing automatically restarts when the error

is cleared. If the error message still appears after

checking, press the “MENU/OK” button to restart

printing.

Displayed for PictBridge.

i Refer to the user manual for the printer being

used and check whether the printer supports the

JFIF-JPEG or Exif-JPEG image format. If not,

the printer cannot print the image (s).

i Movie images cannot be printed.

i Was the image data photographed using

FinePix F710?

You may not be able to print some images

photographed on other cameras.

CCD-RAW is set to ON in SET-UP.

Set CCD-RAW to OFF in SET-UP (➡P.86).

An attempt was made to trim a 1M image

or an image shot using the RAW setting.

The image cannot be trimmed.

i An attempt was made to trim an image

shot using a camera other than FinePix

F710.

i The image is damaged.

The image cannot be trimmed.

An attempt was made to show 5,000 or

more images by date sorting.

No more than 4,999 images can be shown by

date sorting.

118

Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.

(Lit red)

(Blinking red)

The camera battery is low or completely

out of charge.

Load new or fully charged battery.

There is a strong likelihood of camera

shake because the shutter speed is slow.

Use flash photography. The use of tripod is

recommendable for some scenes and modes.

The AF (autofocus) cannot work effectively.

i If the image is too dark, take the picture at a

distance of around 2 m (6.6 ft.) from the subject.

i Use AF lock to take the picture.

Outside the AE continuous range.

Aperture/Shutter speed display

(Lit red)

The picture can be taken, but the exposure will

not be correct.

No xD-Picture Card is inserted. Insert an xD-Picture Card.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i Camera fault.

i Format the xD-Picture Card on the camera.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the error message

is still displayed, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The xD-Picture Card is fully recorded. Erase some images or use an xD-Picture Card

that has ample free space.

i The played back file was not recorded

correctly.

i The xD-Picture Card contact area is

soiled.

i Camera fault.

i You attempted to play a movie that was

not recorded on this camera.

i Images cannot be played back.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the error message

is still displayed, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i Movies cannot be played back.

The frame number has reached 999–9999.

1 Insert a formatted xD-Picture Card into the

camera.

2 Set “RENEW” as the FRAME NO. setting in

the SET-UP menu.

3 Start taking pictures (The frame numbers start

from “100-0001”)

4 Set “CONT.” as the FRAME NO. setting in the

SET-UP menu.

i The data could not be recorded due to an

xD-Picture Card error or a connection

error between the xD-Picture Card and

camera.

i The image cannot be recorded as it is

too large to fit in the available space on

the xD-Picture Card.

i Re-insert the xD-Picture Card or turn the

camera off and then on again. If the message

still appears, contact your FUJIFILM dealer.

i Use a new xD-Picture Card.

i A protected file was encountered.

i An attempt was made to add a voice

memo to protected file.

i Protected files cannot be erased. Remove the

protection.

i Protected files cannot be added voice memos.

Remove the protection.

Warning Displayed Explanation Remedy

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The xD-Picture Card format is incorrect.

i Camera fault.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the error message

is still displayed, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

Prints were specified for 1000 or more

frames in the DPOF frame settings.

The maximum number of frames for which prints can

be specified on the same xD-Picture Card is 999.

Copy the images for which you want to order

prints onto another xD-Picture Card and then

specify the DPOF settings.

Fujifilm Finepix F710 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info