Bedienungsanleitung Fujifilm Finepix F810 (Seite 61 von 65) (Englisch)

101551

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

121

The camera does not

emit any sound.

Frame erase does not

erase the frame.

The ERASE ALL

function does not erase

all the frames.

Screens are not

displayed in English.

There is no image or

sound on the TV.

When the camera is

connected to a PC, the

photographed image or

playback image appears

on the camera’s LCD

monitor.

Nothing happens when I

use the Mode dial.

The camera no longer

works correctly.

Can’t print with

PictBridge.

The camera was

connected to PC when

the USB mode was set

to “

”.

i The camera volume is set too low.

i The microphone was blocked during

shooting/recording.

i There is something covering the speaker

during playback.

Some frames may be protected.

A language other than English is selected in

the “ ” setting in the “SET-UP”

menu (➡P.86).

i The included A/V cable was connected

during movie playback.

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The video output setting is incorrect.

i The TV volume is turned down.

i The USB cable is not correctly connected

to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The battery runs out.

The camera has suffered an unforeseen

problem.

“

” is not selected in USB mode in the

“SET-UP” menu.

i Adjust the volume.

i Take care not to block the microphone

during shooting/recording.

i Make sure that the speaker is uncovered.

Unprotect frames using the camera on

which the protection was first applied.

1Press the “MENU/OK” button to display

the menu.

2Press “d” or “c” to select “

” and press

“a” or “b” to select “SET-UP”. (Press the

“MENU/OK” button to display the SET-UP

screen on the LCD monitor.)

3Press “d” or “c” to move to option 4 and

then press “a ” or “b ” to select

“”.

4Press “d” or “c” several times to select

“ENGLISH”.

5Press the “MENU/OK” button.

i After the movie playback mode is stopped,

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

i Change the setting to “NTSC” or “PAL”

(➡P.86).

i Adjust the volume.

i Set up the camera and the USB cable

(included) correctly.

i Turn the PC on.

i Briefly remove the battery or disconnect

the AC power adapter. Then reload the

battery or reconnect the AC power adapter

and try again.

i Load a new or fully charged battery.

Briefly remove the battery or disconnect the

AC power adapter. Then reload the battery

or reconnect the AC power adapter and try

again.

If the message still appears, contact

your FUJIFILM dealer.

Select “

” in USB mode in the

“SET-UP”

menu.

Perform steps

to remove the

camera from PC.

h Windows

The “New Hardware Found” wizard (or

“Scanner and Camera” wizard) appears.

If the wizard does not appear, proceed to

step

Click the [Cancel] button.

Disconnect the camera from the PC.

h Macintosh

The window for locating the driver

appears. If the window does not appear,

proceed to step

Click the [Cancel] button.

Disconnect the camera from the

Macintosh.

Troubleshooting Possible causes Solutions

120

Troubleshooting eIf you think the camera is faulty, check the following once more.

The viewfinder lamp

does not light when

charging the battery.

The viewfinder lamp

blinks during charging

and the battery won’t

charge.

No power.

Power cuts out during

operation.

Battery runs out quickly.

No photograph is taken

when the shutter button

is pressed.

Can’t use the flash.

The flash settings are

restricted and cannot be

selected.

Can only select

Suppressed flash mode.

Can only select the “

”

and “

™

” quality settings.

Can’t select the “

”,

“

”, “

” and “

≤

”

quality settings.

The playback image is

dark even though the

flash was used.

The image is blurred.

There is speckling on

the image.

i There is no battery in the camera.

i The camera and AC power adapter are

not connected correctly.

i The battery terminals are dirty.

i The battery can no longer be recharged.

i The battery has run out.

i The AC power adapter plug has come out

of the power outlet.

i The battery is loaded backward.

i The battery cover is not closed correctly.

The battery runs out.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The battery can no longer be recharged.

i No xD-Picture Card is inserted.

i The xD-Picture Card is full.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The Auto power off function has turned the

camera off.

i The battery has run out.

i The shutter button was pressed while the

flash was charging.

i The flash is not popped up.

i The Mode dial is set to “

” Landscape.

i Continuous shooting is selected.

The Mode dial is set to “

”, “

” or

“

”.

Continuous shooting is selected.

The Continuous shooting option is set to

“Long-period continuous shooting”.

The sensitivity is set to 800 (high-sensitivity

photography).

i The subject is too far away.

i Your finger was covering the flash/flash

control sensor.

i The lens is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without selecting

Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The picture was taken with a slow shutter

speed (long exposure) in a high-temperature

environment.

i Load the battery.

i Connect the camera and AC power

adapter correctly.

i Take the battery out briefly and then

reload it.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new or fully charged battery. If the

battery still fails to charge, contact your

FUJIFILM dealer.

i Load a new or fully charged battery.

i Plug the adapter back in.

i Load the battery in the correct direction.

i Close the battery cover correctly.

Load a new or fully charged battery.

i Put the battery in your pocket or another

warm place to heat it and then load it into

the camera just before you take a picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new or fully charged battery.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.

i Turn the camera on.

i Load a new or fully charged battery.

i Wait until the flash has finished charging

before pressing the shutter button.

i Pop up the flash.

i Change the Photography mode.

i Set continuous shooting to “OFF”.

The flash settings are restricted because the

camera settings are tailored to the scene

being shot. Change the Photography mode

for a wider range of flash settings.

Set continuous shooting to “OFF”.

Set the Continuous shooting option to

something other than “Long-period

continuous shooting”.

Set the sensitivity to 400 or less.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and does

not indicate a camera fault.

Troubleshooting Possible causes Solutions

Fujifilm Finepix F810 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info