Bedienungsanleitung Fujifilm Finepix M 603 (Seite 14 von 45) (Englisch)

101571

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

MACRO

(

CLOSE-UP

)

PHOTOGRAPHY

•

FLASH

MODE

Basic Photography

４９４９

Selecting Macro mode allows you to take close-

up shots.

1 Set the Mode switch to “q”.

2 Press the “e” Macro button. The “e” icon

appears on the screen indicating that you can

take close-up shots.

To cancel Macro mode, press the “e” Macro

button again.

●

Effective Photography Range:

Approx. 20 cm to 80 cm (7.9 in to 31.5 in.).

●

Macro photography is automatically cancelled in the

following situations:

• When you set the mode switch to a different mode.

• When you switch to “

U” or “W” modes.

• When the camera is switched off.

●

Select the appropriate Flash mode for the conditions.

●

If you are shooting in a dark location (when the “\”

camera shake warning icon is displayed), use a tripod to

prevent camera shake.

01 02

icon

z FLASH

You can choose from 5 flash modes according

to the type of shot.

1 Set the Mode switch to “q”.

2 The flash setting changes each time you

press the “z” Flash button. The last flash

mode displayed is selected.

Effective flash range (for U AUTO)

Wide-angle: Approx. 0.6 m to 4.0 m (2.0 ft. to 13.1 ft.)

Telephoto : Approx. 0.6 m to 3.0 m (2.0 ft. to 9.8 ft.)

●

If you use the flash in very dusty conditions or when it is

snowing, white dots may appear in the image due to the

flash reflecting off the dust particles or snowflakes. Try

taking the shot using Suppressed Flash mode.

●

The flash charging time may increase if the charge

remaining in the battery is low.

●

When you take a shot using the flash, you may see the

video image disappear and the screen go dark as the

flash charges. At the same time, the indicator lamp

flashes orange.

01 02

Text displayed

Framing Guideline

displayed

No text displayed

Optical zoom

Digital zoom

Zoom bar display

USING THE ZOOM

The digital zoom can be used with the “2”,

“1” and “!” quality mode setting.

●

The digital zoom cannot be used with the “3” setting.

●

See P.34, 43 for information on changing the quality

mode setting.

●

If the shot goes out of focus during zooming, hold the

shutter button down halfway to refocus the shot.

The position of the “■” indicator on the zoom bar

shows the zooming status.

h The section above the divider is the digital

zoom. The section below the divider is the

optical zoom.

h The “■” mark moves up and down when you

slide the zoom switch.

h When zooming switches between digital and

optical, the “■ ” indicator stops. Slide the

button further in the same direction to move

the “■” mark and switch zoom modes.

h Digital zoom focal lengths (35 mm camera equivalents)

2: Approx. 76 mm-106 mm, max. zoom scale: 1.4×

1: Approx. 76 mm-167 mm, max. zoom scale: 2.2×

!: Approx. 76 mm-334 mm, max. zoom scale: 4.4×

●

The optical zoom focal length is equivalent to approx. 38 mm-76 mm (35 mm camera equivalent).

This function can be selected in “q ” (Still

Photography) mode.

The display on the screen changes each time

the “DISP” button is pressed. Press the “DISP”

button until the framing guidelines appear.

●

The framing guideline is not recorded on the image.

●

The lines in the scene frame divide the recorded pixels

into 3 roughly equal parts horizontally and vertically.

When the image is printed, the resulting print may be

shifted slightly from the scene frame.

BEST FRAMING

◆

Important

◆

Scene

Use this frame with main subject positioned at the

intersection of two lines or align one of the horizontal

lines with the horizon.

This frame allows you to compose your own shots

while remaining aware of the subject's size and the

balance of the shot.

４９４９

Always use AF/AE lock when composing a shot. The image may not be focused correctly if you do

not use AE/AF lock.

e MACRO

(

CLOSE-UP

)

PHOTOGRAPHY

Continued over page...

◆

Increasing the screen (LCD monitor) brightness

◆

This is useful when you are checking the shot

composition for dimly lit scenes (Slow Synchro

shots, etc.). Hold down the “a” on the 4-direction

button before taking the shot to display the subject

more brightly on the screen.

●

This function is purely for checking the composition of

your shot. It does not increase the brightness of the

photographed image.

●

Even if you increase the brightness in low-light

conditions, you cannot check the subject.

●

You cannot use the other camera functions (shooting,

etc.) while the screen brightness is increased.

４９４９

ＬＣＤＩＳＢＲＩＧＨＴＥＮＥＤＬＣＤＩＳＢＲＩＧＨＴＥＮＥＤ

SHOOTING STILL IMAGES

(

U AUTO MODE

)

MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix M 603 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info