Bedienungsanleitung Fujifilm Finepix M 603 (Seite 21 von 45) (Englisch)

101571

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

ＩＳＯＩＳＯ

１６００１６００

１６０１６０

８００８００

４００４００

２００２００

This mode can be selected in the “W ”

photography mode.

Use this setting when you want to take bright

pictures indoors without using a flash or when

you want to use a fast shutter speed (to prevent

camera shake, etc.).

h Settings: 160, 200 (standard), 400, 800, 1600

●

While selecting a higher sensitivity setting will allow you

to take pictures in darker locations, it will also increase

the amount of speckling in your images.

Choose the sensitivity setting that best suits the

conditions.

When a high sensitivity (800 or 1600) is

selected, the quality is automatically set to “1”.

High-sensitivity photography (800 or 1600)

ＩＳＯＩＳＯ

１６００１６００

１６０１６０

８００８００

４００４００

２００２００

ＱＵＡＬＩＴＹＱＵＡＬＩＴＹ

４９４９

During high-sensitivity photography, “N” or

“M” appears on the screen.

●

While selecting a higher sensitivity setting will allow you

to take pictures in darker locations, it will also increase

the amount of speckling in your images.

Choose the sensitivity setting that best suits the

conditions.

High-sensitivity mode is cancelled and the camera settings revert to

the values current just before high-sensitivity mode was selected.

If the mode is changed to

again, the camera switches to high-

sensitivity mode and the camera settings change to the values set

when the sensitivity was specified.

Uses of changing to

The sensitivity setting remains unchanged at high sensitivity.

Setting the mode switch to

briefly and

then back to

Even if the camera is switched off, the sensitivity setting is saved

and the camera remains in high-sensitivity mode.

Switching the camera off

■ Camera settings for high-sensitivity photography

✽ Selecting U/W (➡P.32)

✽ Displaying the menus (➡P.32)

Advanced Features Photography

ＥＶＥＶ

０

＋０＋０

．

３

ー０ー０

．

３

ー０ー０

．

６

＋０＋０

．

６

This mode can be selected in the “W” photography

mode.

Use the Brightness setting to obtain the optimum

image brightness (exposure) when the subject is

much brighter or darker than the background.

hCorrection range: –2.1 EV to +1.5 EV

(13 levels in 0.3 EV steps)

See P.85 for more information on EV.

●

The Brightness setting is disabled in the following

situations:

• When the flash is used in Auto or Red-Eye

Reduction mode

• When dark scenes are shot in Forced Flash mode

◆

Subjects for Which Exposure Adjustment is Particularly Effective

◆

h Copying of printed text (black

characters on white paper) (+1.5 EV)

h Backlit portraits (+0.6 EV to +1.5 EV)

h Very bright scenes (such as snowfields)

and highly reflective subjects (+0.9 EV)

h Shots made up predominantly of sky.

(+0.9 EV)

h Spotlit subjects, particularly against

dark backgrounds (–0.6 EV)

h Copying of printed text (white

characters on black paper) (–0.6 EV)

h Scenes with low reflectivity, such as

shots of pine trees or dark foliage (–0.6

EV)

Guide to using + (positive) compensation

Guide to using – (negative) compensation

a WHITE BALANCE

(

SELECTING THE LIGHT SOURCE

)

ＷＨＩＴＥＢＡＬＡＮＣＥＷＨＩＴＥＢＡＬＡＮＣＥ

ＡＵＴＯＡＵＴＯ

AUTO: Automatic adjustment

(Shooting to show the ambience of

the light source)

: Shooting outdoors in fine weather

: Shooting in shade

This mode can be selected in the “

W ”

photography mode.

Change the white balance setting when you

want to take a picture with the white balance

fixed for the surroundings and lighting when the

picture is taken.

In AUTO mode, the correct white balance may

not be obtained for subjects such as close-ups

of people’s faces and shots taken under a

special light source. In such situations, select

the correct white balance for the light source.

See P.85 for information on the white balance.

✽ Selecting U/W (➡P.32)

✽ Displaying the menus (➡P.32)

L EV

(

EXPOSURE COMPENSATION

)

: Shooting under “Daylight” fluorescent

lamps

: Shooting under “Warm White” fluorescent

lamps

: Shooting under “Cool White” fluorescent

lamps

: Shooting in incandescent light

✽ When the flash fires, the white balance set for the flash is used. To achieve a particular desired effect,

set the flash mode to Suppressed Flash (➡P.28).

f SENSITIVITY

MODE

(

EXPOSURE COMPENSATION

)

•

WHITE BALANCE

(

SELECTING THE LIGHT SOURCE

)

MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix M 603 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info