Bedienungsanleitung Fujifilm Finepix Real 3D V1 (Seite 2 von 44) (Englisch)

540646

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

• Read Instructions: All the safety

and operating instructions

should be read before the ap-

pliance is operated.

• Retain Instructions: The safety

and operating instructions

should be retained for future

reference.

• Heed Warnings: All warnings on

the appliance and in the op-

erating instructions should

be adhered to.

• Follow Instructions: All oper-

ating and use instructions

should be followed.

Installation

Power Sources: This video prod-

uct should be operated only

from the type of power source

indicated on the marking label.

If you are not sure of the type

of power supply to your home,

consult your appliance dealer

or local power company. For

video products intended to

operate from battery power, or

other sources, refer to the op-

erating instructions.

Grounding or Polarization: This

video product is equipped with

a polarized alternating-current

line plug (a plug having one

blade wider than the other).

This plug will  t into the power

outlet only one way. This is a

safety feature. If you are unable

to insert the plug fully into the

outlet, try reversing the plug. If

the plug should still fail to  t,

contact your electrician to re-

place your obsolete outlet. Do

not defeat the safety purpose

of the polarized plug.

Alternate Warnings: This video

product is equipped with a

three-wire grounding-type

plug, a plug having a third

(grounding) pin. This plug will

only  t into a grounding-type

power outlet. This is a safety

feature. If you are unable to

insert the plug into the outlet,

contact your electrician to re-

place your obsolete outlet. Do

not defeat the safety purpose

of the grounding type plug.

Overloading: Do not overload

wall outlets and extension

cords as this can result in a risk

of  re or electric shock.

Ventilation: Slots and openings

in the cabinet are provided for

ventilation, to ensure reliable

operation of the video product

and to protect it from overheat-

ing, and these openings must

not be blocked or covered.

The openings should never be

blocked by placing the video

product on a bed, sofa, rug, or

other similar surface.

This video product should not

be placed in a built-in installa-

tion such as a bookcase or rack

unless proper ventilation is pro-

vided or the manufacturer’s in-

structions have been adhered

to. This video product should

never be placed near or over a

radiator or heat register.

Attachments: Do not use attach-

ments not recommended by

the video product manufactur-

er as they may cause hazards.

Water and Moisture: Do not use

this video product near wa-

ter—for example, near a bath

tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement,

or near a swimming pool, and

the like.

Power-Cord Protection: Power-

supply cords should be routed

so that they are not likely to be

walked on or pinched by items

placed upon or against them,

paying particular attention to

cords at plugs, convenience re-

ceptacles, and the point where

they exit from the appliance.

Accessories: Do not place this

video product on an unstable

cart, stand, tripod, bracket, or

table. The video product may

fall, causing serious injury to a

child or adult, and serious dam-

age to the appliance. Use only

with a cart, stand, tripod, brack-

et, or table recommended by

the manufacturer, or sold with

the video product. Any mount-

ing of the appliance should fol-

low the manufacturer’s instruc-

tions, and should use a

mounting accessory recom-

mended by the manufacturer.

An appliance

and cart

combina-

tion should

be moved

with care.

Quick stops,

excessive force, and uneven

surfaces may cause the appli-

ance and cart combination to

overturn.

Antennas

Outdoor Antenna Grounding: If an

outside antenna or cable sys-

tem is connected to the video

product, be sure the antenna

or cable system is grounded

so as to provide some protec-

tion against voltage surges and

built-up static charges. Section

810 of the National Electrical

Code, ANSI/NFPA No. 70, pro-

vides information with respect

to proper grounding of the

mast and supporting structure,

grounding of the lead-in wire

to an antenna discharge unit,

size of grounding conductors,

location of antenna discharge

unit, connection to grounding

electrodes, and requirements

for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground

Clamp

Electric

Service

Equipment

Ground

Clamps

Grounding

Conductors

(NEC SECTION

810-21)

Power Service Grounding

Electrode System (NEC

ART 250. PART H)

Antenna

Discharge

Unit (NEC

SECTION

810-20)

Power Lines: An outside antenna

system should not be located in

the vicinity of overhead power

lines or other electric light or

power circuits, or where it can

fall into such power lines or cir-

cuits. When installing an out-

side antenna system, extreme

care should be taken to keep

from touching such power

lines or circuits as contact with

them might be fatal.

Use

Cleaning: Unplug this video

product from the wall out-

let before cleaning. Do not

use liquid cleaners or aerosol

cleaners. Use a damp cloth for

cleaning.

Object and Liquid Entry: Never

push objects of any kind into

this video product through

openings as they may touch

dangerous voltage points or

short out parts that could re-

sult in a  re or electric shock.

Never spill liquid of any kind on

the video product.

Lightning: For added protection

for this video product receiver

during a lightning storm, or

when it is left unattended and

unused for long periods of

time, unplug it from the wall

outlet and disconnect the an-

tenna or cable system. This will

prevent damage to the video

product due to lightning and

power-line surges.

Service

Servicing: Do not attempt to ser-

vice this video product yourself

as opening or removing covers

may expose you to dangerous

voltage or other hazards. Refer

all servicing to quali ed service

personnel.

Damage Requiring Service: Unplug

this video product from the wall

outlet and refer servicing to

quali ed service personnel un-

der the following conditions:

• When the power-supply cord

or plug is damaged.

• If liquid has been spilled, or

objects have fallen into the

video product.

• If the video product has been

exposed to rain or water.

• If the video product has been

dropped or the cabinet has

been damaged.

If the video product does not

operate normally follow the

operating instructions. Ad-

just only those controls that

are covered by the operating

instructions as an improper ad-

justment of other controls may

result in damage and will often

require extensive work by a

quali ed technician to restore

the video product to its normal

operation.

When the video product ex-

hibits a distinct change in

performance—this indicates a

need for service.

Replacement Parts: When re-

placement parts are required,

be sure the service technician

has used replacement parts

speci ed by the manufacturer

or have the same character-

istics as the original part. Un-

authorized substitutions may

result in  re, electric shock or

other hazards.

Safety Check: Upon completion

of any service or repairs to this

video product, ask the service

technician to perform safety

checks to determine that the

video product is in proper op-

erating condition.

Fujifilm Finepix Real 3D V1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix Real 3D V1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info