Bedienungsanleitung Fujifilm Finepix Real 3D W3 (Seite 2 von 124) (Englisch)

510439

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

For Your Safety

• Read Instructions: All the safety and

operating instructions should be

read before the appliance is oper-

ated.

• Retain Instructions: The safety and

operating instructions should be

retained for future reference.

• Heed Warnings: All warnings on the

appliance and in the operating in-

structions should be adhered to.

• Follow Instructions: All operating

and use instructions should be fol-

lowed.

Installation

Power Sources: This video product

should be operated only from the

type of power source indicated on

the marking label. If you are not sure

of the type of power supply to your

home, consult your appliance dealer

or local power company. For video

products intended to operate from

battery power, or other sources, refer

to the operating instructions.

Grounding or Polarization: This video

product is equipped with a polar-

ized alternating-current line plug (a

plug having one blade wider than

the other). This plug will  t into the

power outlet only one way. This is a

safety feature. If you are unable to in-

sert the plug fully into the outlet, try

reversing the plug. If the plug should

still fail to  t, contact your electrician

to replace your obsolete outlet. Do

not defeat the safety purpose of the

polarized plug.

Alternate Warnings: This video

product is equipped with a 3-wire

grounding-type plug, a plug having

a third (grounding) pin. This plug will

only  t into a grounding-type power

outlet. This is a safety feature. If you

are unable to insert the plug into

the outlet, contact your electrician

to replace your obsolete outlet. Do

not defeat the safety purpose of the

grounding-type plug.

Overloading: Do not overload wall

outlets and extension cords as this

can result in a risk of  re or electric

shock.

Ventilation: Slots and openings in the

cabinet are provided for ventilation

and to ensure reliable operation of

the video product and to protect it

from overheating, and these open-

ings must not be blocked or cov-

ered.

The openings should never be

blocked by placing the video prod-

uct on a bed, sofa, rug, or other simi-

lar surface.

This video product should not be

placed in a built-in installation such

as a bookcase or rack unless proper

ventilation is provided or the man-

ufacturer’s instructions have been

adhered to.

This video product should never be

placed near or over a radiator or heat

Attachments: Do not use attachments

not recommended by the video

product manufacturer as they may

cause hazards.

Water and Moisture: Do not use this

video product near water – for ex-

ample, near a bath tub, wash bowl,

kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool,

and the like.

Power-Cord Protection: Power-Sup-

ply cords should be routed so that

they are not likely to be walked on

or pinched by items placed upon

or against them, paying particular

attention to cords at plugs, conve-

nience receptacles, and the point

where they exit from the appliance.

Accessories: Do not place this video

product on an unstable cart, stand,

tripod, bracket, or table. The video

product may fall, causing serious in-

jury to a child or adult, and serious

damage to the appliance. Use only

with a cart, stand, tripod, bracket, or

table recommended by the manu-

facturer, or sold with the video prod-

uct. Any mounting of the appliance

should follow the manufacturer’s in-

structions, and should use a mount-

ing accessory recommended by the

manufacturer.

An appliance

and cart com-

bination should

be moved with

care. Quick stops,

excessive force,

and uneven sur-

faces may cause the appliance and

cart combination to overturn.

Antennas

Outdoor Antenna Grounding:

If an

outside antenna or cable system is

connected to the video product, be

sure the antenna or cable system

is grounded so as to provide some

protection against voltage surges

and built-up static charges. Section

810 of the National Electrical Code,

ANSI/NFPA No. 70, provides informa-

tion with respect to proper grounding

of the mast and supporting struc-

ture, grounding of the lead-in wire

to an antenna-discharge unit, size of

grounding conductors, location of

antenna-discharge unit, connection

to grounding electrodes, and require-

ments for the grounding electrode.

IMPORTANT SAFETY INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix Real 3D W3 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info