Bedienungsanleitung Fujifilm finepix s 2 pro (Seite 13 von 65) (Englisch)

288584

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

24 25

SWITCHING ON AND OFF

•

SETTING THE DATE AND TIME

CHECKING THE BATTERY LEVEL

Getting Ready

To switch the camera on, set the Power switch

to “ON”.

To switch the camera off, set the Power switch

to “OFF”.

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＮＯＴＳＥＴＮＯＴＳＥＴ

ＳＥＴＳＥＴ ＮＯＮＯ

ＯＫＯＫ

ＢＡＣＫＢＡＣＫ

●

To set the date and time later, press the “BACK” button.

●

If you do not set the date and time, this confirmation

message will appear each time you switch the camera

on.

When you first switch the camera on, the date is

cleared. Press the “MENU/OK” button to set the

date and time.

1Unlock the 4-direction button.

2Press “d” or “c” to select year, month, day,

hour or minute and then press “a” or “b” to

adjust the selected setting.

1Press the “MENU/OK” button.

This switches the camera to Photography

mode.

2When you have finished the procedure, lock

the 4-direction button to prevent accidental

improper use.

●

To set the time precisely, press the “MENU/OK” button

when the time is at zero seconds.

●

Once the AC power adapter has been connected or the

batteries have been loaded for 2 days or more, the date

and time settings will be retained for roughly 6 months

even when the camera has no power (batteries removed

and AC power adapter disconnected).

●

If you hold down “a ” or “b ”, the numbers change

continuously.

●

When the time displayed passes “12:00:00”, the AM/PM

setting automatically switches.

01 02

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

２００２２００２．０２．１５．０２．１５

１１：５９：５９ＰＭ１１：５９：５９ＰＭ

ＯＫＯＫ

ＢＡＣＫＢＡＣＫ

01 02

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

２００２．０２．１５２００２．０２．１５

１１：１１：５９５９：５９ＰＭ：５９ＰＭ

ＯＫＯＫ

ＢＡＣＫＢＡＣＫ

Switch the camera on and check the battery charge indicator.

1There is ample charge in the batteries.

2The batteries are low on charge and will run out shortly. You should replace the batteries.

3The batteries are fully depleted. You must replace the batteries. The display switches off and

the camera stops operating, after which the display lights again.

Loss of power while an image is being saved will prevent the image from being saved successfully.

Take note of the battery level when you are taking shots where image saving will take some time

(continuous shooting or when the quality is set to “HIGH”).

Lithium batteries (Top display panel)

◆

Auto Power Off Function

◆

AA-size batteries (Rear display panel)

Blinking

Lit

Blinking

Lit

■ Batteries Uses and Symptoms When Batteries are Depleted

■ When you have difficulty obtaining lithium batteries

Uses Symptoms When Depleted

AA-size Alkaline batteries Image processing

“

∞

” appears on the top display panel

Lithium batteries CR123A Power functions such as auto focus,

aperture, mirror and shutter operation,

and charge the flash.

The camera will not switch on.

You can take pictures using only the four AA-size Ni-MH (nickel-metal hydride batteries), but the

built-in flash cannot be used. When you are using only the four AA-size Ni-MH batteries, remove

the used lithium batteries from the camera.

The time for which the camera can be used is shorter, and as far as possible this should only be

used as an emergency measure. Note that the displays on the top and rear display panels both

function as battery level indicators for the AA-size Ni-MH batteries.

✽ When you are taking pictures in locations where you think you will have difficulty purchasing lithium batteries, it is a

good idea to take along some spare lithium batteries or carry some fully charged Ni-MH batteries for emergencies.

✽ The camera cannot be used just with alkaline batteries.

If you leave the camera switched on without using it, this function automatically switches the

camera off (➡P.98).

If the Auto Power Off function has shut down the camera, restore power to the camera by pressing

the shutter button down halfway or pressing the LCD illuminator button. A small amount of battery

charge is consumed even when Auto Power Off has shut down the camera.

1Press the “MENU/OK” button to display the SET–UP screen.

2Use “a” or “b” to select “DATE/TIME” and then press “c”.

To correct the date/time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm finepix s 2 pro Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info