Bedienungsanleitung Fujifilm Finepix S1700 serie (Seite 2 von 140) (Englisch)

510424

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

• Read Instructions: All the safety and op-

erating instructions should be read

before the appliance is operated.

• Retain Instructions: The safety and

operating instructions should be

retained for future reference.

• Heed Warnings: All warnings on the

appliance and in the operating in-

structions should be adhered to.

• Follow Instructions: All operating and

use instructions should be followed.

Installation

Power Sources: This video product

should be operated only from the

type of power source indicated on

the marking label. If you are not sure

of the type of power supply to your

home, consult your appliance dealer

or local power company. For video

products intended to operate from

battery power, or other sources, refer

to the operating instructions.

Grounding or Polarization: This video

product is equipped with a polar-

ized alternating-current line plug (a

plug having one blade wider than

the other). This plug will  t into the

power outlet only one way. This is a

safety feature. If you are unable to

insert the plug fully into the outlet,

try reversing the plug. If the plug

should still fail to  t, contact your

electrician to replace your obsolete

outlet. Do not defeat the safety pur-

pose of the polarized plug.

Alternate Warnings: This video prod-

uct is equipped with a three-wire

grounding-type plug, a plug having

a third (grounding) pin. This plug

will only  t into a grounding-type

power outlet. This is a safety feature.

If you are unable to insert the plug

into the outlet, contact your electri-

cian to replace your obsolete outlet.

Do not defeat the safety purpose of

the grounding type plug.

Overloading: Do not overload wall out-

lets and extension cords as this can

result in a risk of  re or electric shock.

Ventilation: Slots and openings in

the cabinet are provided for ventila-

tion, to ensure reliable operation of

the video product and to protect it

from overheating, and these open-

ings must not be blocked or cov-

ered. The openings should never

be blocked by placing the video

product on a bed, sofa, rug, or other

similar surface.

This video product should not be

placed in a built-in installation such

as a bookcase or rack unless proper

ventilation is provided or the manu-

facturer’s instructions have been ad-

hered to. This video product should

never be placed near or over a radia-

tor or heat register.

Attachments: Do not use attachments

not recommended by the video

product manufacturer as they may

cause hazards.

Water and Moisture: Do not use this

video product near water—for ex-

ample, near a bath tub, wash bowl,

kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool,

and the like.

Power-Cord Protection: Power-sup-

ply cords should be routed so that

they are not likely to be walked on

or pinched by items placed upon

or against them, paying particular

attention to cords at plugs, conve-

nience receptacles, and the point

where they exit from the appliance.

Accessories: Do not place this video

product on an unstable cart, stand,

tripod, bracket, or table. The video

product may fall, causing serious in-

jury to a child or adult, and serious

damage to the appliance. Use only

with a cart, stand, tripod, bracket, or

table recommended by the manufac-

turer, or sold with the video product.

Any mounting of the appliance should

follow the manufacturer’s instructions,

and should use a mounting accessory

recommended by the manufacturer.

An appliance and

cart combination

should be moved

with care. Quick

stops, excessive

force, and uneven

surfaces may

cause the appliance and cart combi-

nation to overturn.

Antennas

Outdoor Antenna Grounding: If an

outside antenna or cable system is

connected to the video product, be

sure the antenna or cable system is

grounded so as to provide some pro-

tection against voltage surges and

built-up static charges. Section 810

of the National Electrical Code, ANSI/

NFPA No. 70, provides information

with respect to proper grounding

of the mast and supporting struc-

ture, grounding of the lead-in wire

to an antenna discharge unit, size of

grounding conductors, location of

antenna discharge unit, connection

to grounding electrodes, and require-

ments for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground

Clamp

Electric

Service

Equipment

Ground

Clamps

Grounding

Conductors

(NEC SECTION

810-21)

Power Service Grounding

Electrode System (NEC

ART 250. PART H)

Antenna

Discharge

Unit (NEC

SECTION

810-20)

Power Lines: An outside antenna sys-

tem should not be located in the

vicinity of overhead power lines or

other electric light or power circuits,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S1700 serie Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix S1700 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info