Bedienungsanleitung Fujifilm finepix s3 pro (Seite 68 von 73) (Englisch)

287886

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

RemedyExplanation

LCD monitor

Warning Displayed

The camera is not connected to PC

or printer.

i Check that the USB cable is connected

correctly.

i Check that your printer is turned on.

Displayed for PictBridge.

This message appears when printing is

performed from a FUJIFILM printer that

supports PictBridge. Refer to the Owner’s

Manual for the printer for details.

An attempt was made to use DPOF

printing for a RAW image file.

DPOF printing cannot be used with RAW

image files.

An attempt was made to trim a 1M

image or an image shot using the

RAW setting.

The image cannot be trimmed.

i An attempt was made to trim an

image shot using a camera other

than FinePix S3 Pro.

i The image is damaged.

The image cannot be trimmed.

Prints were specified for 1000 or

more frames in the DPOF frame

settings.

The maximum number of frames for which

prints can be specified on the same

media

is 999.

Copy the images for which you want to

order prints onto another media and then

specify the DPOF settings.

135134

Warning Displays

eThe table below lists the warning that are displayed on the

LCD monitor.

Warning Displayed

LCD monitor

Explanation Remedy

(lit)

The batteries are flat. Replace the batteries.

(blinking)

The batteries are low on charge. Have replacement batteries ready.

Warning Displayed

Rear display panel

Explanation Remedy

eThe table below lists the warnings that are displayed on the rear display panel.

No media is inserted.

Insert a media.

i The media is not formatted.

i The media contact area is soiled.

i Camera fault.

i Format the media on the camera.

i Wipe the contact area on the media with

a soft dry cloth. It may be necessary to

format the media. If the message still

appears, replace the media.

i Contact your FUJIFILM dealer.

The media is full. Erase some images or use a media that

has ample free space.

i The played back file was not

recorded correctly.

i The media contact area is soiled.

i Camera fault.

i Images cannot be played back.

i Wipe the contact area on the media with

a soft dry cloth. It may be necessary to

format the media. If the message still

appears, replace the media.

i Contact your FUJIFILM dealer.

The frame number has reached

999–9999.

1 Insert a formatted media into the

camera.

2 Set “RENEW” as the FRAME NO.

setting in the “SET-UP” menu.

3 Start taking pictures (The frame

numbers start from “100-0001”).

4 Set “CONT.” as the FRAME NO.

setting in the “SET-UP” menu.

i The data could not be recorded due

to a media error or a connection

error between the media and

camera.

i The image cannot be recorded as it

is too large to fit in the available

space on the media.

i Re-insert the media or turn the camera

off and then on again. If the message

still appears, contact your FUJIFILM

dealer.

i Use a new media.

A protected file was encountered. Protected files cannot be erased. Remove

the protection.

i The media contact area is soiled.

i The media is damaged.

i The media format is incorrect.

i Camera fault.

i Wipe the contact area on the media with

a soft dry cloth. It may be necessary to

format the media. If the message still

appears, replace the media.

i Contact your FUJIFILM dealer.

Displayed for PictBridge.

i Check that the printer is not out of paper

or out of ink.

i Turn the printer off briefly and then turn

it back on.

i Refer to the user manual supplied with

your printer.

Displayed for PictBridge.

Check that the printer is not out of paper

or out of ink. Printing automatically

restarts when the error is cleared. If the

message still appears after checking,

press the “MENU/OK” button to restart

printing.

Displayed for PictBridge.

i Refer to the user manual for the printer

being used and check whether the

printer supports the JFIF-JPEG or Exif-

JPEG image format. If not, the printer

cannot print the images.

i Was the image data photographed

using FinePix S3 Pro?

You may not be able to print some

images photographed on other

cameras.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm finepix s3 pro Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info