Bedienungsanleitung Fujifilm Finepix S3 Pro (Seite 33 von 73) (Englisch)

510440

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

64 65

Advanced Photography

Use auto exposure bracketing when you want to take the same shot with different exposure

settings. Using the correct exposure setting displayed by the camera (the value set in “M” exposure

mode) as a reference, the camera can automatically offset the exposure by a set value (up to ±2 EV

steps without exposure compensation) in either direction.

Hold down the “

c” button 1 as you turn Main-

command dial 2 to display the “Q” icon on the

top display panel.

h The “

d ” icon continues to flash while auto

exposure bracketing is being used to indicate that

auto exposure bracketing photography is in

progress.

Hold down the “c” button 1 as you turn Sub-

command dial 2 to set the number of shots (up to

3) and the exposure offset (up to ±2 EV steps in

1/2 EV step increments).

■ List of exposure offsets and numbers of shots

Number of shots and

compensated EV value

Bracketing bar graph Bracketing order

0, –0.5, +0.5

0, –1.0, +1.0

0, –1.5, +1.5

0, –2.0, +2.0

0, +0.5

0, +1.0

0, +1.5

0, +2.0

0, –0.5

0, –1.0

0, –1.5

0, –2.0

01 02

●

Check the number of available shots before setting the

number of shot.

Compose picture, focus and shoot. A bracketing bar graph in the top display panel shows the

photography status each time a shot is taken.

h When three shots are to be taken, “ ” is shown before shooting begins, “ ”

appears after the first shot, “ ” appears after the second shot, and the bar graph

disappears when shooting is completed.

h If you hold the shutter button down when the “

.” (Continuous shooting) release mode is

selected, shooting automatically stops when the specified number of shots has been taken.

Note that shots are taken one frame at a time when the built-in flash is used.

h If the exposure compensation function (➡P.63) or flash exposure compensation (➡P.73) is

also set, Auto Exposure Bracketing will be combined with the exposure compensation values.

It is useful to perform Auto Exposure Bracketing with a compensated value of over +2 EV or

under –2 EV.

h To cancel the Auto Exposure Bracketing, rotate the Main-command dial while pressing the

“c” button so “Q” disappears from the top display panel or perform Two-Button Reset

(➡P.109). The number of shots and compensated EV values previously selected will remain

when they are cancelled with the Main-command dial, and they automatically reset to

“” when the Two-Button Reset is performed.

CSM 1: Bracketing order can be set to change from negative EV value to positive EV value

(➡P.111).

●

The Auto Exposure Bracketing settings are canceled when the live image is displayed. Wait until live image display is

finished before specifying the Auto Exposure Bracketing settings.

c AUTO EXPOSURE BRACKETING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S3 Pro Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info