Bedienungsanleitung Fujifilm Finepix S3500 (Seite 32 von 51) (Englisch)

101591

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Settings

FRAME NO.

Specifies whether frame numbers are assigned

consecutively from previous numbers or begin

again.

CONT.: Pictures are stored beginning from the

highest file number stored on the last xD-

Picture Card used.

RENEW: Pictures are stored on each xD-Picture

Card beginning with a file number “0001”.

Setting this function to “CONT.” makes file

management easier as it makes sure that file

names are not duplicated when images are

downloaded to a PC.

●

When the camera settings are “q RESET”, the frame

number setting (“CONT.” or “RENEW”) is changed to

“CONT.” and the frame number itself does not return to

“0001”.

●

When the xD-Picture Card already contains image files with

file numbers higher than the highest file number on the last

xD-Picture Card, images are stored beginning from the

highest file number on the current xD-Picture Card.

Check the file number by viewing the image. The

last 4 digits of the 7-digit number in the top right

corner of the screen are the file numbers, while the

first 3 digits show the directory number.

●

When changing the xD-Picture Card, always turn the

camera off before opening the battery cover. Opening the

battery cover without turning the camera off may cause the

frame number memory to not function.

●

File number runs from 0001 to 9999. Once 9999 is exceeded,

the directory number changes from 100 to 101. The

maximum number is 999–9999.

●

The displayed frame number may differ for images

photographed on other cameras.

●

When “t” appears, see P.89.

File number

Directory number

Frame number

１００−９９９９１００−９９９９

７／２３／２００２３／２００４３：００ＰＭ３：００ＰＭ

CONT. RENEW

Formatted xD-Picture Card used for

both A and B.

Always press the “MENU/OK” button after the

settings are completed.

When the Photography mode is selected with world

time set, “ß” appears on the screen for 3 seconds.

７／７／２３２３／２００２００４

１６１６Ｎ

SET-UP

1Press “a” or “b” to select “TIME DIFFERENCE”.

2Press “c”.

WORLD TIME

(

TIME DIFFERENCE

)

This function sets a time difference relative to the date and time currently set. When this setting is

enabled, the specified time difference is applied when pictures are taken.

Use this function when traveling to destinations in different time zones.

Press “d” or “c” to change between “å HOME”

and “ß LOCAL”.

To set the time difference, select “ß LOCAL”.

å HOME: Your home time zone

ß LOCAL: Your destination time zone

1Press “d” or “c” to select +/–, hour and minute.

2Press “a” or “b” to correct the setting.

h Available time settings

–23:45 to +23:45 (in 15-minute increments)

01 02

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＳＥＴＳＥＴ

ＴＩＭＥＤＩＦＦＥＲＥＮＣＥＴＩＭＥＤＩＦＦＥＲＥＮＣＥ

ＨＯＭＥＨＯＭＥＬＯＣＡＴＩＯＮＬＯＣＡＴＩＯＮ

ＴＩＭＥＤＩＦＦＥＲＥＮＣＥＴＩＭＥＤＩＦＦＥＲＥＮＣＥ

７／２３／２００２３／２００４１０：３０ＡＭ１０：３０ＡＭ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＳＥＴＳＥＴ

ＴＩＭＥＤＩＦＦＥＲＥＮＣＥＴＩＭＥＤＩＦＦＥＲＥＮＣＥ

ＬＯＣＡＬＬＯＣＡＬ

ＬＯＣＡＴＩＯＮＬＯＣＡＴＩＯＮ

ＴＩＭＥＤＩＦＦＥＲＥＮＣＥＴＩＭＥＤＩＦＦＥＲＥＮＣＥ

７／２３／２００２３／２００４１０：３０ＡＭ１０：３０ＡＭ

01 02

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＴＩＭＥＤＩＦＦＥＲＥＮＣＥＴＩＭＥＤＩＦＦＥＲＥＮＣＥ

＋

００：００：００００

７／２３／２００

２３／２００４１０：３０ＡＭ１０：３０ＡＭ

Upon returning from a trip, always change the

World time setting back to “

å HOME”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S3500 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info