Bedienungsanleitung Fujifilm Finepix S3500 (Seite 47 von 51) (Englisch)

101591

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

9392

Frame erase does not

erase the frame.

The ERASE ALL

function does not erase

all the frames.

Nothing happens when I

use the Mode dial.

Screens are not

displayed in English.

There is no image on

the TV.

The TV image is black

and white.

When the camera is

connected to a PC, the

photographed image or

playback image appears

on the camera’s screen.

The camera no longer

works correctly.

Can’t print with

PictBridge.

The camera was

connected to PC when

the USB mode was set

to “

”.

Some frames may be protected.

i Camera malfunction.

i The batteries have run out.

i A language other than English is selected

in the “ ” setting in the “SET-UP”

menu (➡P.60).

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The video output setting is incorrect.

i The USB cable (included) is not correctly

connected to the PC or camera.

i The PC is not turned on.

The camera has suffered an unforeseen

problem.

“

” is not selected in USB mode in the

“SET-UP” menu.

Unprotect frames using the camera on

which the protection was first applied.

i Briefly remove the batteries or disconnect

the AC power adapter. Then reload the

batteries or reconnect the AC power

adapter and try again.

i Load new or fully charged batteries.

1Press the “MENU/OK” button to display

the menu on the screen.

2Press “d” or “c” to select “

” and press

“a” or “b” to select “SET-UP”. Press the

“MENU/OK” button to display the SET-UP

screen on the screen.

3Press “d” or “c” to move to option 3 and

then use “a” or “b” to select “”.

4Press “d” or “c ” several

times to select “ENGLISH”.

5Press the “MENU/OK” button.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

i Change the setting to “NTSC” or “PAL”

(➡P.60).

i Change the setting to “NTSC” or “PAL”

(➡P.60)

i Set up the camera and the USB cable

(included) correctly.

i Turn the PC on.

Briefly remove the batteries or disconnect

the AC power adapter. Then reload the

batteries or reconnect the AC power adapter

and try again. If the message still appears,

contact your FUJIFILM dealer.

Select “

” in USB mode in the “SET-UP”

menu.

Perform steps 1 to 3 to remove the

camera from PC.

h Windows

1 The “New Hardware Found” wizard (or

“Scanner and Camera” wizard) appears.

If the wizard does not appear, proceed to

step 3.

2 Click the [Cancel] button.

3 Disconnect the camera from the PC.

h Macintosh

1 The window for locating the driver

appears. If the window does not appear,

proceed to step 3.

2 Click the [Cancel] button.

3 Disconnect the camera from the

Macintosh.

Troubleshooting

eIf you think the camera is faulty, check the following once more.

Troubleshooting Possible causes Solutions

Specifications

System

Model Digital camera FinePix S3100 / FinePix S3500

Effective pixels 4.0 million pixels

CCD 1/2.7 inch square pixel CCD

Number of total pixels: 4.23 million pixels

Number of recorded pixels Still image: 2272 × 1704 pixels/1600 × 1200 pixels/1280 × 960 pixels/

640 × 480 pixels (

)

Movie: 320 × 240 pixels (10 frames per second without sound)

160 × 120 pixels (10 frames per second without sound)

Storage media xD-Picture Card (16/32/64/128/256/512 MB)

File format Still image: JPEG (Exif ver. 2.2)

✽ Design rule for Camera File System compliant DPOF compatible

Movie: AVI format, Motion JPEG

Lens Fujinon 6 × optical zoom lens, F2.8-F3.0

Aperture F2.8 to F3.0 (automatically selected)

Focal length f=6.0 mm to 36 mm

(Equivalent to 39 mm to 234 mm on a 35 mm camera)

Focal range Normal: Approx. 0.8 m (2.6 ft.) to infinity

Macro: Approx. 0.1 m (3.9 in.) to 0.8 m (2.6 ft.)

Shutter speed 2 sec. to 1/1500 sec. (combined with mechanical shutter)

Focus TTL contrast-type, Auto focus

Sensitivity Equivalent to ISO 100 (automatically set between ISO 64 – 250 depend on

the shooting mode and subject.)

Photometry TTL 64-zones metering

Exposure control Program AE

Exposure compensation –2.1 EV to +1.5 EV in 0.3-step increments (in Manual mode)

White balance Auto (

B), Scene position (m)

Manual modes, 7 positions can be selected

Viewfinder 0.33 inches 110,000 pixels electronic viewfinder

NTSC Approx. 88% coverage PAL Approx. 86% coverage

LCD monitor 1.5 inches, 60,000 pixels amorphous silicon TFT,

NTSC: Approx. 87% coverage, PAL: Approx. 85% coverage

Flash type Auto flash using flash control sensor

Effective range:

Wide-angle: Approx.

0.8

m to 3.5 m (

2.6

ft. to 11.5 ft.)

(Approx. 0.3 m to

0.8

m (1.0 ft. to

2.6

ft.): Macro)

Telephoto: Approx. 0.8 m to

3.5

m (2.6 ft. to

11.5

ft.)

Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,

Slow Synchro

✽

, Red-Eye Reduction + Slow Synchro

✽

✽ In Manual mode

Self-Timer 10 sec.

Video output NTSC/PAL selectable

Input/Output Terminals

Video output socket

2.5 mm dia. jack

(USB) socket

For file transfer to a computer

DC Input

Socket for specified AC power adapter AC-5VH/AC-5VHS (sold separately)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S3500 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info