Bedienungsanleitung Fujifilm FINEPIX S4500 Serie (Seite 7 von 147) (Englisch)

519183

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

vii

For Your Safety

• Do not store batteries in warm or

humid places.

• Keep the batteries out of reach of

babies and small children.

• Make sure that the battery polarity

(C and D) is correct.

• Do not use new with used batter-

ies. Do not use charged and dis-

charged batteries together.

• Do not use different types or

brands of batteries at the same

time.

• If you do not intend to use the

camera for a long period of time,

remove the batteries from the

camera. Note if the camera is left

with the batteries removed, the

time and date settings are cleared.

• The batteries feel warm right af-

ter being used. Before removing

the batteries, turn the camera off

and wait for the batteries to cool

down.

• Since batteries do not work well in

cold weather or locations, warm

the batteries by placing them in-

side your garments before use.

Batteries do not work well when

cold. They will work again when

the temperature returns to normal.

• Soil (such as fingerprints) on the

battery terminals makes the bat-

teries charge less reducing the

number of images. Carefully wipe

the battery terminals with a soft

dry cloth before loading.

If any liquid at all leaks from

the batteries, wipe the battery

compartment thoroughly and

then load new batteries.

If any battery fluid comes into

contact with your hands or

clothing, flush the area thor-

oughly with water. Note that

battery fluid can cause loss

of eyesight if it gets into your

eyes. If this occurs, do not rub

your eyes. Flush the fluid out

with clean water and contact

your physician for treatment.

■ Using the AA-size Ni-MH batteries

correctly

• Ni-MH batteries left unused in

storage for long periods can be-

come “deactivated”. Also, repeat-

edly charging Ni-MH batteries

that are only partially discharged

can cause them to suffer from the

“memory effect”. Ni-MH batteries

that are “deactivated” or affected

by “memory” suffer from the prob-

lem of only providing power for a

short time after being charged. To

prevent this problem, discharge

and recharge them several times

using the camera’s “Discharging

rechargeable batteries” function.

Deactivation and memory are spe-

cific to Ni-MH batteries and are not

in fact battery faults.

See Owner’s Manual for the proce-

dure for “Discharging rechargeable

batteries”.

CAUTION

Do not use the “Discharging re-

chargeable batteries” function when

alkaline batteries being used.

• To charge Ni-MH batteries, use the

quick battery charger (sold sepa-

rately). Refer to the instructions

supplied with the charger to make

sure that the charger is used cor-

rectly.

• Do not use the battery charger to

charge other batteries.

• Note that the batteries feel warm

after being charged.

• Due to the way the camera is con-

structed, a small amount of current

is used even when the camera is

turned off. Note in particular that

leaving Ni-MH batteries in the

camera for a long period will over-

discharge the batteries and may

render them unusable even after

recharging.

• Ni-MH batteries will self-discharge

even when not used, and the time

for which they can be used may be

shortened as a result.

• Ni-MH batteries will deteriorate

rapidly if over-discharged (e.g.

by discharging the batteries in a

flashlight). Use the “Discharging re-

chargeable batteries” function pro-

vided in the camera to discharge

the batteries.

• Ni-MH batteries have a limited

service life. If a battery can only

be used for a short time even after

repeated discharge-charge cycles,

it may have reached the end of its

service life.

■ Disposing of Batteries

• When disposing of batteries, do

so in accordance with your local

waste disposal regulations.

Notes on both models (

)

■

AC Power Adapter

Always use the AC Power Adapter

with the camera. The use of an AC

Power adapter other than FUJIFILM

AC Power Adapter can be damaged

to your digital camera.

For details on the AC power adapter,

refer to the Owner’s Manual of your

camera.

• Use the AC power adapter for in-

door use only.

• Plug the connection cord plug se-

curely into the DC input terminal.

• Turn off the FUJIFILM Digital cam-

era before disconnecting the cord

from the DC input terminal. To dis-

connect, pull out the plug gently.

Do not pull on the cord.

• Do not use the AC power adapter

with any device other than your

camera.

• During use, the AC power adapter

will become hot to the touch. This

is normal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm FINEPIX S4500 Serie Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm FINEPIX S4500 Serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info