Bedienungsanleitung Fujifilm Finepix S5200 (Seite 63 von 71) (Englisch)

8330

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

124 125

Troubleshooting Possible causes Solutions

Troubleshooting eIf you think the camera is faulty, check the following once more.

No power.

Power cuts out during

operation.

Batteries run out quickly.

No photograph is taken

when the shutter button

is pressed.

Cannot use the flash.

Cannot pop up the

flash.

The flash settings are

restricted and cannot be

selected.

The playback image is

dark even though the

flash was used.

The image is blurred.

There is speckling on

the image.

i The batteries have run out.

i The AC power adapter plug has come out

of the power outlet.

i The batteries are loaded backwards.

i The battery cover is not closed correctly.

i The camera has been left for a long period

with batteries and AC power adapter

removed.

The batteries have run out.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The batteries can no longer be recharged.

i The rechargeable batteries (if used) have

become deactivated, or the battery

capacity has diminished due to the

memory effect.

i No xD-Picture Card is inserted.

i The xD-Picture Card is full.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The Auto power off function has turned the

camera off.

i The batteries have run out.

i The shutter button was pressed while the

flash was charging.

i The batteries have run out.

i Photography mode is set to “

” or “

”.

i Continuous shooting is selected.

i The flash is set to “

” Suppressed flash

mode.

i The flash is set to “

” Suppressed flash

mode.

i The shooting condition is bright enough

not to need flash.

The Photography mode is set to “

”,

“

√

”, “

” or “

”.

i The subject is too far away.

i Your finger was covering the flash.

i The lens is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without selecting

Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The picture was taken with a slow shutter

speed (long exposure) in a high-temperature

environment.

i Load new or fully charged batteries.

i Plug the adapter back in.

i Load the batteries in the correct direction.

i Close the battery cover correctly.

i Load the batteries or connect the AC

power adapter, and wait a short time

before turning the camera on.

Load new or fully charged batteries.

i Put the batteries in your pocket or another

warm place to heat them and then load

them into the camera just before you take

a picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Load new or fully charged batteries.

i Use the rechargeable battery discharging

function to restore the rechargeable

batteries to full capacity.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.

i Turn the camera on.

i Load new or fully charged batteries.

i Wait until the charging is completed before

pressing the shutter button.

i Load new or fully charged batteries.

i Change the Photography mode.

i Set continuous shooting to “OFF”.

i Set to another flash mode excluding the

“

” Suppressed flash mode.

i Set to another flash mode excluding the

“

” Suppressed flash mode.

i Set to “

” Forced flash mode when you

want to take pictures with flash.

The flash settings are restricted because the

camera settings are tailored to the scene

being shot. Change the Photography mode

for a wider range of flash settings.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock or “MF” Manual focus

mode to take the picture.

This is a characteristic of CCDs and does

not indicate a camera fault.

Warning Displays

Warning Displayed Explanation Remedy

An attempt was made to show 5,000 or

more images by date sorting.

No more than 4,999 images can be shown by

date sorting.

i A protected file was encountered.

i An attempt was made to add a voice

memo to protected file.

i An attempt was made to rotate a

protected file.

i Protected files cannot be erased. Remove the

protection.

i Protected files cannot be added to voice

memos. Remove the protection.

i Protected files cannot be rotated. Remove the

protection.

i The voice memo file is faulty.

i Camera fault.

i The voice memo cannot be played back.

i Contact your FUJIFILM dealer.

i An attempt was made to trim an image

shot using a camera other than FinePix

S5200 / FinePix S5600.

i The image is damaged.

The image cannot be trimmed.

Prints were specified for 1000 or more

frames in the DPOF frame settings.

The maximum number of frames for which prints

can be specified on the same xD-Picture Card is

999.

Copy the images for which you want to order

prints onto another xD-Picture Card and then

specify the DPOF settings.

TOO MANY FRAMES

t ERROR

CAN NOT TRIM

` CAN NOT TRIM

≤ CAN NOT TRIM

DPOF FILE ERROR

PROTECTED FRAME

An attempt was made to trim a 0.3M image

or an image shot with the RAW setting.

The image cannot be trimmed.

An attempt was made to specify DPOF

settings for an image that is not supported

by DPOF.

DPOF printing cannot be used with this image

format.

CAN NOT SET DPOF

≤ CAN NOT SET DPOF

r CAN NOT SET DPOF

Displayed for PictBridge. This message appears when printing is performed

from a FUJIFILM printer that supports PictBridge.

Refer to the Owner’s Manual for the printer for

details.

The camera is not connected to a PC or

printer.

i Check that the USB cable (mini-B) is connected

correctly.

i Check that your printer is turned on.

Displayed for PictBridge.

i Check that the printer is not out of paper or out

of ink.

i Turn the printer off briefly and then turn it back

on.

i Refer to the user manual supplied with your

printer.

Displayed for PictBridge. Check that the printer is not out of paper or out of

ink. Printing automatically restarts when the error

is cleared. If the message still appears after

checking, press the “MENU/OK” button to restart

printing.

Displayed for PictBridge.

i Refer to the user manual for the printer being

used and check whether the printer supports the

JFIF-JPEG or Exif-JPEG image format. If not,

the printer cannot print the images.

i Movie and CCD-RAW images cannot be

printed.

i Was the image data photographed using

FinePix S5200 / FinePix S5600?

You may not be able to print some images

photographed on other cameras.

COMMUNICATION

ERROR

PRINTER ERROR

RESUME?

CANNOT BE PRINTED

u PRINTING

An attempt was made to rotate a movie. These images cannot be rotated by image

formats.

r CAN NOT ROTATE

Fujifilm Finepix S5200 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info