Bedienungsanleitung Fujifilm Finepix S9000 (Seite 19 von 73) (Englisch)

510418

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

36 37

Advanced Features

FOCUSING

(

DISTANCE

)

PHOTOGRAPHY FUNCTIONS

Advanced

Features

The distance from the subject to the camera is referred to as the shooting distance.

When the shooting distance is set correctly and the image appears sharp, the image is focused.

■ Three focusing methods

The mechanisms for focusing are S-AF (Single AF), C-AF (Continuous AF) and MF (Manual focus).

S-AF: Use S-AF for normal photography. In this mode, the camera focuses each time the shutter

button is pressed down halfway. Select the AF mode

(➡P.68) when the Mode dial is set to

“N”, “M”, “<” or “>” mode.

C-AF: Use C-AF to photograph moving subjects. When this mode is set, the camera focuses

continuously on the subject in the center of the screen. See P.48 for details.

MF: The focus is adjusted by turning the focusing ring manually. See P.49 for details.

◆

The AF sensor

◆

The FinePix S9000 / FinePix S9500 uses an external AF sensor (external-light passive phase

difference AF) that features faster AF operation than previous models. The external AF sensor does not

function when Macro mode, Super macro mode, the digital zoom, AREA or C-AF focusing is used. It

may take longer to focus if the external AF sensor is soiled (➡P.132).

■ Causes of focusing errors and the solutions

The subject is not suited to AF.

Use AF lock (AF mode: AF (CENTER)) ✽1 or MF.

The subject is not in the AF frame.

Use AF lock (AF mode: AF (CENTER)) ✽1 or MF.

The subject is outside the shooting range.

Turn Macro mode on or off ✽2.

The subject is moving too quickly. Use MF (pre-setting the shooting distance for a shot )

Cause Solution

✽1 Taking pictures using AF lock

◆

Subjects not suitable for autofocus

◆

h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass

h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects

h Fast moving subjects

h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is

either closer or further away than your subject

(such as a shot of someone against a

background with strongly contrasting

elements)

Press the shutter button down halfway to focus.

Recompose the shot and take the picture.Capture the main subject

in the center of screen

Main subject

✽2 Turning Macro mode ON/OFF

Macro OFF Macro ON Super macro ON

Wide-angle:

Approx. 50 cm (1.6 ft.) - infinity

Telephoto:

Approx. 2 m (6.6 ft.) - infinity

Wide-angle: Approx.10 cm-3 m

(3.9 in.-9.8 ft.)

Telephoto: Approx.90 cm-3 m

(3.0 ft.-9.8 ft.)

Approx.

1 cm

(

0.4

in.-

3.3

ft.)

(Wide-angle only)

EXPOSURE

(

SHUTTER SPEED AND APERTURE

)

PHOTOGRAPHY FUNCTIONS

Exposure refers to the light that hits the CCD or the total amount of captured light and determines

the brightness of the image.

The exposure is determined by the combination of aperture and shutter speed. In AE (Auto-

exposure), the camera determines the correct exposure, allowing for factors such as the brightness

of the subject and the sensitivity setting.

The graph at left shows the way the aperture and shutter speed settings can

be changed while maintaining the same exposure level.

h When the aperture is decreased by one step, the shutter speed also

decreases by one step (the dot moves upper left).

h When the aperture is increased by one step, the shutter speed also

increases by one step (the dot moves lower right).

h Combinations that result in the shutter speed or aperture being outside the

available range of settings cannot be selected (white dots).

h In the “

N”, “M” and “<” Photography modes, it is easy to select different

settings along this line.

h Selecting settings that run parallel to this line by adjusting the brightness of

the photographed image is referred to as exposure compensation.

OpenClosed

(

erture

)

Slow

(Shutter speed)

Fast

◆

When you cannot get the correct exposure

◆

AE lock: Determines and fixes the exposure at a target level. Use the following procedure to take a

picture using AE lock:

Press the “AE-L” button (sets and locks the

exposure). ➡ Press the shutter button down

halfway (sets and fixes the focus). ➡ Press

the shutter button down fully (takes the

picture).

Exposure compensation:

This function uses the exposure level set by

the AE function as a reference (0) and then brightens (+) or darkens (–) the image.

By selecting auto bracketing, you can shoot 3 frames, one underexposed (–), one at the

reference exposure (0) and one overexposed (+).

(–) (0) (+)

Closed Open

When shooting a moving subject, you can either “freeze the motion” or “capture the sense of

movement” by adjusting the shutter speed.

Freezes the motion of the

subject.

Photographs the traces left

by the subject’s movement.

By adjusting the aperture, you can change the depth of focus (depth of field).

The area in front of and

behind the subject is also

in focus in the shot.

The area in front of and

behind the subject is out of

focus.

Fast Slow

Shutter speed

Aperture

Main subject

Fujifilm Finepix S9000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info