Bedienungsanleitung Fujifilm Finepix S9000 (Seite 67 von 73) (Englisch)

510418

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

133

Troubleshooting Possible causes Solutions

The camera does not

emit any sound.

Frame erase does not

erase the frame.

The ERASE ALL function

does not erase all the

frames.

Screens are not

displayed in English.

There is no image or

sound on the TV.

The TV image is black

and white.

When connecting the

camera to a PC, the

photographed image or

playback image appears

on the camera’s screen.

Nothing happens when

using the Mode dial.

The camera no longer

works correctly.

Cannot print with

PictBridge.

The camera was

connected to a PC when

the USB mode was set to

“

”.

i The camera volume is set too low.

i The microphone was blocked during

shooting/recording.

i There is something covering the speaker

during playback.

Some frames may be protected.

A language other than English is selected in

the “

” setting in the “

” SET-

UP menu (➡P.100).

i The included A/V cable was connected

during movie playback.

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The “

” video output setting is incorrect.

i The TV volume is turned down.

The “

” video output setting is incorrect.

i The USB cable (mini-B) is not correctly

connected to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The batteries have run out.

The camera has suffered an unforeseen

problem.

“

” PICTBRIDGE is not selected in “

”

USB mode in the “

” SET-UP menu.

i Adjust the volume.

i Take care not to block the microphone

during shooting/recording.

i Make sure that the speaker is uncovered.

Unprotect frames using the camera on which

the protection was first applied.

1Press the “MENU/OK” button to display the

menu.

2Press “a” or “b” to select “

” SET-UP and

press “c”.

3Press “a” or “b” to select “

” .

4Press “c”.

5Press “a” or “b” several times to select

“ENGLISH”.

6Press the “MENU/OK” button.

i After the movie playback mode is stopped,

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

i Change the setting to “NTSC” or “PAL”

(➡P.100).

i Adjust the volume.

Change the setting to “NTSC” or “PAL”

(➡P.100).

i Set up the camera, and connect the USB

cable (mini-B) correctly.

i Turn the PC on.

i Briefly remove the batteries or disconnect

the AC power adapter. Then reload the

batteries or reconnect the AC power adapter

and try again.

i Load new or fully charged batteries.

Briefly remove the batteries or disconnect the

AC power adapter. Then reload the batteries

or reconnect the AC power adapter and try

again. If you think the camera is faulty,

contact your FUJIFILM dealer.

Select “

” PICTBRIDGE in “

” USB

mode in the “

” SET-UP menu.

Perform steps 1 to 3 to remove the camera

from the PC.

h Windows

The “New Hardware Found” wizard or

“Scanner and Camera” wizard appears. If the

wizard does not appear, proceed to step

Click the [Cancel] button.

Disconnect the camera from the PC.

h Macintosh

The window for locating the driver appears.

If the window does not appear, proceed to

step

Click the [Cancel] button.

Disconnect the camera from the

Macintosh.

Troubleshooting Possible causes Solutions

132

Troubleshooting eIf you think the camera is faulty, check the following once more.

No power.

Power cuts out during

operation.

Batteries run out quickly.

No photograph is taken

when pressing the

shutter button.

Focusing is slow.

Cannot set the camera to

Macro (close-up) mode.

Cannot select continuous

shooting.

Cannot set exposure

compensation.

Cannot use the flash.

The flash settings are

restricted and cannot be

selected.

The playback image is

dark even though the

flash was used.

The image is blurred.

There is speckling on the

image.

i The batteries have run out.

i The AC power adapter plug has come out of

the power outlet.

i The batteries are loaded backwards.

i The battery cover is not closed correctly.

i The camera has been left for a long period

with batteries and AC power adapter

removed.

The batteries have run out.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The batteries can no longer be recharged.

i The rechargeable batteries (if used) have

become deactivated, or the battery capacity

has diminished due to the memory effect.

i No media is inserted.

i The media is full.

i The media is not formatted.

i The xD-Picture Card contact area is soiled.

i The media is damaged.

i The batteries have run out.

The external AF sensor is dirty.

Photography mode is set to “

”, “

” or “

”.

Multiple exposure mode is selected.

The Mode dial is set to “

”, “

√

”, “

”,

“

”, “

” or “>”.

i The shutter button was pressed while the

flash was charging.

i The flash is not popped up.

i The batteries have run out.

i The camera is set to “

” or “

” in

Photography mode.

i Continuous shooting is selected.

i Super macro mode is selected.

The Photography mode is set to “

”,

“

√

”, “

” or “

”.

i The subject is too far away.

i Your finger was covering the flash.

i The lens is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without selecting

Macro mode.

i You are shooting a subject that is not suited

to autofocusing.

The picture was taken with a slow shutter

speed (long exposure) in a high-temperature

environment.

i Load new or fully charged batteries.

i Plug the adapter back in.

i Load the batteries in the correct direction.

i Close the battery cover correctly.

i Load the batteries or connect the AC power

adapter, and wait a short time before turning

the camera on.

Load new or fully charged batteries.

i Put the batteries in your pocket or another

warm place to heat them and then load them

into the camera just before you take a picture.

i Wipe the battery terminals with a clean, dry

cloth.

i Load new or fully charged batteries.

i Use the rechargeable battery discharging

function to restore the rechargeable

batteries to full capacity.

i Insert a media.

i Insert a new media or erase some unwanted

frames.

i Format the media on the camera.

i Wipe the xD-Picture Card contact area with

a clean, dry cloth.

i Insert a new media.

i Load new or fully charged batteries.

Use a blower brush to brush away any dust and

then gently wipe the sensor with a soft, dry cloth.

Change the Photography mode to “

”,

“

√

”, “

” or “

”.

Set multiple exposure mode to “OFF”.

Change the Photography mode.

i Wait until the charging is completed before

pressing the shutter button.

i Pop up the flash.

i Load new or fully charged batteries.

i Change the Photography mode.

i Set continuous shooting to “OFF”.

i Cancel Super macro mode.

The flash settings are restricted because the

camera settings are tailored to the scene

being shot. Change the Photography mode for

a wider range of flash settings.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock or “MF” Manual focus mode

to take the picture.

This is a characteristic of CCDs and does not

indicate a camera fault.

Fujifilm Finepix S9000 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info