Bedienungsanleitung Fujifilm Finepix S9100 (Seite 52 von 83) (Englisch)

41373

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

103

Settings

ADJUSTING SCREEN BRIGHTNESS

To adjust screen brightness:

1Press “d ” or “c ” to adjust the screen

brightness.

2Press the “MENU/OK” button to confirm the new

setting.

445

+3 2 1

1 2 3 4 5

SETSE T CANCELCA NCE L

01 02

≤

CCD-RAW

Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received

from the CCD as an image) performed on the camera. Consequently, this task must be performed

on the PC.

Conversion using FinePixViewer also provides a simple way to create TIFF-format images.

Conversion using Hyper-Utility2 also provides you to specify parameters such as image format,

tone, white balance, sharpness, saturation, and brightness during file conversion.

✽ To rebuild images, FinePixViewer (on the bundled CD-ROM “Software for FinePix CX”) or Hyper-Utility2 (on the bundled

CD-ROM “Hyper-Utility Software HS-V2”) must be installed on your PC.

■ The functions listed below cannot be used in CCD-RAW mode.

During shooting

Digital zoom, Continuous shooting and Quality are unavailable.

During playback

Playback can be zoomed up to 2.5×, but cropped images cannot be saved.

102102

SET-UP

✽ How to use the SET-UP menu (➡P.98)

PLAYBACK VOLUME

Adjust volume while playing back movie and voice

memo.

1Press “d” or “c” to adjust the volume. The

larger the number, the larger the volume is

emitted. “0” indicates a sound deadening.

2Press the “MENU/OK” button to confirm the new

setting.

110 2 3 4

8 9 101 0

SETSE T CANCELCA NCE L

01 02

FRAME NO.

Specifies whether frame numbers are assigned

consecutively from previous numbers or begin

again.

CONT.: Pictures are stored beginning from the

highest file number stored on the last

media used.

RENEW: Pictures are stored on each media

beginning with a file number “0001”.

Setting this function to “CONT.” makes file

management easier as it makes sure that file

names are not duplicated when images are

downloaded to a PC.

●

When the camera settings are “úRESET”, the frame

number setting (“CONT.” or “RENEW”) is changed to

“CONT.” and the frame number itself does not return to

“0001”.

●

When the media already contains image files with file

numbers higher than the highest file number on the last

media, images are stored beginning from the highest file

number on the current media.

Formatted media used for both A and B.

0001

0005

0006

0010

0001

0005

0001

0005

< CONT. >< RENEW >

Check the file number by viewing the image. The

last 4 digits of the 7-digit number in the top right

corner of the screen are the file numbers, while the

first 3 digits show the directory number.

●

When changing the media, always turn the camera off before

opening the slot cover. Opening the slot cover without turning

the camera off may cause the frame number memory to not

function.

●

File number runs from 0001 to 9999. Once 9999 is exceeded,

the directory number changes from 100 to 101. The

maximum number is 999-9999.

●

The displayed frame number may differ for images

photographed on other cameras.

●

When [FRAME NO. FULL] appears, see P.142.

Directory number

File number

Frame number

6/24/2006 10:00 AM

100-0001

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S9100 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix S9100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info