Bedienungsanleitung Fujifilm Finepix S9100 (Seite 63 von 83) (Englisch)

41373

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

125

Viewing Images

124

●

Movies and images with CCD-RAW cannot be printed.

●

Images photographed with a camera other than FinePix

S9100 / FinePix S9600 may not be printed.

1Press “d” or “c” to display the frame (file) for

which you want to specify PRINT settings.

2Press “a” or “b” to set a value up to 99 as the

number of copies of the frame (file) to be printed.

For frames (files) that you do not want printed,

set the number of prints to 0 (zero).

To specify more PRINT settings, repeat steps 1

and 2.

3Always press the “MENU/OK” button after the

settings are completed.

SHEETSSH EET S

TOTALTOTAL

:00009

YESYES CANCELCA NCE L

FRAMEFR AME

01 02 03

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —

PictBridge FUNCTION

“PRINT OK?” appears on the screen. Press the

“MENU/OK” button to begin printing.

Disconnecting the printer

1Check that “PRINTING” is not displayed on the

camera’s screen.

2Turn the camera off. Unplug the USB cable

(mini-B).

USB socket

(mini-B)

Printer starts printing the specified number of

prints.

●

Press the “DISP/BACK” button to cancel the printing.

Depending on the printer, the printing may not be canceled

immediately or printing may stop midway through. When

printing stops midway, briefly turn the camera off and then on

again.

PRINTINGP RINT ING

CANCELCA NCE L

1/9

SHEETSSH EET S

CANCELCA NCE L

PRINT OK?PRI NT O K?

TOTAL:TO TA L :

SHEETSSH EET S

YES YES

CANCEL CA NCE L

PICTBRIDGEPI CTB RID GE

SETSE T

ENGLISHEN GLI SH

OKOK

SETSE T

01 03

6.2.2 Specifying images for printing without using DPOF

(

single-frame printing

)

AC-5VX

USB socket

(mini-B)

1Connect the camera to the printer using the USB

cable (mini-B).

2Turn the printer on.

Set the Power switch to “w”.

“CHECKING USB” appears and then the menu is

displayed on the screen.

●

If the menu does not appear, check whether the “ò” USB

MODE setting is

“

®”

PICTBRIDGE.

●

Depending on the printer, some functions are disabled.

●

The camera cannot be used to specify printer settings such

as the paper size and print quality.

●

Please connect the AC Power Adapter AC-5VX (sold

separately) to your camera.

●

Use a media that was formatted on FinePix S9100 / FinePix

S9600.

1Set the Power switch to “w” to turn the camera

on.

2Select “®” PICTBRIDGE in “ò” USB MODE

in the “˜” SET-UP menu (➡P.100).

3Set the Power switch to “OFF” to turn the

camera off.

●

Do not connect to a PC when the “ò” USB MODE setting is

set to “

®” PICTBRIDGE. See P.146 if you connect to a PC

by mistake.

CHECKING USBCH ECK ING USB

PICTBRIDGEPI CTB RID GE

●

“PRINT WITH DATE” is not available when the camera is

connected to a printer that does not support date printing.

1Press “a” or “b” to select “PRINT WITH DATE”

or “PRINT WITHOUT DATE”. If “PRINT WITH

DATE” is selected, the date is imprinted on your

prints.

2Press “c”.

01 02

PRINT WITHOUT DATEPRI NT W ITH OUT DATE

PRINT DPOFPR I NT D POF

OKOK

PICTBRIDGEPI CTB RID GE

PRINT WITH DATEPR INT WIT H D ATE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S9100 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix S9100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info