Bedienungsanleitung Fujifilm Finepix S9100 (Seite 72 von 83) (Englisch)

41373

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

143142

Warning Displays eThe table below lists the warnings that are displayed on the screen.

READ ERROR

i The played back file was not recorded

correctly.

i The xD-Picture Card contact area is

soiled.

i Camera fault.

i An attempt was made to play a movie or

display an image that was not recorded

on this camera.

i Images cannot be played back.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the message still

appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i Movies and images cannot be played back.

FRAME NO. FULL

The frame number has reached 999-9999.

1 Insert a formatted media into the camera.

2 Set “RENEW” as the FRAME NO. setting in

the “SET-UP” menu.

3 Start taking pictures (The frame number starts

from “100-0001”).

4 Set “CONT.” as the FRAME NO. setting in the

“SET-UP” menu.

Warning Displayed Explanation Remedy

(Lit red)

(Blinking red)

The camera batteries are low or

completely out of charge.

Load new or fully charged batteries.

There is a strong likelihood of camera

shake because the shutter speed is slow.

Use flash photography. However, use a tripod for

some scenes and modes.

The AF (autofocus) cannot work effectively.

i If the image is too dark, take the picture at a

distance of around 2 m (6.6 ft.) from the subject.

i Use AF lock to take the picture.

i Select Macro mode when taking close-up shots.

Outside the AE continuous range. The picture can be taken, but the correct

brightness (exposure) will not be obtained.

Camera malfunction or fault.

NO CARD

CARD NOT INITIALIZED

CARD ERROR

CARD FULL

BUSY

WRITE ERROR

FOCUS ERROR

ZOOM ERROR

i Turn the camera on again, taking care not to

touch the lens.

i Turn the camera off and on again. If the

message still appears, contact your FUJIFILM

dealer.

No media is inserted. Insert a media.

i The media is not formatted.

i The xD-Picture Card contact area is

soiled.

i Camera fault.

i Format the media on the camera.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the message still

appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i The xD-Picture Card contact area is

soiled.

i The media format is incorrect.

i Camera fault.

i The media is damaged.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to

format the xD-Picture Card. If the message still

appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The media is full. Erase some images or use a media that has

ample free space.

i The data could not be recorded due to a

media error or a connection error

between the media and camera.

i The image cannot be recorded as it is

too large to fit in the available space on

the media.

i The xD-Picture Card is not formatted.

i Re-insert the media or turn the camera off and

then on again. If the message still appears,

contact your FUJIFILM dealer.

i Use a new media.

i Format the xD-Picture Card on the camera

(➡P.104).

The timing for recording was incorrect

because the media was formatted on a PC.

Use a media that was formatted on the camera.

Aperture/Shutter speed display

(Lit red)

An attempt was made to show 5,000 or

more images by date sorting.

No more than 4,999 images can be shown by

date sorting.

TOO MANY FRAMES

An attempt was made to specify DPOF

settings for an image that is not supported

by DPOF.

DPOF printing cannot be used with this image

format.

CAN NOT SET DPOF

r CAN NOT SET DPOF

Displayed for PictBridge. This message appears when printing is performed

from a FUJIFILM printer that supports PictBridge.

Refer to the Owner’s Manual for the printer for

details.

The camera is not connected to a PC or

printer.

i Check that the USB cable (mini-B) is connected

correctly.

i Check that your printer is turned on.

Displayed for PictBridge.

i Check that the printer is not out of paper or out

of ink.

i Turn the printer off briefly and then turn it back

on.

i Refer to the user manual supplied with your

printer.

Displayed for PictBridge. Check that the printer is not out of paper or out of

ink. Printing automatically restarts when the error

is cleared. If the message still appears after

checking, press the “MENU/OK” button to restart

printing.

Displayed for PictBridge.

i Refer to the user manual for the printer being

used and check whether the printer supports the

JFIF-JPEG or Exif-JPEG image format. If not,

the printer cannot print the images.

i Movies and images with CCD-RAW cannot be

printed.

i Was the image data photographed using

FinePix S9100 / FinePix S9600?

You may not be able to print some images

photographed on other cameras.

COMMUNICATION

ERROR

PRINTER ERROR

RESUME?

CANNOT BE PRINTED

u PRINTING

Warning Displayed Explanation Remedy

i A protected file was encountered.

i An attempt was made to add a voice

memo to protected file.

i An attempt was made to rotate a

protected file.

i Protected files cannot be erased. Remove the

protection.

i Protected files cannot be added to voice

memos. Remove the protection.

i Protected files cannot be rotated. Remove the

protection.

i The voice memo file is faulty.

i Camera fault.

i The voice memo cannot be played back.

i Contact your FUJIFILM dealer.

i An attempt was made to trim an image

shot using a camera other than FinePix

S9100 / FinePix S9600.

i The image is damaged.

The image cannot be trimmed.

Prints were specified for 1000 or more

frames in the DPOF frame settings.

The maximum number of frames for which prints

can be specified on the same media is 999.

Copy the images for which you want to order

prints onto another media and then specify the

DPOF settings.

t ERROR

An attempt was made to trim a 0.3M image

or an image shot with the RAW setting.

The image cannot be trimmed.

` CAN NOT TRIM

~ CAN NOT TRIM

CAN NOT TRIM

DPOF FILE ERROR

PROTECTED FRAME

An attempt was made to rotate a movie. These images cannot be rotated by image

formats.

r CAN NOT ROTATE

Fujifilm Finepix S9100 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix S9100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info