Bedienungsanleitung Fujifilm Finepix S9100 (Seite 73 von 83) (Englisch)

41373

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

145

Troubleshooting Possible causes Solutions

Troubleshooting eIf you think the camera is faulty, check the following once more.

No power.

Power cuts out during

operation.

Batteries run out quickly.

No photograph is taken

when pressing the

shutter button.

Focusing is slow.

Cannot set the camera to

Macro (close-up) mode.

Cannot select continuous

shooting.

Cannot set exposure

compensation.

Cannot use the flash.

The flash settings are

restricted and cannot be

selected.

The playback image is

dark even though the

flash was used.

The image is blurred.

There is speckling on the

image.

i The batteries have run out.

i The AC power adapter plug has come out of

the power outlet.

i The batteries are loaded backwards.

i The battery cover is not closed correctly.

i The camera has been left for a long period

with batteries and AC power adapter

removed.

The batteries have run out.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The batteries can no longer be recharged.

i The rechargeable batteries (if used) have

become deactivated, or the battery capacity

has diminished due to the memory effect.

i No media is inserted.

i The media is full.

i The media is not formatted.

i The xD-Picture Card contact area is soiled.

i The media is damaged.

i The batteries have run out.

The external AF sensor is dirty.

Photography mode is set to “

”, “

” or “

”.

Multiple exposure mode is selected.

The Mode dial is set to “

”, “

√

”, “

”,

“

”, “

” or “>”.

i The shutter button was pressed while the

flash was charging.

i The flash is not popped up.

i The batteries have run out.

i The camera is set to “

” or “

” in

Photography mode.

i Continuous shooting is selected.

i Super macro mode is selected.

The Photography mode is set to “

”,

“

√

”, “

” or “

”.

i The subject is too far away.

i Your finger was covering the flash.

i The lens is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without selecting

Macro mode.

i You are shooting a subject that is not suited

to autofocusing.

The picture was taken with a slow shutter

speed (long exposure) in a high-temperature

environment.

i Load new or fully charged batteries.

i Plug the adapter back in.

i Load the batteries in the correct direction.

i Close the battery cover correctly.

i Load the batteries or connect the AC power

adapter, and wait a short time before turning

the camera on.

Load new or fully charged batteries.

i Put the batteries in your pocket or another

warm place to heat them and then load them

into the camera just before you take a picture.

i Wipe the battery terminals with a clean, dry

cloth.

i Load new or fully charged batteries.

i Use the rechargeable battery discharging

function to restore the rechargeable

batteries to full capacity.

i Insert a media.

i Insert a new media or erase some unwanted

frames.

i Format the media on the camera.

i Wipe the xD-Picture Card contact area with

a clean, dry cloth.

i Insert a new media.

i Load new or fully charged batteries.

Use a blower brush to brush away any dust and

then gently wipe the sensor with a soft, dry cloth.

Change the Photography mode to “

”,

“

√

”, “

” or “

”.

Set multiple exposure mode to “OFF”.

Change the Photography mode.

i Wait until the charging is completed before

pressing the shutter button.

i Pop up the flash.

i Load new or fully charged batteries.

i Change the Photography mode.

i Set continuous shooting to “OFF”.

i Cancel Super macro mode.

The flash settings are restricted because the

camera settings are tailored to the scene

being shot. Change the Photography mode for

a wider range of flash settings.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock or “MF” Manual focus mode

to take the picture.

This is a characteristic of CCDs and does not

indicate a camera fault.

144

MICRODRIVE IS

OVERHEATING MOVIE

RECORDING WILL

AUTOMATICALLY

STOP SOON

MOVIE RECORDING

HAS STOPPED

CANNOT RESTART A

WHILE

An attempt was made to shoot a movie

when the Microdrive was too hot.

Turn the camera off and stop using it for about 30

minutes until it has cooled down. Note that you

can shoot still images during this period.

Warning Displayed Explanation Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S9100 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Finepix S9100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info